Abstract:The utilization of nanofluid is found to considerably enhance the heat transfer performance. The present study fabricated a hybrid Al2O3-CuO/water nanofluid and investigated its turbulent thermal and flow performance in a circular tube. Experimentally, the heat transfer coefficient and pressure drop of hybrid nanofluids with mass concentrations ranging from 0.5% to 3% were measured under different Reynolds number. The effect of selection of thermophysical property models on performance was also concerned. Numerically, Computational Fluid Dynamics (CFD) simulations based on Discrete Phase Model (DPM), mixture and Eulerian multiphase model were conducted and compared. Results reveal a relative enhancement of 2%-35% in heat transfer performance of hybrid nanofluid under various flow rates. In addition, the enhancement tends to increase with the increment of nanofluid concentration and decrement of flow rate. The pressure drop also shows different degrees of enlargement up to 12%. Different thermophysical property models lead to different Nusselt and Reynolds numbers, which results to various levels of deviations among different models. Generally, the thermal and flow characteristics adopting different models have similar trend but different magnitudes. By selecting certain models, the thermal performance factor has a value in the range of 1.01-1.29 and shows an increment with the increase of concentration and decrease of Reynolds number. The developed CFD models show desirable prediction accuracies for experimental heat transfer coefficient but seriously underestimate the pressure drop. Specifically, the Eulerian model exhibits the smallest deviation of 8.1% with the experimental heat transfer coefficient followed by the mixture model and DPM with the derivations of 10.2% and 12.5% respectively. The present study can help to understand the heat and flow behaviour of hybrid nanofluid in heat transfer devices.

Method for predicting migrated mass of CuO nanoparticles in the boiling process of nanorefrigerant CuO-R113

Model and Numerical Simulation for Adsorption Phase Reaction and Crystallization

Numerical Modeling of Turbulent Heat Transfer of a Nanofluid at Supercritical Pressure

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Molecular Dynamics Simulations of R32/R1234yf Nanoscale Boiling on a Smooth Substrate

Analysis of the mechanism of enhanced heat transfer by nanofluids

Molecular Dynamics Simulations on Evaporation of a Suspended Binary Mixture Nanodroplet

Molecular dynamics simulations of R32/R134a boiling on nanostructured surfaces

Formation and Growth of R32/R1234yf Nanobubble on Smooth Surface: Molecular Dynamics Simulations

Experiments and modeling of boiling heat transfer of GNP nanofluids with metallic elements

A mechanistic model for nucleate boiling heat transfer performance with lubricant-refrigerant mixture

Numerical modeling and analysis of nanofluids subcooled boiling in a horizontal circular tube

Numerical Prediction for Subcooled Boiling Flow of Liquid Nitrogen in a Vertical Tube with MUSIG Model

Molecular Dynamics Simulation on Evaporation of a Suspending Difluoromethane Nanodroplet

Numerical Study of Transient Buoyancy-Driven Convective Heat Transfer of Water-Based Nanofluids in A Bottom-Heated Isosceles Triangular Enclosure

Heat Transfer Characteristics and Chf Prediction in Nanofluid Boiling

Microscopic mechanisms of particle agglomeration to enhance transport properties of nanofluids

Analyses of Bubble Dynamics in Subcooled Boiling Flow Using Euler-Lagrange Method

A Numerical Investigation of Transient Natural Convection Heat Transfer of Aqueous Nanofluids in A Horizontal Concentric Annulus

Turbulent heat transfer and flow analysis of hybrid Al2O3-CuO/water nanofluid: An experiment and CFD simulation study

Molecular dynamics simulations of nanodroplet evaporation of refrigerants