Abstract:Heat transfer enhancement is of great importance for energy efficiency improvement. The utilization of spirally corrugated tubes is one of the efficient ways to strengthen heat transfer. In this article, based on a validated numerical model, the effects of geometric parameters of a six-start spirally corrugated tube, including the pitch p and the corrugation depth e, on the shell side heat transfer and flow resistance performance are numerically investigated, in high Reynolds number conditions ranging from 10,000 to 60,000. The shell side secondary flow velocity distribution, longitudinal vortex distribution, and temperature distribution of a six-start spirally corrugated tube are presented, respectively. In addition, the heat transfer and flow resistance characteristics are evaluated by comparing the Nusselt number and the flow resistance coefficient with these of smooth tubes. Results show that the utilization of six-start spirally corrugated tubes can enhance the heat transfer performance at the expense of an increase of the flow resistance. However, with the same geometric parameters, the Nusselt number increases and the flow resistance coefficient decreases as Reynolds number increases. With the pitch increasing, the Nusselt number and the flow resistance coefficient decrease at a fixed Reynolds number. In contrast, as the corrugation depth increasing, the Nusselt number changes irregularly, and the flow resistance coefficient increases. Finally, correlations for the shell side Nusselt number and flow resistance coefficient of the six-start spirally corrugated tube are established. This work is of significance for engineers and scientists focusing on the heat transfer and the flow resistance characteristics of spirally corrugated tubes and their applications.

Correlations of the Cycle-Averaged Nusselt Number in A Periodically Reversing Pipe-Flow

Simulation And Analysis On Heat Transfer In Laminar Oscillatory Flow In-Tube

Observation of Heat Transfer in Oscillating Flow Within A Circular Channel

Oscillatory Heat Transfer in a Pipe Subjected to a Laminar Reciprocating Flow

A Numerical Solution of Laminar Forced Convection in a Heated Pipe Subjected to a Reciprocating Flow

Direct Numerical Simulation Of Turbulent Heat Transfer In An Axially Rotating Pipe Flow - Reynolds Shear Stress And Scalar Flux Budgets

Direct numerical simulation of turbulent heat transfer in an axially rotating pipe flow

A geometric study on shell side heat transfer and flow resistance of a six-start spirally corrugated tube

Experimental Studies on the Onset of Turbulence and Frictional Losses in an Oscillatory Turbulent Pipe Flow

Numerical Analysis on Unsteady Intermittent Flow in a Rotating Curved Pipe

Friction Factor and Nusselt Number Correlations for Forced Convection in Helical Tubes

Field Synergy Analysis of Six Starts Spiral Corrugated Tube under High Reynolds Number

Effects of Geometrical Parameters on Heat Transfer Enhancement in V-Spirally Corrugated Tube

Convective Heat Transfer Coefficient for a Rod-Like Particle in a Uniform Flow

Fluid Flow and Mixed Convection Heat Transfer in a Rotating Curved Pipe

Numerical Investigation of the Thermohydraulic Performance of Double-Wave Cross-Corrugated Passages

A Numerical Study of Laminar Reciprocating Flow in a Pipe of Finite Length

Numerical Study On Low Reynolds Number Heat Transfer In Alternating Elliptical Axis Tube

Investigation of Turbulent Flow and Heat Transfer in Periodic Wavy Channel of Internally Finned Tube with Blocked Core Tube

Numerical study on flow and heat transfer characteristics of low pressure gas in slip flow regime

Experimental studies on local and average heat transfer characteristics in helical pipes with single phase flow