Abstract:This study focuses on the fabrication of fiber membranes containing different concentrations of AgNO3 via the electrospinning technique. The AgNO3 present in the fibers is subsequently reduced to silver nanoparticles (Ag NPs) through UV irradiation. The resulting nanofiber film is characterized using scanning electron microscopy, X-ray diffraction, and evaluations of its anti-UV and anti-electromagnetic radiation properties. Experimental results demonstrate that increasing the AgNO3 content initially decreases and then increases the fiber diameter and fiber diameter deviation. Under UV light, the nanofibers fuse and bond, leading to an increase in the fiber diameter. AgNO3 is effectively reduced to Ag NPs after UV irradiation for more than 60 min, as confirmed by the characteristic diffraction peaks of Ag NPs in the XRD spectrum of the irradiated AgNO3/PVB fibers. The nanofiber film containing AgNO3 exhibits superior anti-UV performance compared to the film containing AgNO3-derived Ag NPs. The anti-electromagnetic radiation performances of the nanofiber films containing AgNO3 and AgNO3-derived Ag NPs are similar, but the nanofiber film containing AgNO3-derived Ag NPs exhibits higher performance at approximately 2.5 GHZ frequency. Additionally, at an AgNO3 concentration of less than 0.5 wt%, the anti-electromagnetic radiation performance is poor, and the shielding effect of the nanofiber film on medium- and low-frequency electromagnetic waves surpasses that on high-frequency waves. This study provides guidance for the preparation of polyvinyl butyral nanofibers, Ag NPs, and functional materials with anti-ultraviolet and anti-electromagnetic radiation properties.

Fabrication of the Silver/polypyrrole/polyacrylonitrile Composite Nanofibrous Mats

Thermoplastic polyurethane/silica nanocomposite fibers by electrospinning

Characterization and Morphology of Composites Prepared from Polyacrylonitrile and Silver Nitrate

Electrical Conductance Mechanism of Silver–Polyacrylonitrile Nanocomposite Fibers

Conductive Polymers/polyacrylonitrile Composite Fibers: Fabrication and Properties

Poly(Methyl Methacrylate)/Silica Nanocomposite Fibers by Electrospinning

Fabrication of Conductive and Fibrillar Composite Fibers Via In-Situ Chemical Oxidization Polymerization

Facile Synthesis and Assembly of Ag/NiO Nanofibers with High Electrical Conductivity

Nanostructured Electrospun Hybrid Graphene/Polyacrylonitrile Yarns

Synthesis and Characterization of Coaxial Silver/silica/polypyrrole Nanocables

Fabrication of Unidirectional Water Permeable PS/PET Composite Nanofibers Modified with Silver Nanoparticles via Electrospinning

Preparation of polypyrrole-au composite on electrospun poly(4- vinylpyridine) fibers

A Facile Method for Electrospinning of Ag Nanoparticles/Poly (vinyl Alcohol)/Carboxymethyl-Chitosan Nanofibers

Multi-Functional Electrospun AgNO3/PVB and Its Ag NP/PVB Nanofiber Membrane

SYNTHESIS AND CHARACTERISTICS OF POLYACRYLONITRILE (PAN) NANOFIBER MEMBRANE USING ELECTROSPINNING METHOD

Preparation of silver nanowires and their application in conducting polymer nanocomposites

A Novel Conductive Composites: Preparation And Electrical Property Of Polypyrrole Coated Carbon Nanotubes

Facile Fabrication of Silver Nanoparticles Deposited Cellulose Microfiber Nanocomposites for Catalytic Application

Metallization of Electrospun Polyacrylonitrile Fibers by Gold

Nanoporous Structured Submicrometer Carbon Fibers Prepared Via Solution Electrospinning of Polymer Blends.

Synthesis of Hollow PVP/Ag Nanoparticle Composite Fibers via Electrospinning under a Dense CO2 Environment