Abstract:The global navigation satellite system (GNSS) (GPS, Galileo, GLONASS, BeiDou (COMPASS)) would provide more available civil signals and more accurate PVT estimation. On one hand, more satellites in view would enable the user receiver to select the satellites with better geometric distribution to get a better Dilution of Precision (DOP). On the other hand, some GNSS civil signals adopted Binary Offset Carrier (BOC) modulation which could provide the advantages of better code tracking performance, multipath effect reduction, and narrow band interference rejection. However, there are two main problems in the design and implementation of multi-system GNSS receiver. Firstly, some signals adopt BOC modulations and this would arouse the ambiguity problem in signal acquisition and tracking of BOC modulated signal. Secondly, multi-system GNSS receiver would consume more hardware resources than conventional GPS receiver.In this paper we tried to explore solutions to the two problems. To deal with the ambiguity problem, we implemented the GRASS technique in our receiver which could effectively deal with the sine-phased BOC(kn,n) signal's ambiguity problem. We devised an FFT based acquisition method to effectively calculate the test criterion of the GRASS technique employs. In the tracking progress, we devised a PCF (Pseudo Correlation Function) based detection technique to test false lock and compared its performance with Bump-Jump technique.To reduce the hardware consumption, we devised a universal configurable tracking channel module with which the receiver could track satellite signals of different systems. This channel architecture could reduce the channel numbers used in the multi-system GNSS receiver. We also employed some other methods to reduce hardware resources. We implemented a multi-system GNSS receiver on an Altera development board which could handle GPS L1 C/ A, GALILEO E1 OS and BeiDou B1 signals.

Design ofGPS-based CIR Satellite Positioning Module

Variable Rate Irrigation Control System Integrated with GPS and GIS

Design and Implementation of Micro-Satellite Receiver Using CORDIC Algorithm

Design and Implementation of Intelligent Agricultural Product Logistics Vehicle Monitoring Terminal Based on Gps/Gprs

The Design And Implement Of Gps Software Simulation Platform

Design of Taxi Meter and Monitoring System Based on GPS-GPRS

Gps Real Time Vehicle Alarm Monitoring System Base On Gprs/Csd Using The Embedded System

Implementation and Performance of a Deeply-Coupled GNSS Receiver with Low-Cost MEMS Inertial Sensors for Vehicle Urban Navigation

Design of General Ground Integrated Test Intermediate Frequency Receiver for Satellite Transmission System (in Chinese)

Vehicle GPS Real Time Monitoring Communication System Base on GPRS/CSD

Architecture And Implementation Of Gnss Software Receiver For Compatibility And Interoperability Research

Development and Evaluation of GPS L2C Software Receiver Baseband Signal Processing Module

Design and implementation of conveyance monitor based on GPS and GSM

Implement and Experiment of GNSS Receiver Software

Application research of RFID technology in bus dispatch system

Vehicular Localization Based on CSI-Fingerprint and Vector Match

Three-satellite passive position system design based on FPGA+DSP

Application of Integrated Navigation System to Vehicle-Carried Mobile Satellite Communication

Implementation of A Gnss Receiver with an Unambiguous Acquisition and Tracking Technique

A GSM 900M Road Tester Design with USRP and GNU Radio