Abstract:The magneto-mechanical coupling effect of ferromagnetic materials is the result of macroscopic influence of mechanical properties on magnetic properties under the combined action of stress field and applied magnetic field, which essentially can be attributed to the change of material properties caused by the transformation of microscopic magnetic domain structures. The effect of applied magnetic field is mainly manifested as the change of magnetic moment cluster (direction and size) inside microscopic magnetic domain; The stress field mainly causes the movement and rotation of the domain walls inside the ferromagnetic material, and further causes the change of magnetic moment cluster. Taking Q235 low carbon steel as an example, the effects of tensile stress σ t on some important magnetic parameters of ferromagnetic materials under different excitation intensities (i.e., H 0 ), such as the maximum value of applied magnetic field H max , intrinsic coercive field H cj , hysteresis loss power per unit volume p h and anhysteretic magnetization M an , were obtained by setting macroscopic magneto-mechanical coupling test and fully considering the influence of demagnetizing field H d (The standard ring specimen was used for demagnetization correction of the non-standard strip specimen). Meanwhile, the basic magnetization characteristics of ferromagnetic materials were discussed by introducing the basic magnetization curve F ( H 0 , B an ) and considering the effect of σ t as the equivalent stress field H σ based on the theory of microscopic magnetic domain and the principle of thermodynamic. In the range of 635.4 A/m ≤ H 0 ≤ 928.6 A/m and 0 MPa ≤ σ t ≤ 350 MPa, the theoretical calculation models M an ( H 0 , σ t ) and H σ ( H 0 , σ t ) in the magneto-mechanical coupling effect were obtained, which are in good agreement with the experimental results.

Study of Magnetic Field Gradient in Geomechanical Model Test

Construction Of Uniform Gradient Magnetic Field In Geomechanics Magnetic Model Test

Finite Element Analysis of Gradient Z-Coil Induced Eddy Currents in a Permanent MRI Magnet

Principle and engineering application of geomechanics magnetic model test

STUDY OF MAGNETIC MATERIAL PROPERTY OF GEOMECHANICAL MODEL TEST IN ELECTROMAGNET FIELD

Magnetic Field Design and Research of Passive Adaptive MR Damper

Multi-field Coupling Model of Embedded Giant Magnetostrictive Components Optimization

Simulation and Experimental Study of the Coupling Drive Magnetic Field for Embedded Giant Magnetostrictive Actuators

Study of similarity theory of geomechanical model test in electromagnetic field

Effects of Magnetic Field Gradient on Particle Distributions of Suspension Comprised of both Magnetic and Nonmagnetic Particles Using Two-Dimensional Monte Carlo Simulations

Feasibility of application of technology of geomechanical magnetic model tests to physical model tests on landslides

Design, Regulation, and Fast Measurement Method of Weak Magnetic Force Gradient Based on Superconducting Gravimeter

Magnetic Field Aberration Induced by Cycle Stress

Magneto-mechanical coupling effect of ferromagnetic materials: Test characteristics and theoretical model

Magnetically Actuated Functional Gradient Nanocomposites for Strong and Ultra-Durable Biomimetic Interfaces/Surfaces

A Magnetomechanical Model for the Magnetic Memory Method

A General Nonlinear Magnetomechanical Model for Ferromagnetic Materials under A Constant Weak Magnetic Field

Study on mathematic magnetic field model of rectangular coils for magnetic actuation

Design of gradient coils for permanent magnets

Effect of alternating gradient magnetic field on heat transfer enhancement of magnetoreological fluid flowing through microchannel

Research on a theoretical model of magnetic nondestructive testing for ferromagnetic materials based on the magneto–mechanical coupling effect