DNA-Directed Assembly of Single-Wall Carbon Nanotubes

Yi Chen,Haipeng Liu,Tao Ye,Junghwa Kim,Chengde Mao

DOI: https://doi.org/10.1021/ja072838t

IF: 15

2007-01-01

Journal of the American Chemical Society

Abstract:DNA hybridization was used to reversibly aggregate single-wall carbon nanotubes (SWNTs) and prepare heteroaggregates of SWNTs and gold nanoparticles (AuNPs).

What problem does this paper attempt to address?

Carbon Nanotube DNA Sensor and Sensing Mechanism.

Xiaowu Tang,Sarunya Bansaruntip,Nozomi Nakayama,Erhan Yenilmez,Ying-Lan Chang,Qian Wang

DOI: https://doi.org/10.1021/nl060613v

IF: 10.8

2006-01-01

Nano Letters

Abstract:We report the fabrication of single-walled carbon nanotube (SWNT) DNA sensors and the sensing mechanism. The simple and generic protocol for label-free detection of DNA hybridization is demonstrated with random sequence 15mer and 30mer oligonucleotides. DNA hybridization on gold electrodes, instead of on SWNT sidewalls, is mainly responsible for the acute electrical conductance change due to the modulation of energy level alignment between SWNT and gold contact. This work provides concrete experimental evidence on the effect of SWNT-DNA binding on DNA functionality, which will help to pave the way for future designing of SWNT biocomplexes for applications in biotechnology in general and also DNA-assisted nanotube manipulation techniques.
DNA‐Wrapped Single Walled Carbon Nanotubes As Rigid Templates for Assembling Linear Gold Nanoparticle Arrays

Xiaogang Han,Yulin Li,Zhaoxiang Deng

DOI: https://doi.org/10.1002/adma.200602861

IF: 29.4

2007-01-01

Advanced Materials

Abstract:Nanotube templates assembly: Water-soluble conjugates between gold nanoparticles and DNA-wrapped single-walled carbon nanotubes (SWNTs), as shown in the figure, are constructed based on a self-assembly strategy that does not require any chemical modifications to the sidewalls of the SWNTs, which minimizes the possibility of changes to their structure and properties. The success of assembling Au nanoparticles (AuNPs) onto SWNTs paves a way for further decoration of AuNPs on SWNTs to achieve multifunctionalities.
DNA-directed Self-Assembling of Carbon Nanotubes.

SN Li,PG He,JH Dong,ZX Guo,LM Dai

DOI: https://doi.org/10.1021/ja0446045

IF: 15

2004-01-01

Journal of the American Chemical Society

Abstract:Multicomponent structures were constructed by DNA-directed self-assembling of multiple carbon nanotubes and gold nanoparticles. The work presented here represents an important advance in constructing many multicomponent nanotube structures for multifunctional material and device applications.
DNA origami templated self-assembly of discrete length single wall carbon nanotubes.

Zhao Zhao,Yan Liu,Hao Yan

DOI: https://doi.org/10.1039/c2ob26942b

2013-01-28

Abstract:Constructing intricate geometric arrangements of components is one of the central challenges of nanotechnology. Here we report a convenient, versatile method to organize discrete length single-walled carbon nanotubes (SWNT) into complex geometries using 2D DNA origami structures. First, a size exclusion HPLC purification protocol was used to isolate uniform length, SWNTs labelled with single stranded DNA (ssDNA). The nanotube-bound ssDNAs are composed of two domains: a SWNT binding domain and a linker binding domain. Although initially bound to the SWNTs, the linker domain is displaced from the surface by the addition of an external ssDNA linker strand. One portion of the linker strand is designed to form a double helix with the linker binding domain, compelling the DNA to project away from the SWNT surface. The remainder of the linker strand contains an ssDNA origami recognition sequence available for hybridization to a DNA origami nanostructure. Two different 2D DNA origami structures, a triangle and a rectangle, were used to organize the nanotubes. Several arrangements of nanotubes were constructed, with defined tube lengths and inter-tube angles. The uniform tube lengths and positional precision that this method affords may have applications in electronic device fabrication.

Medicine
Self-assembled Branched Nanostructures of Single-Walled Carbon Nanotubes with DNA As Linkers

YH Lu,XY Yang,YF Ma,F Du,ZF Liu,YS Chen

DOI: https://doi.org/10.1016/j.cplett.2005.11.116

IF: 2.719

2006-01-01

Chemical Physics Letters

Abstract:Self-assembly of DNA functionalized single-walled carbon nanotubes is studied and atomic force microscopy images show that the highly branched structures were formed for the DNA functionalized SWNTs. The formation of the branched structures can be explained by the hybridization of DNA attached to the ends and sides of SWNTs based on the DNA complementary sequence-specific pairing interactions. Statistical analysis shows that the interconnected degree of self-assembled SWNTs via DNA hybridization is seven times more than that of single strand DNA functionalized SWNTs, which can only have the non-complementary interaction.
Proton-fueled DNA-duplex-based stimuli-responsive reversible assembly of single-walled carbon nanotubes.

