Inverse kinematics analysis of robot based on neural networks

YOU Hui-sheng,FANG Kang-ling,XUE Xiao-qin,QIU Cong-ming

2008-01-01

Abstract:The method of solving inverse kinematics of robot based on BP neural networks is presented in this paper.Detailed steps of this algorithm and the proceeding that should be noticed are presented.Using simulation of KLD-600,we can draw a conclusion that this algorithm is simple and credible.

What problem does this paper attempt to address?

Simulation of a 7R Manipulator Inverse Calibration by Using an Optimized Neural Network Based on Beetle Antennae Search Algorithm

Yuxiang Wang,Zhangwei Chen,Hongfei Zu,Xiang Zhang

DOI: https://doi.org/10.1115/imece2019-11199

2019-01-01

Abstract:Abstract This paper proposes an intelligent technique by combining multilayer feed-forward neural networks (MLFNN) and beetle antennae search (BAS) algorithm for the inverse calibration of a 7R manipulator. First of all, the MLFNN is optimized by BAS. Then, the optimized BAS-MLFNN method is employed for the nonlinear mapping from the true angles of the joint to the errors of the joint. The true angle values of the joints are selected as the inputs and the joint errors as the outputs. The simulation of calibration is implemented on a Kuka’s LWR manipulator. Numerical simulation results show that compared with the commonly used BPNN, the proposed BAS-MLFNN method possesses better performance in terms of higher precision.
Learning biped locomotion based on Q-learning and neural networks

Peng Ziqiang,Pan Gang,Yu Ling

DOI: https://doi.org/10.1007/978-3-642-25553-3_39

2011-01-01

Abstract:Robot postures are transformed continuously until an impact occurs. In order to solve the continuous state problem, a Q-Learning controller based on Back-Propagation (BP) Neural Networks is designed. Instead of Q table, a Multi-input Multi-output BP Neural Network is employed to compute Q value for continuous state. Eligibility trace is used to solve time reliability problem in Q-Learning, and we integrate the eligibility trace algorithm to the gradient descent method for continuous state. To avoid dimension explosion, an inverted pendulum pose-energy model is built to reduce the dimension of the input state space. For the sake of balance between "explore" and "exploit" of Q-Learning, we use a new ε-greedy method with a variable stochastic probability, which decreases with the increasing of the step number. Simulation results indicate that the proposed method is effective. © 2011 Springer-Verlag.
An Algorithm for Solving Robot Inverse Kinematics Based on FOA Optimized BP Neural Network

Yonghua Bai,Minzhou Luo,Fenglin Pang

DOI: https://doi.org/10.3390/app11157129

2021-08-02

Applied Sciences

Abstract:The solution of robot inverse kinematics has a direct impact on the control accuracy of the robot. Conventional inverse kinematics solution methods, such as numerical solution, algebraic solution, and geometric solution, have insufficient solution speed and solution accuracy, and the solution process is complicated. Due to the mapping ability of the neural network, the use of neural networks to solve robot inverse kinematics problems has attracted widespread attention. However, it has slow convergence speed and low accuracy. This paper proposes the FOA optimized BP neural network algorithm to solve inverse kinematics. It overcomes the shortcomings of low convergence accuracy, slow convergence speed, and easy to fall into local minima when using BP neural network to solve inverse kinematics. The experimental results show that using the trained FOA optimized BP neural network to solve the inverse kinematics, the maximum error range of the output joint angle is [−0.04686, 0.1271]. The output error of the FOA optimized BP neural network algorithm is smaller than that of the ordinary BP neural network algorithm and the PSO optimized BP neural network algorithm. Using the FOA optimized BP neural network algorithm to solve the robot kinematics can improve the control accuracy of the robot.
Research on the Inverse Kinematics Prediction of a Soft Biomimetic Actuator via BP Neural Network

Huichen Ma,Junjie Zhou,Jian Zhang,Lingyu Zhang

DOI: https://doi.org/10.1109/ACCESS.2022.3194153

2022-08-10

Abstract:In this work, we address the inverse kinetics problem of motion planning of soft biomimetic actuators driven by three chambers. Soft biomimetic actuators have been applied in many applications owing to their intrinsic softness. Although a mathematical model can be derived to describe the inverse dynamics of this actuator, it is still not accurate to capture the nonlinearity and uncertainty of the material and the system. Besides, such a complex model is time-consuming, so it is not easy to apply in the real-time control unit. Therefore, developing a model-free approach in this area could be a new idea. To overcome these intrinsic problems, we propose a back-propagation (BP) neural network learning the inverse kinetics of the soft biomimetic actuator moving in three-dimensional space. After training with sample data, the BP neural network model can represent the relation between the manipulator tip position and the pressure applied to the chambers. The proposed algorithm is more precise than the analytical model. The results show that a desired terminal position can be achieved with a degree of accuracy of 2.46% relative average error with respect to the total actuator length.

