Abstract:Wind turbine blades experience excessive load due to inaccuracies in the prediction of aerodynamic loads by conventional methods during design, leading to structural failure. The blade element momentum (BEM) method is possibly the oldest and best-known design tool for evaluating the aerodynamic performance of wind turbine blades due to its simplicity and short processing time. As the turbine rotates, the aerofoil lift coefficient enhances, notably in the rotor’s inboard section, relative to the value predicted by 2D experimentation or computational fluid dynamics (CFD) for the identical angle of attack; this is induced by centrifugal pumping action and the Coriolis force, thus delaying the occurrence of stall. This rotational effect is regarded as having a significant influence on the rotor blade’s aerodynamic performance, which the BEM method does not capture, as it depends on 2D aerofoil characteristics. Correction models derived from the traditional hard computing mathematical method are used in the BEM predictions to take into account stall delay. Unfortunately, it has been observed from the earlier literature that these models either utterly fail or inaccurately predict the enhancement in lift coefficient due to stall delay. Consequently, this paper proposes a novel stall delay correction model based on the soft computing technique known as symbolic regression for high-level precise aerodynamic performance prediction by the BEM process. In complement to the correction model for the lift coefficient, a preliminary correction model for the drag coefficient is also suggested. The model is engendered from the disparity in 3D and 2D aerofoil coefficients over the blade length for different wind speeds for the NREL Phase VI turbine. The proposed model’s accuracy is evaluated by validating the 3D aerofoil coefficients computed from the experimental results of a second wind turbine known as the MEXICO rotor.

Research on the metnods of prediction of wind turbines' performance by bem theory and chimera-grid methodology

Les and Cdns Investigation of T106c Low Pressure Turbine

Large Eddy Simulation and CDNS Investigation of T106C Low-Pressure Turbine

Numerical Investigation of the Impact of Wind Turbine Rotor on the Passive Cooler above Nacelle

Effect of Relative Positions between Blade and Volute Tongue on Prediction of Performance in Simulation of Centrifugal Pump

Aerodynamic Noise Prediction of a Centrifugal Fan Considering the Volute Effect Using IBEM

ICOPE-15-C111 the Feasibility Study of Magnus Effect Based Device in Atmospheric Boundary Layer

Wind Turbine Performance in Controlled Conditions: BEM Modeling and Comparison with Experimental Results

Comparison of BEM-CFD and Full Rotor Geometry Simulations for the Performance and Flow Field of a Marine Current Turbine

The Improvement of Blade Element Momentum Theory in Horizontal Axis Wind Turbine Performance Analysis

Uncertainty Quantification Analysis in the Blade Element Momentum Method

Investigation of the validity of BEM for simulation of wind turbines in complex load cases and comparison with experiment and CFD

Hydrodynamic Design of Horizontal-Axis Marine Current Turbine Based on BEM Theory

Hybrid Aerodynamic Optimization of a Propeller Based on the Reformulated Blade Element Momentum Theory

Study of the Hydrodynamic Behavior of Horizontal Axis Tidal Turbines Based on the Blade Element Momentum Theory and Numerical Simulations

Analysis of the DANAERO wind turbine field database to assess the importance of different state‐of‐the‐art blade element momentum (BEM) correction models

Anti-cavitation optimal design and experimental research on tidal turbines based on improved inverse BEM

Novel Machine-Learning-Based Stall Delay Correction Model for Improving Blade Element Momentum Analysis in Wind Turbine Performance Prediction

An actuator line method for performance prediction of HAWTs at urban flow conditions: A case study of rooftop wind turbines

CFD simulations of aerodynamic characteristics for the three-blade NREL Phase VI wind turbine model

Prediction of 3D Aerodynamics Performance of Wind Turbines Using Potential Based Panel Method