The Technique to Realize XML File Editor Based on CIM

WU Wei-xing,XU Yong-li,WANG Kang-yuan

DOI: https://doi.org/10.3969/j.issn.1001-1390.2006.09.016

2006-01-01

Abstract:According to power system model,a XML file Editor was realized based on CIM,with which these XML files can be browsed and edited in convenience,and demonstrate the multilevel realtionships among the power system resources and make users to modify system's model more easily.

What problem does this paper attempt to address?

POWER SYSTEM TOPOLOGICAL ANALYSIS SOFTWARE BASED ON CIM AND XML

Zhou Hao,Yuan Quan,Xia Xiang,Wang Kangyuan

DOI: https://doi.org/10.3969/j.issn.1000-386X.2007.01.033

2007-01-01

Abstract:In Power system,topological analysis is the basis of other advanced applications.It is constituted of three parts,including analysis of connectivity nodes,analysis of topological nodes and analysis of topological islands.Common Information Model(CIM) is accepted and adopted step by step in recent years,it adopts the XML file as bottom carrier.In this text,there is a introduction of structure,performance and traits of new generation power system topological analysis software,which can adapt the characteristic of CIM and XML,with the addition of a advanced application instance.
The Computer Simulation of Multi-modules Coupled Model of the Power System

冯华君,洪淑月

DOI: https://doi.org/10.3969/j.issn.1006-9348.2003.06.027

2003-01-01

Abstract:In the digital real-time simulation of the power system the multi-modules parallel processing technique has been extensively employed. The paper presents a coupled model between modules of the normal operation of the power system and its digital integration method. With this model and method, the digital real-time simulation of a concrete instance is realized by PentiumⅢ. The result of the simulation shows that the model is correct and the digital integral method is suitable for real-time simulation.
A Novel Xml-Based Power Resource Modeling Framework for Power System Heterogeneous Data Integrating

Can Wan,Zhaoyang Dong,Fengji Luo,Rui Wang,Yingying Chen,Ke Meng,Kit-Po Wong

DOI: https://doi.org/10.4028/www.scientific.net/amm.58-60.1476

2011-01-01

Abstract:This paper proposes a XML-based power heterogeneous data integrating framework. The tool uses XML to describe and model the objects of power system in a similar way with rational database. It helps transform the heterogeneous data belonging to different power organizations to the data with uniform format stored as XML files. The tool can enable the heterogeneous data integrating and exchanging of power system. Thus various distributed application can be developed base on this framework. The practical application proved the efficiency of proposed framework.
Export technique based on common information model(CIM) in EMS

Kangyuan Wang

DOI: https://doi.org/10.3969/j.issn.1674-3415.2006.01.016

2006-01-01

Abstract:Through analyzing the EMS of Zhejiang Electric Power Company,the paper firstly introduces the characters of this EMS,then offers the export solution based on CIM in EMS.At last,the paper discusses some crucial techniques such as how to construct the CIM model based on the splitting techniques and how to add the irregular data records in the SCADA database into the CIM model.Through CimValidator's validating,the exported XML file is in conformity with IEC-61970 completely.
Application of CIM & XML Based Combination Method of Power Network Models in Dispatching System of Beijing Electric Power Corporation

米为民,韦凌霄,钱静,刘润生,潘毅,邹跃中

2008-01-01

Abstract:According to the two-level monitoring mode in Dispatching and Communication Center of Beijing Electric Power Corporation and based on the common information model(CIM) standard in IEC 61970,a combination method for two-level power network models is proposed.Using such means as memory sharing high efficiency index technique,CIM file parser,boundary definition and internal and external network splitting,the combination efficiency of model files is improved;the model superposition in adjacent dispatching areas is solved;meanwhile,combining with scalable vector graphics(SVG) conversion technology the on-line monitoring of whole power network is realized,thus the model and picture supporting is provided for state estimation of whole power network and joint anti-accident maneuver in dispatcher training system(DTS).
Theory and Practice of Transformer Modeling Based on CIM

王珊,刘毅,郭创新,张扬,金文德

DOI: https://doi.org/10.3969/j.issn.1001-4551.2008.07.026

2008-01-01

Abstract:According to state grid SG 186 project,the background in current power information system was studied.By using UML modeling technology,a new modeling theory and method based on common information model(CIM) was proposed and applied to the actual project.Through modeling transformer asset,effectiveness and advantages were proved.The experimental results show that the analysis provides an effective modeling method in power information system for further developing the digital grid.
Import/Export Technique Based on Common Information Model (CIM) in EMS