Robotics,Neural and Evolutionary Computing
Inverse Kinematics of 6R Robots Based on the Orthogonal Character of Rotation Sub-matrix

Yong-lun CHENG,Shi-qiang ZHU,Song-guo LIU

DOI: https://doi.org/10.3321/j.issn:1002-0446.2008.02.012

2008-01-01

Abstract:Based on the kinematics equation and the orthogonal character of the rotation sub-matrix in a transformation matrix, an approach to the inverse kinematics problem of 6R robots is proposed. The problem is reduced to four nonlinear constant coefficient equations including only four unknown variables through vector operation, and then eight closed-form solutions can be gained by solving the four equations and other suitable additional equations. The experimental results with QJ-1 welding robot illustrate that the proposed algorithm can solve the inverse kinematics problem in only 0.087 ms, which is faster than the traditional inverse transformation method on the same experiment platform, and simulating results on planar condition also prove the effectiveness of the proposed algorithm. The proposed algorithm can be applied to 6R robot on-line control system with a strong real-time performance.
A New Artificial Neural Network Approach in Solving Inverse Kinematics of Robotic Arm (Denso VP6242)

Ahmed R. J. Almusawi,L. Canan Dülger,Sadettin Kapucu

DOI: https://doi.org/10.1155/2016/5720163

IF: 3.12

2016-01-01

Computational Intelligence and Neuroscience

Abstract:This paper presents a novel inverse kinematics solution for robotic arm based on artificial neural network (ANN) architecture. The motion of robotic arm is controlled by the kinematics of ANN. A new artificial neural network approach for inverse kinematics is proposed. The novelty of the proposed ANN is the inclusion of the feedback of current joint angles configuration of robotic arm as well as the desired position and orientation in the input pattern of neural network, while the traditional ANN has only the desired position and orientation of the end effector in the input pattern of neural network. In this paper, a six DOF Denso robotic arm with a gripper is controlled by ANN. The comprehensive experimental results proved the applicability and the efficiency of the proposed approach in robotic motion control. The inclusion of current configuration of joint angles in ANN significantly increased the accuracy of ANN estimation of the joint angles output. The new controller design has advantages over the existing techniques for minimizing the position error in unconventional tasks and increasing the accuracy of ANN in estimation of robot’s joint angles.

mathematical & computational biology,neurosciences
A Strong Real Time Algorithm For Inverse Kinematics Of 6r Robots

Huashan Liu,Shiqiang Zhu,Jianbo Wu

2009-01-01

Abstract:Different from the traditional method, we propose a novel algorithm based oil vector dot product and orthogonal matrix for inverse kinematics of 6R robots, which features in strong real time performance and no extraneous roots in the solving process. By using the character that the rotation sub-matrix is an orthogonal Zn matrix, the complex solution procedures of inverse matrix are avoided. Then the kinematics equations containing 6 unknown joint angle variables can be reconstructed to 10 pure algebraic equations by vector dot product. Particularly, aiming to improve the real time performance further, we optimized the linear combinations of the related equations for the 5th and 6th joint angle variables. Also, we utilize MAPLE in symbolic operations to increase the accuracy of solutions. Finally, experiments oil a 6R robot are implemented, which show that, the proposed algorithm can solve the equations in an average time of only 9.936 mu s, and makes a good performance in the practical strong real time motion control situation.
Data-Driven Inverse Kinematics Approximation of a Delta Robot with Stepper Motors

