Abstract:The data of extruding temperature of 6063 aluminum alloy 8884A-0.8 has been gathered,analyzed and regressed.The deformation ratio of the profile was 92.The extrusion speed were 6 mm/s,8 mm/s and 10 mm/s separately.The heating temperature of the ingot before extrusion were 480℃,500℃ and 520℃.The extrusion mold temperature were 420℃ and 450℃ separately.The analyzed results show that during the extrusion starting 20 mm the extrusion temperature rises 75℃-100℃ suddenly,then tends to go smoothly,during the finishing 50 mm the temperature goes down slightly;the higher extrusion speed the higher temperature rising;the higher stock temperature the smaller extrusion temperature rising;the higher mold temperature the higher temperature rising at the condition of higher extrusion speed(10 mm/s).The mold temperature does not affect the temperature rising at the condition of slow extrusion speed(6 mm/s,8 mm/s).The calculated mathematics model conforms the tested data,so it can be used to calculate the temperature rising of 884A-0.8 profile at the model exit under various extrusion process conditions.

Study on Temperature Rising Mode of 6063 Aluminum Alloy During Extrusion