Abstract:The surface chemical modified aluminum hypophosphite (AHP) defined as MAHP was successful prepared through P–H bonds on AHP surface reacted with the aldehyde groups in hexa-(4-aldehyde-phenoxy)-cyclotriphosphazene made in our lab. The wettability of the flame retardants was evaluated by water contact angle tests, and the water contact angle of the prepared MAHP dramatically increased from 0° for AHP to 145°, which indicated the surface modification made the superhydrophilic AHP into superior hydrophobic MAHP. The prepared MAHP and AHP, respectively, incorporated into polyamide 6 (PA6) matrix to prepare flame retardant PA6 composites and the fire retardancy and thermal degradation behavior of flame retardant PA6 composites were investigated by limiting oxygen index, vertical burning test (UL-94), cone calorimeter, and thermogravimetric analysis tests. The morphologies and chemical compositions of the char residues for PA6 composites were investigated by scanning electron microscopy and X-ray photoelectron spectroscopy, respectively. The water resistant properties of flame retardant PA6 composites were evaluated by putting the samples into distilled water at 70°C for 168 hr, and the mechanical properties for flame retardant PA6 composites were investigated by the tensile, flexural, and Izod impact strength tests. The results demonstrated that the PA6/MAHP composites successfully passed UL-94 V-0 flammability rating, and the limiting oxygen index value was 27.6% when the loading amount of MAHP was 21 wt%. However, there is no rating in vertical burning tests for PA6/AHP composite with the same amount of AHP, which indicated the surface modification of AHP enhanced the flame retardancy efficiency for PA6 composites. The morphological structures and analysis of X-ray photoelectron spectroscopy of char residues revealed that the surface modification of AHP benefited to the formation of a sufficient, flame retardant elements rich, more compact and homogeneous char layer on the materials surface during combustion, which prevented the heat transmission and diffusion, limit the production of combustible gases, inhibit the emission of smoke and then led to the reduction of the heat release rate and smoke produce rate. The mechanical properties results revealed that the surface modification of AHP enhanced the mechanical properties, especially the Izod impact strength comparing with that of PA6/AHP composites with the same amount of flame retardant. After water resistance tests, the PA6/MAHP composites remained superior flame retardancy and presented continuous and compact char layer after cone calorimeter tests; however, the fire retardancy for PA6/AHP composite obviously decreased, and the char layer was discontinuous with big hole caused by the extraction of AHP by water during water resistance tests. Copyright © 2017 John Wiley & Sons, Ltd.

Enhancement of A Hyperbranched Charring and Foaming Agent on Flame Retardancy of Polyamide 6

Flame Retardation and Thermal Degradation of Intumescent Flame‐retarded Polypropylene Composites Containing Spirophosphoryldicyandiamide and Ammonium Polyphosphate

Synergistic Effect Between a Hyperbranched Charring Agent and Ammonium Polyphosphate on the Intumescent Flame Retardance of Acrylonitrile-Butadiene-styrene Polymer

PROMOTION EFFECT OF A HYPERBRANCHED POLYPHOSPHATE ESTER FLAME RETARDANT ON CHAR FORMATION OF POLYAMIDE 6

Synergistic effect between a novel hyperbranched charring agent and ammonium polyphosphate on the flame retardant and anti-dripping properties of polylactide

Using PA6 As a Charring Agent in Intumescent Polypropylene Formulations Based on Carboxylated Polypropylene Compatibilizer and Nano‐montmorillonite Synergistic Agent

Effect of surface chemical modification for aluminum hypophosphite with hexa‐(4‐aldehyde‐phenoxy)‐cyclotriphosphazene on the fire retardancy, water resistance, and thermal properties for polyamide 6

One-pot Synthesis of a Novel S-Triazine-based Hyperbranched Charring Foaming Agent and Its Enhancement on Flame Retardancy and Water Resistance of Polypropylene

Synthesis of a Novel Hyperbranched and Phosphorus‐containing Charring‐foaming Agent and Its Application in Polypropylene

Flame retardancy and mechanical properties of polyamide 6 modified by multiple reactions with furan-phosphamide

The Effect of Hbn on the Flame Retardancy and Thermal Stability of P-N Flame Retardant PA6

Synergistic Effect Between Aluminum Hypophosphite and Alkyl-Substituted Phosphinate in Flame-Retarded Polyamide 6

Flame Inhibition and Charring Effect of Aromatic Polyimide and Aluminum Diethylphosphinate in Polyamide 6

Synergistic flame‐retardancy of lamellar cerium phenylphosphonate and aluminum diethylphosphinate towards suppressing "candlewick effect" of polyamide 6/carbon fiber composites

The Investigation of Intumescent Flame‐retardant Polypropylene Using a New Macromolecular Charring Agent Polyamide 11

Aluminum Hypophosphite Versus Alkyl-Substituted Phosphinate in Polyamide 6: Flame Retardance, Thermal Degradation, and Pyrolysis Behavior

Polymer-type flame retardants based on a DOPO derivative for improving the flame retardancy of polyamide 6: Preparation, properties and flame retardancy mode of action

A Triazine-Based Hyperbranched Char-Forming Agent for Efficient Intumescent Flame Retardant Poly(lactic Acid) Composites

A key role of a bio‐based charring‐coupling agent in flame retardant and anti‐dripping performance of polyamide 6/aluminum diethylphosphinate

A novel charring agent containing caged bicyclic phosphate and its application in intumescent flame retardant polypropylene systems

Thermal Stabilities and Flame Retardancy of Polyamide 66 Prepared by In Situ Loading of Amino-Functionalized Polyphosphazene Microspheres