Abstract:A LiFePO4 material with ordered olivine structure is synthesized from amorphous FePO4 · 4H2O through a solid–liquid phase reaction using (NH4)2SO3 as the reducing agent, followed by thermal conversion of the intermediate NH4FePO4 in the presence of LiCOOCH3 · 2H2O. Simultaneous thermogravimetric–differential thermal analysis indicates that the crystallization temperature of LiFePO4 is about 437 °C. Ellipsoidal particle morphology of the resulting LiFePO4 powder with a particle size mainly in the range 100–300 nm is observed by using scanning electron microscopy and transmission electron microscopy. As an electrode material for rechargeable lithium batteries, the LiFePO4 sample delivers a discharge capacity of 167 mA h g–1 at a constant current of 17 mA g–1 (0.1 C rate; throughout this study n C rate means that rated capacity of LiFePO4 (170 mA h g–1) is charged or discharged completely in 1/n hours), approaching the theoretical value of 170 mA h g–1. Moreover, the electrode shows excellent high‐rate charge and discharge capability and high electrochemical reversibility. No capacity loss can be observed up to 50 cycles under 5 C and 10 C rate conditions. With a conventional charge mode, that is, 5 C rate charging to 4.2 V and then keeping this voltage until the charge current is decreased to 0.1 C rate, a discharge capacity of ca. 134 mA h g–1 and cycling efficiency of 99.2–99.6 % can be obtained at 5 C rate.

Structural and Electrochemical Characterization of LiFePO4 Synthesized by an HEDP-based Soft-Chemistry Route

High‐Rate LiFePO4 Electrode Material Synthesized by a Novel Route from FePO4 · 4H2O

Synthesis and Characterization of LiFePO4 by a New Synthetic Route

Electrochemical Performance of LiFePO<sub>4</sub>/C Synthesized Via Aqueous Solution-Evaporation Route

Controllable Synthesis and Morphology Evolution of Hierarchical LiFePO4 Cathode Materials for Li-ion Batteries

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

Synthesis, characterization and properties of LiFePO4/C cathode material

Ultrafast Fabrication of LiFePO 4 with High Capacity and Superior Rate Cycling Performance for Lithium Ion Batteries

Synthesis and electrochemical properties of LiFePO4/C composite cathode materials

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Synthesises, Characterizations and Electrochemical Properties of Spherical-Like LiFePO4 by Hydrothermal Method

Improvement of Electrochemical Performance of LiFePO4 Cathode Materials for Lithium-Ion Battery

LiFePO4 Cathode Materials with Enhanced Performance Prepared by a Novel Solid-State Method

Preparation and Characteristic of High-Density Spherical LiFePO4

Shape Controlled Hydrothermal Synthesis and Characterization of LiFePO4 for Lithium Ion Batteries

High‐rate Lithium Iron(II) Phosphate as Cathode Material for Rechargeable Lithium Batteries

Synergetic Effect of the Crystallinity, Particle Size of LiFePO4 and the In-Situ Introduced Fe2P on Its High-Rate Capability

Structural and Electrochemical Properties of Multihollow LiFePO[sub 4] for Lithium Battery Cathodes

Preparation of lithium iron phosphate with superior electrochemical performances from titanium white by-product ferrous sulfate

Characterization of LiFePO<sub>4</sub> Synthesized by Sol-Gel Processing