Assessing of Natural Attenuation and Intrinsic Bioremediation Rates at A Petroleum-Hydrocarbon Spill Site: Laboratory and Field Studies

C. M. Kao,H. Y. Chien,R. Y. Surampalli,C. C. Chien,C. Y. Chen
DOI: https://doi.org/10.1061/(asce)ee.1943-7870.0000122
2010-01-01
Abstract:Natural attenuation is a passive remedial approach that depends upon natural processes to degrade and dissipate contaminants in soil and groundwater. Intrinsic bioremediation is believed to be the major process among the natural attenuation mechanisms that account for the reduction of contaminant concentrations. In this study, a mass flux approach was used to calculate the contaminant mass reduction at a petroleum-hydrocarbon spill site. The mass flux technique is a simplified mass balance procedure, which is accomplished using the differences in total contaminant mass flux across two cross sections of the contaminant plume. The mass flux calculation results show that up to 86% of the dissolved total benzene, toluene, ethylbenzene, and xylene (BTEX) isomers removal was observed via natural attenuation at this site. Evidence for the occurrence of natural attenuation was the decreased contaminant mass flux through the plume cross sections along the transport path and limited spreading of the BTEX plume. Evidences for the BTEX biodegradation include: (1) decreased BTEX concentrations along the transport path; (2) depletion of dissolved oxygen, nitrate, and sulfate; (3) production of dissolved ferrous iron, sulfide, methane, and CO(2); (4) deceased pH in the spill source area and increased pH in iron-reducing area; (5) increased alkalinity and microbial populations; and (6) preferential removal of certain BTEX components along the transport path. The effectiveness of intrinsic bioremediation on BTEX removal was evaluated by the in situ tracer method. Results reveal that approximately 74% of the BTEX removal was due to the intrinsic biodegradation process. The first-order decay model was applied for the natural attenuation and intrinsic bioremediation rates calculation. Results show that the biodegradation capacity (34.5 mg/L) for BTEX was much higher than the detected contaminants within the plume. The calculated total BTEX first-order natural attenuation and intrinsic bioremediation rates were 0.025 and 0.017% 1/day, respectively. Results of polymerase chain reaction, denaturing gradient gel electrophoresis, and nucleotide sequence analysis reveal that some petroleum-hydrocarbon degraders (Flavobacterium capsulatum, Xanthobacter sp., Xanthobacter flavus, Xanthomonas codiaei, Pseudomonas boreopolis, Methylobacterium sp., Reichenowia pictae) might exist at this site, which might contribute to the BTEX biodegradation. Results suggest that the natural attenuation mechanisms can effectively contain the plume, and the mass flux method is useful in assessing the occurrence and efficiency of the natural attenuation and intrinsic bioremediation processes.
What problem does this paper attempt to address?