Abstract:The characterization of steel fiber concrete in a flexural test or tensile uniaxial test requires greater control of loading rate by the speed applied in the test machine, to be able to report more accurately the behavior of displacements or crack openings in micro‐scale possible. In general, in the pre‐dimensioning process, it is often discarded the characterization tests and the main standards do not provide theoretical design recommendations concerning the residual strengths of fibrous concrete. Some empirical models in the literature attempt an approximation of the theoretical design values, but they present greater dispersion in the results. This article proposes empirical equations for predicting the residual strengths of the steel fiber reinforced concrete (SFRC), for small fiber volume fractions (approx. < 0.8%). Experimentally notched beams subjected to three‐point bending tests were collected, with the concrete matrix composed of hook‐end steel fiber and the experimental residual strengths presenting the softening behavior in the load‐opening ratio curve of the crack. The experimental residual strengths were compared with other empirical models found in the literature. The results showed that the maximum stress of the steel fiber pullout model established satisfactory relationships with the residual stresses in flexure. The empirical proposed residual strength model presented lower variability of dispersion around 10%, the mean absolute percentage error of 8%, compared to other usual empirical models and had the same material class with the experimental results, proving to be a viable alternative for pre‐design and dosage optimization for SFRC. Empirical equations for flexural residual strengths, steel fiber reinforced concrete (SFRC), hook‐end steel fiber.

Applications of Stress Crack Width Relationship in Predicting the Flexural Behavior of Fibre-Reinforced Concrete

Analysis-oriented Stress–strain Models for FRP–confined Concrete

Experimental Investigation on First Crack Strength and Crack Widthof Reinforced Concrete Beamsby Side-Bonding Cfrp Sheets

Stress-Strain Behaviour Of Frp-Confined Concrete Subjected To Eccentric Compression

Evaluation of Main Code Models for Predicting Flexural Load-Bearing Capacity Against Intermediate Crack-Induced Debonding in Frp-Strengthened Rc Beams

Fatigue life prediction of fiber reinforced concrete under flexural load

Crack bridging model for fibre reinforced concrete under fatigue tension

Mesoscale modeling of flexural fracture behavior in steel fiber reinforced concrete

Numerical Analysis for Crack Width of Reinforced Concrete Beam with Bond-Slip Effect

A New Flexural Strength Model of CFRP-strengthened RC Beams with Intermediate Crack Induced Debonding Failure

Simulation of Crack Propagation in Fiber-Reinforced Concrete by Fracture Mechanics

Investigation On Flexural Behavior Of Reinforced Concrete Beams Flexurally Strengthened By Different Methods

Fracturing behaviors of FRP-strengthened concrete structures

Whole-process Crack Width Prediction of Reinforced Concrete Structures Considering Bonding Deterioration

Design of steel fiber reinforced concrete based on stress-crack opening relationship

Empirical equations for flexural residual strengths in concrete with low volumetric fractions of hook‐end steel fiber

Flexural Capacity Prediction Model for Steel Fibre-Reinforced Concrete Beams

Behavioral Simulation Model for Sfrc and Application to Flexural Fatigue in Tension

Crack width of reinforced concrete beams strengthened with CFRP sheets

Effect of cracks on interfacial stresses in RC beams strengthened with pre-stressed hybrid fibre sheets

Rate-dependence of the tensile behaviour of fibre reinforced concrete in the quasi-static regime