Anni Zhao,Arash Toudeshki,Reza Ehsani,Jian-Qiao Sun

DOI: https://doi.org/10.3390/robotics12050135

IF: 3.7

2023-09-30

Robotics

Abstract:The Delta robot is a parallel robot that is over-actuated and has a highly nonlinear dynamic model, which poses a significant challenge to its control design. The inverse kinematics that maps the motor angles to the position of the end effector is highly nonlinear and extremely important for the control design of the Delta robot. It has been experimentally shown that geometry-based inverse kinematics is not accurate enough to capture the dynamics of the Delta robot due to manufacturing component errors, measurement errors, joint flexibility, backlash, friction, etc. To address this issue, we propose a neural network model to approximate the inverse kinematics of the Delta robot with stepper motors. The neural network model is trained with randomly sampled experimental data and implemented on the hardware in an open-loop control for trajectory tracking. Extensive experimental results show that the neural network model achieves excellent performance in terms of the trajectory tracking of the Delta robot under different operation conditions, and outperforms the geometry-based inverse kinematics model. A critical numerical observation indicates that neural networks trained with the specific trajectory data fall short of anticipated performance due to a lack of data. Conversely, neural networks trained on random experimental data capture the rich dynamics of the Delta robot and are quite robust to model uncertainties compared to geometry-based inverse kinematics.
A Redundant Manipulator Inverse Kinematic Resolution Based on RBF Net

YE Xiaoling,ZHA Ting,HU Kai

DOI: https://doi.org/10.3969/j.issn.1674-7070.2011.05.017

2011-01-01

Abstract:Aiming at the characteristics of nonlinear,strong coupling and time-varying in the field of redundant manipulator kinematics,a method of nonlinear fitting and system identification based on radial basic function(RBF) neural network is adopted.RBF neural network,with the capabilities of good approximation,fast convergence,strong nonlinear processing ability and etc.,can effectively resolve the redundant manipulator inverse kinematics problem.Meanwhile,the center parameters of RBF network are selected by genetic algorithm to improve the performance and efficiency.The 6-DOF manipulator kinematic modeling and simulation is implemented with Matlab and the calculated results verify the effectiveness of the method proposed in this paper.
Utilization of multilayer perceptron for determining the inverse kinematics of an industrial robotic manipulator

Sandi Baressi Šegota,Nikola Anđelić,Vedran Mrzljak,Ivan Lorencin,Ivan Kuric,Zlatan Car

DOI: https://doi.org/10.1177/1729881420925283

IF: 1.714

2021-07-01

International Journal of Advanced Robotic Systems

Abstract:Inverse kinematic equations allow the determination of the joint angles necessary for the robotic manipulator to place a tool into a predefined position. Determining this equation is vital but a complex work. In this article, an artificial neural network, more specifically, a feed-forward type, multilayer perceptron (MLP), is trained, so that it could be used to calculate the inverse kinematics for a robotic manipulator. First, direct kinematics of a robotic manipulator are determined using Denavit–Hartenberg method and a dataset of 15,000 points is generated using the calculated homogenous transformation matrices. Following that, multiple MLPs are trained with 10,240 different hyperparameter combinations to find the best. Each trained MLP is evaluated using the R 2 and mean absolute error metrics and the architectures of the MLPs that achieved the best results are presented. Results show a successful regression for the first five joints (percentage error being less than 0.1%) but a comparatively poor regression for the final joint due to the configuration of the robotic manipulator.

robotics
Inverse Kinematics of an Equal Length Links Planar Hyper Redundant Manipulator Using Neural Networks

Yahya, S.,Mohamed, H.A.F.,Moghavvemi, M.,Yang, S.S.

2009-01-01

Abstract:An iterative method using the neural networks to solve the inverse kinematics problem for equal length links redundant manipulators is presented in this paper. The training phase, calculating the neural networks weights, is accomplished for a new proposed geometrical method to solve the problem of multi-solution caused by redundancy. The use of this geometrical method results in one solution among the infinite solutions of the inverse kinematics of the redundant manipulators. This method is very effective for avoiding the singularity problem because it guarantees that there is no lining up for two or more links. Another advantage for this method is that the angles between the links will be set between two maximum and minimum values. This means that the end-effecter can reach any point on the desired path and the angles between the links will not be less than the minimum limit or more than the maximum limit, which makes this method effective for joint limits. To demonstrate the effectiveness of this proposed method, experiments were conducted on an 8 links hyper redundant manipulator in this paper. In addition, the workspace of the manipulator is calculated for this proposed method.
Optimized Inverse Kinematics Algorithm with High Accuracy for General 6R Robots