Chao Zhao,Konggang Qu,Jinsong Ren,Xiaogang Qu

DOI: https://doi.org/10.1002/chem.201100202

2011-01-01

Chemistry - A European Journal

Abstract:Single-walled carbon nanotubes (SWNTs) have received much attention in nanotechnology because of their potential applications in molecular electronics, field-emission devices, biomedical engineering, and biosensors. Carbon nanotubes as gene and drug delivery vectors or as "building blocks" in nano-/microelectronic devices has been successfully explored. However, since SWNTs lack chemical recognition, SWNT-based electronic devices and sensors are strictly related to the development of a bottom-up self-assembly technique. Here we present an example of using DNA duplex-based protons (H+) as a fuel to control reversible assembly of SWNTs without generation of waste duplex products that poison DNA-based systems.
Triplex inducer-directed self-assembly of single-walled carbon nanotubes: a triplex DNA-based approach for controlled manipulation of nanostructures.

Chao Zhao,Konggang Qu,Can Xu,Jinsong Ren,Xiaogang Qu

DOI: https://doi.org/10.1093/nar/gkq1347

IF: 14.9

2011-01-01

Nucleic Acids Research

Abstract:As a promising strategy for artificially control of gene expression, reversible assembly of nanomaterials and DNA nanomachine, DNA triplex formation has received much attention. Carbon nanotubes as gene and drug delivery vector or as 'building blocks' in nano/microelectronic devices have been successfully explored. Therefore, studies on triplex DNA-based carbon nanotube hybrid materials are important for development of smart nanomaterials and for gene therapy. In this report, a small molecule directed single-walled carbon nanotubes (SWNTs) self-assembly assay has been developed by disproportionation of SWNTs-dT(22)circle dot dA(22) duplex into triplex dT(22)circle dot dA(22)circle dot dT(22) and dA(22) by a triplex formation inducer, coralyne. This has been studied by circular dichroism, light scattering (LS) spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), electrophoretic mobility shift assay and supported by using DNA random sequence. In contrast, SWNTs do not aggregate under the same experimental conditions when the small molecules used can not induce dT(22)circle dot dA(22)circle dot dT(22) triplex formation. Therefore, this novel small molecule-directed SWNTs self-assembly assay has also been used for screening of triplex inducers in our studies.
Organizing Single-Walled Carbon Nanotubes on Gold Using a Wet Chemical Self-Assembling Technique

Zhongfan Liu,Ziyong Shen,Tao Zhu,Shifeng Hou,Lizhen Ying,Zujin Shi,Zhennan Gu

DOI: https://doi.org/10.1021/la9914110

IF: 3.9

2000-01-01

Langmuir

Abstract:We provide a wet chemical approach for organizing randomly tangled single-walled carbon nanotubes (SWCNTs) on gold surfaces. The as-grown nanotubes were first chemically cut into short pipes and thiol-derivatized at the open ends. The ordered assembly of SWCNTs was made by their spontaneous chemical adsorption to gold via Au-S bonds. Tapping mode atomic force microscopy (AFM) images clearly show that the nanotubes have been organized on gold, forming a self-assembled monolayer structure with a perpendicular orientation. The adsorption kinetics of the nanotubes was very slow in comparison to conventional alkanethiols. The adsorption rate varied inversely with tube length. The nanotubes tend to form bundles as the adsorption propagates, following a "nucleation adsorption mechanism". This work demonstrates that "giant" carbon nanotubes can be assembled on Au surfaces using wet chemistry similar to that exploited for "small" organic self-assembling species. We believe that assembled nanotube arrays will provide wide possibilities for applications.
Hybridization Chain Reaction Triggered Controllable One-Dimensional Assembly of Gold Nanoparticles

