Abstract:The oxidation of cyclohexane in the microchannels not only improves the safety of the reaction, but also the performance of the oxidation reaction. Different gas-liquid micro mixers were used for the mixing of gas and liquid before entering into microchannels, and SIMM-V2 performed best of all. Excellent slug/plug flow can be formed in the microchannels after mixing in the gas-liquid micro mixer when the molar ratio of oxygen to cyclohexane is less than 0.5:1. The conversion of cyclohexane increased as the residence time increased, but the selectivity of cyclohexanol and cyclohexanone increased first and then decreased. At the reaction temperature of 200 °C, with the flow rate of the solvent isopropanol being 1 mL/min and the molar ratio of oxygen to cyclohexane being 0.15:1, both the conversion of cyclohexane and selectivity of cyclohexanol and cyclohexanone increased with the increase of pressure. The conversion of cyclohexane and selectivity of cyclohexanol and cyclohexanone reached 10.10% and 66.93% respectively at the pressure of 8 MPa. It is indicated that the new process by use of uncatalyzed cyclohexane oxidation in the microchannels will have very attractive prospects in the improvement of the safety, intensification of the gas-liquid mass transfer and obtaining good reactive performance. Therefore, the technology shows good potential in industrial applications.

Cyclohexane Oxidation Over Size-Uniform Au Nanoparticles (SBA-15 hosted) in a Continuously Stirred Tank Reactor Under Mild Conditions

Solvent-free Oxidation of Cyclohexene over Catalysts Au/OMS-2 and Au/La-OMS-2 with Molecular Oxygen

Study of Cyclohexane Oxidation over Au/Al_2O_3 Catalyst

Study of cyclohexane oxidation over Au/Al2O3 catalyst

Coating of Au-Al2o3 Catalyst in the Wall of Microcapillary and Its Application in Cyclohexane Oxidation

Uncatalyzed Oxidation of Cyclohexane in the Microchannels

Preparation and Catalytic Activity of Au-Ag Bimetallic Catalyst for Cyclohexane Oxidation

Honeycomb-like Porous Ce–Cr Oxide/n-Doped Carbon Nanostructure: Achieving High Catalytic Performance for the Selective Oxidation of Cyclohexane to KA Oil

Preparation of Au Catalyst on Modified Sio2 Via Adsorbed-Layer Nanoreactor Technique

Halloysite Nanotubes Supported Gold Catalyst for Cyclohexene Oxidation with Molecular Oxygen

Effects of Process Conditions on Products Distribution of Cyclohexane Non-Catalytic Oxidation in Microcapillary

Surface Cobalt Silicate and CoO x Cluster Anchored to SBA-15: Highly Efficient for Cyclohexane Partial Oxidation

A Highly Active Au/Al2o3 Catalyst for Cyclohexane Oxidation Using Molecular Oxygen

Biosynthesized Au/TiO2@SBA-15 Catalysts for Selective Oxidation of Cyclohexane with O-2

A highly active Au/Al 2 O 3 catalyst for cyclohexane oxidation using molecular oxygen

Aerobic Oxidation of Cyclohexane on Catalysts Based on Twinned and Single-Crystal Au75pd25 Bimetallic Nanocrystals

Selective Oxidation of Cyclohexane to Cyclohexanone and Cyclohexanol over Au/Co3O4 Catalyst

Cyclohexane Oxidation Catalyzed by Au/Mxoyal2o3 Using Molecular Oxygen

Mesoporous SBA-15 supported gold nanoparticles for solvent-free oxidation of cyclohexane: superior catalytic activity with higher cyclohexanone selectivity

Cyclohexane Oxidation Catalyzed by Au/MxOyAl<sub>2</sub>O<sub>3</sub> Using Molecular Oxygen

Superior catalytic properties in aerobic oxidation of olefins over Au nanoparticles on pyrrolidone-modified SBA-15