Liu Songguo,Zhu Shiqiang,Wang Xuanyin,Cheng Yonglun

DOI: https://doi.org/10.3969/j.issn.1000-1298.2007.11.029

2007-01-01

Abstract:In order to improve the accuracy and efficiency of the inverse kinematics algorithm for general 6R robots, an optimized algorithm was proposed based on symbolic processing and matrix decomposition. The 6 basic inverse kinematics equations were transformed, and symbolic preprocessing was applied to gain 14 inverse kinematics equations without any accumulative errors caused by float point computations. By exploiting the characteristic that 6 equations among them were independent on joint variable 3, the order of the target matrix was reduced from 24 to 16, as while as the number of the included joint variables was increased from 3 to 4. The problem of solving a polynomial of degree 16 was optimized to decomposing a matrix of order 16, and elements with the higher magnitude were selected for calculating the joint variables, so the accuracy was enhanced in a further step. Experiments on general 6R robots show that, the proposed inverse kinematics algorithm can seek 16 real solutions at most with any required accuracy.
Whole-Body Inverse Kinematics and Operation-Oriented Motion Planning for Robot Mobile Manipulation

Tianlei Jin,Hongwei Zhu,Jiakai Zhu,Shiqiang Zhu,Zaixing He,Shuyou Zhang,Wei Song,Jason Gu

DOI: https://doi.org/10.1109/tii.2024.3441661

IF: 12.3

2024-01-01

IEEE Transactions on Industrial Informatics

Abstract:High DoF mobile manipulation of robots is a nonlinear, nonchain redundant problem. In this article, we focus on two subissues of robot mobile manipulation: whole-body inverse kinematics (whole-body IK) and operation-oriented motion planning (OOMP). Whole-body IK solves the robot arm joint configuration and the mobile base position configuration according to the target pose. OOMP generates a feasible trajectory from the current pose to the target pose. The trajectory can avoid obstacles and touch operated objects. We introduce neural network optimization (NNO) methods with two variations to solve whole-body IK and OOMP, respectively. For whole-body IK, we design a fully connected network (FCN) to predict ten DoF of position and joint configurations based on the target pose. We use these ten DoF configurations to derive the predicted pose for online optimization. For OOMP, we design a GRU-based network to generate trajectories based on the initial and goal states. We mainly adopt sphere masks to modify the point cloud properties of the target object dynamically. During optimization, the trajectory keeps away from point clouds but approaches sphere masks. Finally, we conduct extensive experiments both on a Franka Panda robot and a mobile dual-arm robot. The results demonstrate the superior performance of our NNO method on whole body IK and OOMP, and implement mobile manipulation in different environments successfully.
Real Time Control Application of the Robotic Arm Using Neural Network Based Inverse Kinematics Solution

Nurettin Gökhan ADAR

DOI: https://doi.org/10.16984/saufenbilder.907312

2021-05-18

Sakarya University Journal of Science

Abstract:Robotic arms are widely used in many industrial applications at present. The control of robotic arms involves position coordination Cartesian space by a forward/inverse kinematics solution method. The inverse kinematics is difficult for real-time control applications, computational requirements are intensive and the run-time is high. The traditional solution methods used geometric, algebraic, and numerical iterative techniques are inadequate and slow in the inverse kinematics solution. Recently, alternative solution methods based on artificial intelligence techniques have been developed to solve the inverse kinematics problem. In this study, a multi-layered feed-forward Artificial Neural Network model was developed to solve the inverse kinematics of the 5 degrees of freedom robotic arm. Using the Proportional-Integral control algorithm combined with this Artificial Neural Network model, the real-time position control of the robotic arm was accomplished. The obtained results were compared with the PI control supported by an analytical inverse kinematics solution in real-time. The results showed that the PI control combined with Artificial Neural Network has superior tracking ability, smaller control error, and better absolute fit to the reference.