董越,孙宏斌,吴文传,张伯明,刘崇茹

DOI: https://doi.org/10.3321/j.issn:1000-1026.2002.03.003

2002-01-01

Abstract:The standardization of the application program interface (API) of the energy management system (EMS) is described. Using real-time database as an adapter and with extended marked language (XML), a scheme is proposed for the implementation of data exchange for a commercial EMS based on common information model (CIM). This adapter converts data in two steps: semantic translation and syntax translation. The crucial technical problems of using real-time database to support the CIM have been solved, such as, the representation of the multiplicity of association and the handling of inheritance. The automatic generation of real-time database definition according to CIM based on unified model language (UML) is implemented. The CIM data in XML format can be automatically imported to and exported from a commercial EMS. The feasibility and compatibility of this method is validated through self-operation.
Intelligent Analysis and Decision Support System of Zhejiang Power Grid

陈祎,郭瑞鹏,叶琳,孙维真

DOI: https://doi.org/10.3969/j.issn.1004-3950.2012.02.004

2012-01-01

Energy Engineering

Abstract:The main functions and features of the intelligent analysis and decision support system of Zhejiang Power Grid were introduced.This system supports the import and export of BPA、CIM、PSASP、PSSE files.It separately manages the versions of power grid structure,load and output,maintenance plan,and then forms various kinds of operation modes trough mergence.After that,this system can do power flow calculation,short-circuit calculation,transient calculation,and also can analyze the security and stability of the power grid's operation through the static voltage stability analysis,calculation of the transmission interface's thermal capability,security check and so on.The details of calculation and analysis are showed by tree reports,prompts、warnings and aid strategy are given to guide the security operation of the power grid.
EXPRESS Driven XML Data Used in CAx/PDM Integration Framework

HAN Jie,LI Jiangxiong,KE Yinling,SU Caimao

DOI: https://doi.org/10.3969/j.issn.1000-3428.2005.10.076

2005-01-01

Abstract:In this paper, a new CAx/PDM integration framework based on STEP mapped XML-DTD/Schema has been addressed, which make an unanimous paradigm in production life cycle and Internet-based crossing-enterprise integration come true. And a new solution for CAx/PDM integration by means of Web service technology also has been represented. Finally, an example is illustrated to further argumentation.
CIM Lead-in Based on Java Reflection Mechanism in AEMS of Shanghai Power Grid

DENG Xianda,HE Guangyu,CHEN Ying,ZHANG Wangjun

DOI: https://doi.org/10.3321/j.issn:1000-1026.2007.18.005

2007-01-01

Abstract:To enhance the extensibility and reusability of data exchange of the common information model(CIM),a new solution for model lead-in based on the Java reflection mechanism is proposed in this paper,which is also designed for the AEMS data platform of Shanghai power grid.The proposed solution has overcome the main difficulties due to the difference of CIM versions and comprehensions of EMS manufacturers achieving remarkable interoperability.It is composed of three main parts,parsing of XML file based on CIM,verification of model observability and development of the run-time model.It can be arranged on the AMES data platform to perform data exchange with the EMS system of different manufacturers.The extensibility,reusability and efficiency of the solution are verified by test statistics.
AN INVESTIGATION ON A COMMON INFORMATION MODEL FOR ENERGY MANAGEMENT SYSTEM

刘崇茹,孙宏斌,张伯明,董越,辛耀中

DOI: https://doi.org/10.3321/j.issn:1000-1026.2003.14.010

2003-01-01

Abstract:The openness of the application program interface is badly needed in developing a new generation of energy management system (EMS). The common information model (CIM), an important part of International Standard IEC61970 series provided by IEC, can realize information sharing in the true sense of EMS application. An adapter is designed and implemented based on real-time database techniques, which can realize data exchange and transmission between original EMS databases and CIM data storage up to the CIM requirement. And a power system model meeting the CIM criteria is developed according to an IEEE 14-node standard system. This model has been adopted as a test system of national standards of dispatch automation systems of district power networks. It will also be submitted to IEC technical committee 57 as a test system with independent copyright.
Multi-Regional Power Network Model Online Splicing and Merging

