Abstract:Large residual stresses in a laser-cladded surface coating over a metal part are detrimental to its mechanical integrity and fatigue life. In this study, a three-dimensional uncoupled thermo-mechanical finite element model was developed to predict (a) the evolution of the temperature field in a direct diode laser hot-wire multi-track cladding process and (b) associated thermally induced residual stress distribution in laser-cladded 316L stainless steel coatings on the A36 mild steel substrate. The thermal analysis of the finite element model of the laser cladding process was first validated by the time-resolved temperature measurements using thermocouples placed on the mild steel surface near the clad layer. The stress analysis of the finite element model during the cooling stage was then validated by the spatially-resolved X-ray diffraction measurements of residual stresses in the clad layer. The experimentally validated finite element model was then applied to investigate the effect of laser power, material properties (Young's modulus, yield strength, and coefficient of thermal expansion), and the number of clad tracks on the residual stresses in the clad layer. It was found from the numerical simulations that the magnitude of residual stress components increases with increasing Young's modulus, yield strength, and coefficient of thermal expansion of the clad material. A higher temperature gradient located in the molten pool induced a higher concentration of thermal stresses and eventually a higher residual stress level in the clad samples. Higher tensile residual stress was generated with an increasing number of clad tracks although the residual stress in the existing clad tracks was relaxed somewhat during the subsequent cladding process of new tracks. Specifically, high tensile transverse residual stress formed in the overlapped region and on both sides of the clad layer, whereas higher longitudinal and von Mises equivalent residual stresses were developed in the last clad track. The finite element analysis results presented in this study may provide useful guidance for reducing the residual stresses in clad layers by optimizing the multi-track laser cladding processing parameters.

Numerical Simulation to Study the Effect of Repair Width on Residual Stresses of a Stainless Steel Clad Plate

Influence of repair length on residual stress in the repair weld of a clad plate

Finite Element Analysis of the Effect of Welding Heat Input and Layer Number on Residual Stress in Repair Welds for a Stainless Steel Clad Plate

Effects of Clad and Base Metal Thickness on Residual Stress in the Repair Weld of A Stainless Steel Clad Plate

A Study of Residual Stress in the Repair Weld of Stainless Steel Clad Plate by Neutron Diffraction Measurement and Finite Element Method

Experimental to study the effect of multiple weld-repairs on microstructure, hardness and residual stress for a stainless steel clad plate

Neutron Diffraction Measurement and Numerical Simulation to Study the Effect of Repair Depth on Residual Stress in 316L Stainless Steel Repair Weld

Residual stresses evolution during strip clad welding, post welding heat treatment and repair welding for a large pressure vessel

3D Numerical Simulation of Brazed Residual Stress in Stainless Steel Plate-Fin Structure

Numerical analysis on effect of plate width on stress distribution in weldbonded joints

Effect of Repeated Weld Repairs on Microstructure and Mechanical Properties of Heat-Affected Zone in CA6NM Stainless Steel

Numerical simulation of distortion-induced fatigue crack growth using extended finite element method

Numerical Simulation and Experimental Analysis of Thermal Conduction and Stress in Laser Cladding Repair of Thin-Walled Parts

Study of Residual Stress Evolution in SUS304/Q235 Bimetallic Clad Plate Butt-Welded Joints Considering Welding Sequence

Numerical Analysis of Residual Stress for Copper Base Brazed Stainless Steel Plate-Fin Structure

A 3D finite element analysis of thermally induced residual stress distribution in stainless steel coatings on a mild steel by laser hot wire cladding

Residual Stress Within Stainless-Clad Bimetallic Steel Welded Box Sections

Experimental and Numerical Simulation to Study the Reduction of Welding Residual Stress by Ultrasonic Impact Treatment

Residual Stresses in Circular Steel Tubular Columns Repaired by Laser-Cladding Additive Manufacturing

Finite element simulation of multi-layer repair welding and experimental investigation of the residual stress fields in steel welded components

Integrated modeling for residual stress and failure behavior in welded Grade 91 steel cladded with nickel alloy