Jian Wang,Yuqing Du,Shaoqing Lie,Chengzhi Huang

DOI: https://doi.org/10.1007/s11426-015-0529-8

2016-01-01

Science China Chemistry

Abstract:Assembling and ordering nanomaterials into desirable patterns are considerably significant, since the properties of nanomaterials depend not only on the size and shape, but also on the spatial arrangement among the collective building blocks. In this work, the DNA self-assembly technology of hybridization chain reaction (HCR) provided a convenient method to yield long double-strand DNA (dsDNA) to install gold nanoparticles (AuNPs) into one dimensional assembly along the skeleton of dsDNA. Interestingly, the tunable length of AuNPs assemblies along dsDNA chain could be achieved by adjusting the reaction time of HCR, which is based on the formation of covalent bond between Au and the -SH group of DNA. Compared with weak light scattering of single AuNP, these AuNPs assemblies could be clearly imaged under the dark field microscopy, indicating that the light scattering was greatly improved after assembling.
Grafting Single‐Walled Carbon Nanotubes with Highly Hybridizable DNA Sequences: Potential Building Blocks for DNA‐Programmed Material Assembly

Yulin Li,Xiaogang Han,Zhaoxiang Deng

DOI: https://doi.org/10.1002/ange.200701748

2007-01-01

Angewandte Chemie

Abstract:Gesellige Röhren: Einwandige Kohlenstoff-Nanoröhren (SWNTs), die hoch hybridisierbare DNA-Sequenzen tragen, wurden hergestellt; es gelang eine hybridisierungsgetriebene Aggregation und Redispersion der Konjugate (siehe Bild). Die DNA-SWNT-Konjugate ließen sich als Baueinheiten für die DNA-programmierte Selbstorganisation von Materialien verwenden und sollten herkömmlichen Systemen gleichkommen oder diese sogar übertreffen.
DNA‐Encoded Self‐Assembly of Gold Nanoparticles into One‐Dimensional Arrays

ZX Deng,Y Tian,SH Lee,AE Ribbe,CD Mao

DOI: https://doi.org/10.1002/anie.200463096

2005-01-01

Angewandte Chemie

Abstract:Strands of gold: Extended one-dimensional arrays of gold nanoparticles up to 4 μm long can be assembled by hybridization between thiolated DNA/nanoparticle 1:1 conjugates and long DNA templates, which were prepared by rolling-circle polymerization (see picture). The linear self-assembled structures could link the nanometric properties of materials with the convenience of micrometric manipulation.
Dna-Directed Self-Assembly of Gold Nanoparticles into Binary and Ternary Nanostructures

Hui Yao,Changqing Yi,Chi-Hung Tzang,Junjie Zhu,Mengsu Yang

DOI: https://doi.org/10.1088/0957-4484/18/1/015102

IF: 3.5

2006-01-01

Nanotechnology

Abstract:The assembly and characterization of gold nanoparticle-based binary and ternary structures are reported. Two strategies were used to assemble gold nanoparticles into ordered nanoscale architectures: in strategy 1, gold nanoparticles were functionalized with single-strand DNA (ssDNA) first, and then hybridized with complementary ssDNA-labelled nanoparticles to assemble designed architectures. In strategy 2, the designed architectures were constructed through hybridization between complementary ssDNA first, then by assembling gold nanoparticles to the scaffolding through gold-sulfur bonds. Both TEM measurements and agarose gel electrophoresis confirmed that the latter strategy is more efficient in generating the designed nanostructures.
Self-assembly of Double Helical Nanostructures Inside Carbon Nanotubes.

Cheng Lv,Qingzhong Xue,Meixia Shan,Nuannuan Jing,Cuicui Ling,Xiaoyan Zhou,Zhiyong Jiao,Wei Xing,Zifeng Yan

DOI: https://doi.org/10.1039/c2nr33157h

IF: 6.7

2012-01-01

Nanoscale

Abstract:We use molecular dynamics (MD) simulations to show that a DNA-like double helix of two poly(acetylene) (PA) chains can form inside single-walled carbon nanotubes (SWNTs). The computational results indicate that SWNTs can activate and guide the self-assembly of polymer chains, allowing them to adopt a helical configuration in a SWNT through the combined action of the van der Waals potential well and the π-π stacking interaction between the polymer and the inner surface of SWNTs. Meanwhile both the SWNT size and polymer chain stiffness determine the outcome of the nanostructure. Furthermore, we also found that water clusters encourage the self-assembly of PA helical structures in the tube. This molecular model may lead to a better understanding of the formation of a double helix biological molecule inside SWNTs. Alternatively, it could form the basis of a novel nanoscale material by utilizing the 'empty' spaces of SWNTs.
Control of Self-Assembly of DNA Tubules Through Integration of Gold Nanoparticles

J. Sharma,R. Chhabra,A. Cheng,J. Brownell,Yan Liu,Hao Yan

DOI: https://doi.org/10.1126/science.1165831

IF: 56.9

2009-01-02

Science

Abstract:The assembly of nanoparticles into three-dimensional (3D) architectures could allow for greater control of the interactions between these particles or with molecules. DNA tubes are known to form through either self-association of multi-helix DNA bundle structures or closing up of 2D DNA tile lattices. By the attachment of single-stranded DNA to gold nanoparticles, nanotubes of various 3D architectures can form, ranging in shape from stacked rings to single spirals, double spirals, and nested spirals. The nanoparticles are active elements that control the preference for specific tube conformations through size-dependent steric repulsion effects. For example, we can control the tube assembly to favor stacked-ring structures using 10-nanometer gold nanoparticles. Electron tomography revealed a left-handed chirality in the spiral tubes, double-wall tube features, and conformational transitions between tubes.