LI Xiaolu,HUANG Minghui,WEI Lingxiao,LIU Runsheng,ZHAO Yong,WU Haiyong,ZHOU Jieying

DOI: https://doi.org/10.3321/j.issn:1000-1026.2009.22.011

2009-01-01

Abstract:A description is made of an online multi-regional model splicing and merging method based on the CIM/XML power system models and SVG graphs and with the tie lines as modeling boundaries for the power ensured automation system. In view of the teed tie lines between regional systems, tee grouping is presented to merge the tee connections from several models and prevent frequent modification of the line information due to non-unified naming of virtual substations. As for the incremental model update, apart from updating the attributes of devices on the basis of unified naming, the connection between equipments will be updated by binding the connectivity of the operating system to that of the model to be imported.By means of the model's online splicing and merging, the power ensured automation system developed vill be capable of retrieving a power supply path for important customers from 380 V to all upper level power sources through the network topology. Thus the requirement of "the whole chain" network monitoring can be met, guaranteeing as much as possible reliable power supply to important customers.
Research on STEP Feature Model and Its Application in the Integrated Environment of CIM

杨子江,杨小虎,李善平,董金祥

DOI: https://doi.org/10.3321/j.issn:1003-9775.2001.05.011

2001-01-01

Abstract:This paper addresses the application of STEP techniques in CIM environment and explores the principles of establishing STEP feature model, realizing feature-based modeling in CAD/CAPP, implementing STEP toolkit and carrying out model mapping. Based on these approaches, a kind of “Plug and Play” technique for feature mapping and information integration is discussed. Finally, a system independent method to feature-based CAD/CAPP integration is presented.
Power Equipment Diagnosis and Management System Model Based on CIM

Lei HUANG,Kang-yuan WANG,Ji-yong LIANG

DOI: https://doi.org/10.3969/j.issn.1674-3415.2005.07.011

2005-01-01

Abstract:The IEC61968 series standard has established the basic model of power system equipments.According to the need of diagnosing and managing equipments in China,the paper models the aspects of equipment including assets, measurement,work and document. Based on the excellence of this model,the paper advances a concept of building a foundation in power system for common information sharing and storing.
CIM data application integrated enhancement and validation method research

MA Ping-chuan,HUANG Shao-wei,CHEN Ying,HE Guang-yu

DOI: https://doi.org/10.3969/j.issn.1673-9140.2013.03.007

2013-01-01

Abstract:As the essential part of IEC-61970standard,common information model(CIM)is widely used as the interactive tools for grid status information shared by various categories of power applications.However in the actual project,CIM-based applications face the problems of the slow data analysis and the poor data quality,which has a direct impact on the calculation and control of power systems.The optimization of the CIM data extraction process and the CIM data quality upgrade approach based on expert library is proposed in this paper.In the meanwhile,a new idea of CIM model validation and data quality assessment is constructed based on combining the traditional CIM rule-based calibration method and state estimation.Then the test results on the actual domestic area grids have proved the effectiveness of the proposed methods.
IEC 61970 Standard Based Modeling Scheme of Wind Power,Photovoltaic Power,Energy Storage

XIA Tianlei,WANG Linqing,JIANG Quanyuan

DOI: https://doi.org/10.7500/AEPS20141130004

2015-01-01

Abstract:By defining the basic package set of the common information model(CIM),the IEC 61 970 series standards provide a logical view as well as data structure for the information in energy management systems.Based on the studies of CIM in IEC 61 970 series standards and complying with CIM semantics and extension criterion,this paper extends the original CIM by developing CIM extension model of wind power generation,photovoltaic power generation and energy storage system for applying to the design of grid energy management systems containing wind-photovoltaic-energy storage to provide a unified interface for further development of advanced energy management system application.
Application of CIM in Modeling Relay Protection Equipment

彭明伟,刘毅,郭创新

DOI: https://doi.org/10.3969/j.issn.1001-4551.2009.05.029

2009-01-01

Abstract:According to state grid SG 186 project,the background in current power information system was studied.By using UML modeling technology,a new modeling theory and method based on common information model(CIM) was proposed and applied to the actual project.The microprocessor-based relaying protection equipment was modeled.At last,an example of model and its application in the database was proposed.The experimental results show that the analysis provides an effective modeling method in power information system for further developing the digital grid.
Design of a Power System Information Platform Based on CIM

