Abstract:Abstract. In this paper, a synthesis method is proposed for the 5-point-contact four-bar linkage that approximates a straight line with given angle parameters. The given parameters were the angles and the location of the Ball point. Synthesis equations were derived for a general Ball–Burmester point case, the Ball–Burmester point at an inflection pole, and the Ball point that coincided with two Burmester points, resulting in three respective groups of bar linkages. Next, taking Ball–Burmester point as the coupler point, two out of the three bar-linkage combinations were used to generate three four-bar mechanisms that shared the same portion of a rectilinear trajectory. Computation examples were presented, and nine cognate straight-line mechanisms were obtained based on the Roberts-Chebyshev theory. Considering that the given parameters were angles which was arbitrarily chosen, with the other two serving as the horizontal and vertical axes, so the solution region graphs of the solutions for three mechanism configurations were plotted. Based on these graphs, the distribution of the mechanism attributes was obtained with high efficiency. By imposing constraints, the optimum mechanism solution was straightforwardly identified by the designers. For the angular parameters prescribed in this paper, the solutions for three straight-line mechanism configurations were obtained, along with nine cognate straight-line mechanisms that shared the same portion of the rectilinear trajectory. All the fixed pivot installation locations and motion performances differed, thus providing multiple solutions to the trajectory of the synthesis of mechanisms.

Study on a New Computer Path Synthesis Method of a Four-Bar Linkage

Study on a New Synthesis Methodfor Four-bar Straight-line Guidance Mechanism

Synthesis of the four-bar linkage as path generation by choosing the shape of the connecting rod

An Improved Fourier-Based Method for Path Generation of Planar Four-Bar Linkages without Prescribed Timing

A fully analytical method for coupler-curve synthesis of planar four-bar linkages

Study of the Path Synthesis of a Planar Two-DOF Five-bar Mechanism

Synthesis Theory and Optimum Design of Four-bar Linkage with Given Angle Parameters

The Synthesis of Planar Four-Bar Linkage for Mixed Motion and Function Generation

On the Extension of a Fourier Descriptor Based Method for Planar Four-Bar Linkage Synthesis for Generation of Open and Closed Paths

Research on Web-Based Optimization for Path Generation Synthesis of Planar Four-Bar Linkage

Computer-Aided Synthesis of Linkage-Type Straight-Line and Dwell Mechanisms

Path Synthesis of a Spherical Five-Bar Mechanism Based on a Numerical Atlas Method

Appropriate synthesis of the four-bar linkage

Comprehensive approach for the dimensional synthesis of a four-bar linkage based on path assessment and reformulating the error function

Study on Rigid-Body Guidance Synthesis of Planar Linkage

Path synthesis of a four-bar linkage using a teaching-learning-based optimization algorithm

Design Framework for Motion Generation of Planar Four-Bar Linkage Considering Clearance Joints and Dynamics Performance

Path synthesis of planar four-bar linkages for closed and open curves using elliptical Fourier descriptors

Study on numerical comparison method for planar Six-bar dwell mechanism synthesis

Optimal Synthesis of Four-Bar Linkage Path Generation through Evolutionary Computation with a Novel Constraint Handling Technique

Center-driven planar closed-loop mechanisms based on an angulated four-bar linkage