Medicine
Microstructure and Electrochemical Properties of Single-Walled Carbon Nanotube-Dna Hybrids

Yang Liu-quan,Xiang Dong-ya,Yang Quan-hong,Zhao Zhuo

IF: 5.7

2008-01-01

New Carbon Materials

Abstract:The microstructure and electrochemical properties of hybrids, combining single-walled carbon nanotubes (SWCNTs) and DNA, were investigated. TEM images of the SWCNT-DNA hybrids show that most bundled SWCNTs in the starting materials are isolated into individual ones during the sonication-promoted self-assembly. AFM observation further indicates that the sidewalls of SWCNTs are helically wrapped by DNA, which results in stable SWCNT-DNA complexes. The catalyst particles are totally removed during this self-assembly process, thus the SWCNTs are also purified. The electrochemical properties of the SWCNTs are substantially improved due to the hybridization of DNA and the specific capacitance of the SWCNT-DNA hybrids is increased by of 117.9% compared to the parent SWCNTs.
Self-assembly of carbon nanotubes into two-dimensional geometries using DNA origami templates

Hareem T Maune, Si-ping Han, Robert D Barish, Marc Bockrath, William A Goddard Iii, Paul WK Rothemund, Erik Winfree

2010-01-01

Abstract:A central challenge in nanotechnology is the parallel fabrication of complex geometries for nanodevices. Here we report a general method for arranging single-walled carbon nanotubes in two dimensions using DNA origami—a technique in which a long single strand of DNA is folded into a predetermined shape. We synthesize rectangular origami templates (∼75 nm × 95 nm) that display two lines of single-stranded DNA ‘hooks’ in a cross pattern with ∼6 nm resolution. The perpendicular lines of hooks serve as sequence-specific binding sites for two types of nanotubes, each functionalized non-covalently with a distinct DNA linker molecule. The hook-binding domain of each linker is protected to ensure efficient hybridization. When origami templates and DNA-functionalized nanotubes are mixed, strand displacement-mediated deprotection and binding aligns the nanotubes into cross-junctions. Of several cross …
Covalently Linked Deoxyribonucleic Acid with Multiwall Carbon Nanotubes: Synthesis and Characterization

WW Chen,CH Tzang,JX Tang,MS Yang,ST Lee

DOI: https://doi.org/10.1063/1.1880439

IF: 4

2005-01-01

Applied Physics Letters

Abstract:We have developed a multistep method to covalently link functionalized multiwall carbon nanotubes (MWNT) to deoxyribonucleic acid (DNA) oligonucleotides. X-ray photoelectron spectroscopy was used to characterize the initial chemical modification to form amine-terminated MWNTs, which were then covalently combined with DNA. The morphology recorded by atomic force microscopy gave direct and explicit imaging of the resulting DNA-MWNT adducts, showing that chemical functionalization occurred at the ends and sidewalls of MWNTs. The present methodology is an important first step in realizing a DNA-guided self-assembly process for carbon nanotubes.
Nanoparticle Assembly: Folding of Nanoparticle Chains into 2D Arrays: Structural Change of DNA-Functionalized Gold Nanoparticle Assemblies (adv. Mater. Interfaces 13/2018)

Shota Shiraishi,Li Yu,Yoshitsugu Akiyama,Guoqing Wang,Tomoka Kikitsu,Kazuo Miyamura,Tohuru Takarada,Mizuo Maeda

DOI: https://doi.org/10.1002/admi.201870061

IF: 5.4

2018-01-01

Advanced Materials Interfaces

Abstract:1D chains of gold nanoparticles covered with short double-stranded (ds) DNA (red) undergoes a spontaneous structural change into 2D arrays on the substrate surface. This change is achieved by using interparticle attractive forces emerging in a drying process between surface-bound dsDNAs, due to terminal blunt-end stacking interaction. This is reported by Shota Shiraishi, Tohuru Takarada and co-workers in article number 1800189.
DNA-Mediated Assembly of Carbon Nanomaterials.