白日昶,李颖,帅玲玲,陈颖

2011-01-01

Abstract:As the main obstacle to application integration is inadequate interoperability of itself, both the upgrade of common information model （CIM） version and different descriptive languages will result in the loss of interoperability. The interoperability levels of CIM data are analyzed, and based on metadata interoperability, an adaptive decoding and translation method applicable to any model description schema or text descriptive language is proposed. Furthermore, a SMARTCIM platform that can provide unified data I/O interface for multi-data sources and multi-application systems is designed, which is used as a decoupling and buffering platform between data and applications. The practicability and efficiency of the SMARTCIM are proved in the project of the integrated data platform in the Central Control Center of Jiangxi Extra-High Voltage Sub company.
THE EXTENSION OF THE COMMON INFORMATION MODEL TO ANALYSIS AND CONTROL OF AC/DC POWER SYSTEM

刘崇茹,张伯明,孙宏斌,辛耀中

DOI: https://doi.org/10.3321/j.issn:1000-1026.2004.20.011

2004-01-01

Abstract:The common information model (CIM) is extended to analyze and control the AC/DC power system load flow. The CIM based on the data interface required by AC/DC power flow calculation is defined and the framework of AC/DC power flow is designed. Based on the semantics prescribed by the extended CIM, a program of AC/DC power flow is presented. An advanced application software with the CIM-based AC/DC load flow embedded is developed. The application program is functionally independent and at the same time obeys the CIM standard in the data interface. It is expected that it is helpful for implementing the plug-in application for AC/DC energy management system (EMS).
Applications And Extension Of Cim Standard In Chinese Electrical Power Control Centers

Hongbin Sun,Boming Zhang,Wenchuan Wu

DOI: https://doi.org/10.1109/PES.2009.5275485

2009-01-01

Abstract:In order to meet the requirements of some important field site applications, IEC61970 Common Information Model (CIM) standard has been extended in China, such as extensions of external network equivalent model and HVDC model. The extended CIM has been applied in many Chinese Electrical Power Control Centers (EPCCs) successfully. As an example of integration of applications developed by different vendors in one EPCC, the CIM standard was adopted to exchange model between the system-wide automatic voltage control system and the existing Energy Management System in Jiangsu Provincial EPCC. As an example of integration of multiple control centers, an CIM standard based hierarchical network remodeling system is designed and implemented to improve real-time external modeling in China Southern Grid(CSG). In addition, an example of CIM/CIS based open data service system implemeted in Jinhua Subtransmission control center was introduced to show the field-site application of CIS based data access service. The efficiency of the CIM based field site applications is validated.

The Technique to Realize XML File Editor Based on CIM

POWER SYSTEM TOPOLOGICAL ANALYSIS SOFTWARE BASED ON CIM AND XML

The Computer Simulation of Multi-modules Coupled Model of the Power System

A Novel Xml-Based Power Resource Modeling Framework for Power System Heterogeneous Data Integrating

Export technique based on common information model(CIM) in EMS

Application of CIM & XML Based Combination Method of Power Network Models in Dispatching System of Beijing Electric Power Corporation

Theory and Practice of Transformer Modeling Based on CIM

Import/Export Technique Based on Common Information Model (CIM) in EMS

Intelligent Analysis and Decision Support System of Zhejiang Power Grid

EXPRESS Driven XML Data Used in CAx/PDM Integration Framework

CIM Lead-in Based on Java Reflection Mechanism in AEMS of Shanghai Power Grid

AN INVESTIGATION ON A COMMON INFORMATION MODEL FOR ENERGY MANAGEMENT SYSTEM

Multi-Regional Power Network Model Online Splicing and Merging

Research on STEP Feature Model and Its Application in the Integrated Environment of CIM

Power Equipment Diagnosis and Management System Model Based on CIM

CIM data application integrated enhancement and validation method research

IEC 61970 Standard Based Modeling Scheme of Wind Power,Photovoltaic Power,Energy Storage

Application of CIM in Modeling Relay Protection Equipment

Design of a Power System Information Platform Based on CIM

THE EXTENSION OF THE COMMON INFORMATION MODEL TO ANALYSIS AND CONTROL OF AC/DC POWER SYSTEM

Applications And Extension Of Cim Standard In Chinese Electrical Power Control Centers