Abstract:Rare-earth ion (Eu3+, Tb3+, Ce3+)- doped LaPO4 nanocrystalline thin films and their patterning were fabricated by a Pechini sol-gel process combined with soft lithography on silicon and silica glass substrates. X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), atomic force microscopy (AFM), scanning electron microcopy (SEM), optical microscopy, absorption and photoluminescence (PL) spectra as well as lifetimes were used to characterize the resulting films. The results of XRD indicate that the films begin to crystallize at 700 degreesC and the crystallinity increases with increasing annealing temperature. The morphology of the thin film depends on the annealing temperature and the number of coating layers. The 1000 degreesC annealed single layer film is transparent to the naked eye, uniform and crack-free with a thickness of about 200 nm and an average grain size of 100 nm. Patterned thin films with different strip widths ( 5 - 50 mm) were obtained by micromolding in capillaries ( soft lithography). The doped rare earth ions show their characteristic emission in the nanocrystalline LaPO4 films, i.e., Eu3+ D-5(0)-F-7(J) (J = 1, 2, 3, 4), Tb3+ D-5(3,4) - F-7(J) ( J = 6, 5, 4, 3, 2) and Ce3+ 5d-4f transition emissions, respectively. Both the lifetimes and the PL intensities of Eu3+ and Tb3+ increase with increasing annealing temperature, and the optimum concentrations for them were determined to be 5 mol% and 16 mol% of La3+ in LaPO4 thin films, respectively. An energy transfer phenomenon from Ce3+ to Tb3+ has been observed in LaPO4 nanocrystalline thin films, and the energy transfer efficiency depends on the doping concentration of Tb3+ if the concentration of Ce3+ is fixed.

LnPO 4 : RE 3+ (la = La, Gd; RE = Eu, Tb) Nanocrystals: Solvo-Thermal Synthesis, Microstructure and Photoluminescence

Reproducible Solvent–Thermal Synthesis, Controlled Microstructure, and Photoluminescence of REPO4:Eu3+, Tb3+ (RE=Y, La, and Gd) Nanophosphors

LaPO4:Eu3+, LaPO4:Ce3+, and LaPO4:Ce3+,Tb3+ nanocrystals: Oleic acid assisted solvothermal synthesis, characterization, and luminescent properties

Generalized Synthesis of NaLn(MoO4)2 Nano/microcrystals (ln = La–Lu and Y): the Effects of Lanthanide Contraction, Structure, and Down-/Up-conversion Luminescence

Sol–gel Synthesis and Photoluminescent Properties of LaPO4:A (A = Eu3+, Ce3+, Tb3+) Nanocrystalline Thin Films

Synthesis and Photoluminescence Characterization of Ellipsoidal Lanthanide Orthophosphate Nanoparticles

Controlled chemical co-precipitation and solid phase synthesis, microstructure and photoluminescence of La3PO7:Eu3+ phosphors

Systematic Synthesis of Lanthanide Phosphate Nanocrystals

Synthesis and Luminescent Properties of Novel RENbO4:Ln3+ (re=y,gd,lu; Ln=Eu,Tb) Micro-Crystalline Phosphors

Re2(Mo4)(3):Ln(3+) (re = Y, La, Gd, Lu; M = W, Mo; Ln = Eu, Sm, Dy) Microcrystals: Controlled Synthesis, Microstructure and Tunable Luminescence

Facile Composite Synthesis and Photoluminescence of NaGd(MoO4)2: Ln3+(Ln = Eu, Tb) Submicrometer Phosphors

Sol-gel composing hybrid precursors to synthesize REBO3: Ln 3+ (RE = Y, Gd; Ln = Eu, Tb) submicrometer phosphors

Photoluminescence of Rare Earth Phosphors Na0.5Gd0.5WO4: RE3+ and Na0.5Gd0.5(Mo0.75W0.25)O4: RE3+ (re=eu, Sm, Dy)

Synthesis and Luminescent Properties of LaPO 4 :Eu3+nanocrystal with Ultrasonic Method

Correlation of Photoluminescence of (la, Ln) PO4:Eu3+ (ln = Gd and Y) Phosphors with Their Crystal Structures

Controlled Synthesis and Luminescence Properties of LaPO4:Eu Phosphors

Controllable Synthesis and Luminescent Properties of Rare Earth Doped Gd2(MoO4)3 Nanoplates

Synthesis And Luminescent Properties Of Lapo4:Eu3+ Nanocrystal With Ultrasonic Method

Luminescent Properties of LaPO4: Eu Nanoparticles and Nanowires.

Vibrational and Luminescent Properties of LaPO4:Eu3+ with Different Preparation Conditions

Effect of Compositions, Crystal Structures and Morphologies on Photo-Luminescent Property of LaPO4:Gd3+