Xurong Zhu,Xuehui Yan,Sichang Yang,Yong Wang,Shuang Wang,Ye Tian

DOI: https://doi.org/10.1002/cplu.202200089

2022-01-01

ChemPlusChem

Abstract:Carbon nanomaterials (CNMs) have attracted extensive attentions on account of their superior electrical, mechanical, optical, and biological properties. However, the dimensional limit and irregular arrangement have hampered their further application. It is necessary to find an easy, efficient and controllable way to assemble CNMs into well-ordered array. DNA nanotechnology, owning to the advantages of precise programmability, highly structural predictability and spatial addressability, has been widely applied in the assembly of CNMs. Summarizing the progress and achievements in this field will be of great value to related studies. Herein, based on the different dimensions of CNMs containing 0-dimensional (0D) carbon dots (CDs), fullerenes, 1-dimensional (1D) carbon nanotubes (CNTs) and 2-dimensional (2D) graphene, we introduced the conjugation strategies between DNA and CNMs, their different assembly methods and their applications. In addition, we also discuss the existing challenges and future opportunities in the field.
Noncovalent assembly of carbon nanotubes and single-stranded DNA: an effective sensing platform for probing biomolecular interactions.

Ronghua Yang,Zhiwen Tang,Jilin Yan,Huaizhi Kang,Youngmi Kim,Zhi Zhu,Weihong Tan

DOI: https://doi.org/10.1021/ac801118p

IF: 7.4

2008-01-01

Analytical Chemistry

Abstract:In this paper, we report the assembly of single-walled carbon nanotubes (SWNTs) and single-stranded DNA to develop a new class of fluorescent biosensors which are able to probe and recognize biomolecular interactions in a homogeneous format. This novel sensing platform consists of a structure formed by the interaction of SWNTs and dye-labeled DNA oligonucleotides such that the proximity of the nanotube to the dye effectively quenches the fluorescence in the absence of a target. Conversely, and very importantly, the competitive binding of a target DNA or protein with SWNTs for the oligonucleotide results in the restoration of fluorescence signal in increments relative to the fluorescence without a target. This signaling mechanism makes it possible to detect the target by fluorescence spectroscopy. In the present study, the schemes for such fluorescence changes were examined by fluorescence anisotropy and fluorescence intensity measurements for DNA hybridization and aptamer-protein interaction studies.

DNA-Directed Assembly of Single-Wall Carbon Nanotubes

Carbon Nanotube DNA Sensor and Sensing Mechanism.

DNA‐Wrapped Single Walled Carbon Nanotubes As Rigid Templates for Assembling Linear Gold Nanoparticle Arrays

DNA-directed Self-Assembling of Carbon Nanotubes.

DNA origami templated self-assembly of discrete length single wall carbon nanotubes.

Self-assembled Branched Nanostructures of Single-Walled Carbon Nanotubes with DNA As Linkers

Proton-fueled DNA-duplex-based stimuli-responsive reversible assembly of single-walled carbon nanotubes.

Triplex inducer-directed self-assembly of single-walled carbon nanotubes: a triplex DNA-based approach for controlled manipulation of nanostructures.

Organizing Single-Walled Carbon Nanotubes on Gold Using a Wet Chemical Self-Assembling Technique

Hybridization Chain Reaction Triggered Controllable One-Dimensional Assembly of Gold Nanoparticles

Grafting Single‐Walled Carbon Nanotubes with Highly Hybridizable DNA Sequences: Potential Building Blocks for DNA‐Programmed Material Assembly

DNA‐Encoded Self‐Assembly of Gold Nanoparticles into One‐Dimensional Arrays

Dna-Directed Self-Assembly of Gold Nanoparticles into Binary and Ternary Nanostructures

Self-assembly of Double Helical Nanostructures Inside Carbon Nanotubes.

Control of Self-Assembly of DNA Tubules Through Integration of Gold Nanoparticles

Microstructure and Electrochemical Properties of Single-Walled Carbon Nanotube-Dna Hybrids

Self-assembly of carbon nanotubes into two-dimensional geometries using DNA origami templates

Covalently Linked Deoxyribonucleic Acid with Multiwall Carbon Nanotubes: Synthesis and Characterization

Nanoparticle Assembly: Folding of Nanoparticle Chains into 2D Arrays: Structural Change of DNA-Functionalized Gold Nanoparticle Assemblies (adv. Mater. Interfaces 13/2018)

DNA-Mediated Assembly of Carbon Nanomaterials.

Noncovalent assembly of carbon nanotubes and single-stranded DNA: an effective sensing platform for probing biomolecular interactions.