Experimental study on deformation behavior of saturated soft clay under bidirectional cyclic loading

Wang Changjing,Chen Yunmin

2010-01-01

Abstract:An undrained triaxial test was designed using GDS bidirectional dynamic testing system.The cyclic loading was simplified as unidirectional(axial) and bidirectional(axial and radial) sine wave.And the effect of radial cyclic loading on deformation behavior and cyclic strength of Xiaoshan soft clay was studied.The curves of axial strain against number of cycles for different axial cyclic stresses and radial cyclic stress ratios(the ratio of radial stress amplitude against axial stress amplitude) were presented.It is found that the strain curves for different radial stress ratios are close at the beginning of strain.But the difference between curves is bigger and bigger with the strain's increasing.The higher the radial cyclic stress ratio is,the faster the axial strain develops.And for a higher axial cyclic stress the difference between axial strain curves for different radial stress ratios is bigger.Taking 5% as the failure strain,the cyclic strength curves for different radial cyclic stress ratios were presented.It is shown that the cyclic strength curves under bidirectional cyclic loading are lower than that under unidirectional cyclic loading.But the difference between strength curves is small when the radial cyclic stress ratio is higher than 0.5.And its effect on the minimum limit cyclic strength is very weak;therefore the minimum limit cyclic strength under bidirectional cyclic loading can be substituted by that under unidirectional loading.