English Else
Parallel Robots Pose Accuracy Compensation Using Artificial Neural Networks

Dy Yu,Dc Cong,Jw Han

2005-01-01

Abstract:Parallel robots pose accuracy compensation approach using artificial neural networks has been developed. In this method, an artificial neural network is used with conventional inverse kinematics computation module in parallel. A back propagation neural network is designed and implemented to learn parallel robot kinematics model error. The trained neural network can be used to performed on-line pose accuracy compensation in task. Simulation and experimental results for a parallel robot are presented to show the effectiveness of the compensation method based on neural networks.
Real-time Inverse Kinematics Algorithm Based on Vector Dot Product

Huashan Liu,Shiqiang Zhu,Jianbo Wu,Songguo Liu

2009-01-01

Abstract:In order to improve the real-time performance of inverse kinematics for 6R robots, a real-time and efficient algorithm based on vector dot product was proposed. The complex matrix equations were transformed to 10 pure algebraic equations containing 6 unknown joint variables, and symbolic preprocessing was applied in simplifying equations without any error accumulations caused by floating-point calculations. The production of extraneous roots in the solving process of the 5th and 6th joint variables was avoided by optimizing the linear combinations of related equations, which greatly improved the efficiency of the algorithm. Experiments on a 6R robot show that, the proposed algorithm has a stronger real-time performance than those of others to get the same precision solutions, the average time for gaining 8 accurate closed-form solutions is only 0.014 ms, and it can be applied efficiently in the practical on-line robot control.
Implementation of singularity-free inverse kinematics for humanoid robotic arm using Bayesian optimized deep neural network

Omur Aydogmus,Gullu Boztas

DOI: https://doi.org/10.1016/j.measurement.2024.114471

IF: 5.6

2024-04-01

Measurement

Abstract:This study presents the efficacy of deep learning techniques in controlling the arm of a humanoid robot without resorting to inverse kinematic analysis. Emphasizing real-time applicability, a straightforward deep neural network (DNN) structure is developed and optimized using hyperparameter Bayesian optimization. The Keras Bayesian Optimization Tuner with Gaussian process fine-tunes the DNN architecture. Utilizing a simulation environment and generating around 10 billion datasets, the optimized DNN is evaluated on both simulated and real robots. Impressively, the trained DNN exhibits a notable ability to predict robot control within a 25 ms timeframe, achieving a total Mean Absolute Error (MAE) of 0.02 for the xyz-axes. These results underscore the potential of deep learning-based approaches in humanoid robot arm control, eliminating the need for inverse kinematic equations and providing valuable insights for future robotic system development.

engineering, multidisciplinary,instruments & instrumentation
Inverse Kinematics of a RSRR HeIse wheel using Neural Networks

Jose F. Flores,Hector A. Moreno,Isela G. Carrera,Mario A. Garcia,Roberto G. Adan

DOI: https://doi.org/10.1109/comrob53312.2021.9628728

2021-10-27

Abstract:The RSRR HeIse wheel is a 2 DOF mechanism that can transform a circular wheel into a hybrid wheel with multiple limbs. Solving the inverse kinematics of this mechanism requires solving a system of non-linear equations with multiple solutions. In order to find an efficient algorithm for on-line computation of the inverse kinematics, in this work we explore the use of artificial neural networks. The analytical solution of forward kinematics is used to generate the data set for the neural networks training. Different structures of networks are tested and their performance in terms of accuracy is discussed. The results of a simulation using the obtained model shows the efficacy of this method.
Complete analytical inverse kinematics for NAO

Nikos Kofinas,Emmanouil Orfanoudakis,Michail G. Lagoudakis

DOI: https://doi.org/10.1109/robotica.2013.6623524

2013-04-01

Abstract:The design of complex dynamic motions for humanoid robots is achievable only through the use of robot kinematics. In this paper, we study the problems of forward and inverse kinematics for the Aldebaran NAO humanoid robot and present a complete, exact, analytical solution to both problems, including a software library implementation for realtime on-board execution. The forward kinematics allow NAO developers to map any configuration of the robot from its own joint space to the three-dimensional physical space, whereas the inverse kinematics provide closed-form solutions to finding joint configurations that drive the end effectors of the robot to desired target positions in the three-dimensional physical space. The proposed solution was made feasible through a decomposition into five independent problems (head, two arms, two legs), the use of the Denavit-Hartenberg method, and the analytical solution of a non-linear system of equations. The main advantage of the proposed inverse kinematics solution compared to existing approaches is its accuracy, its efficiency, and the elimination of singularities. In addition, we suggest a generic guideline for solving the inverse kinematics problem for other humanoid robots. The implemented, freely-available, NAO kinematics library, which additionally offers center-of-mass calculations, is demonstrated in two motion design tasks: basic center-of-mass balancing and pointing to the ball.

Inverse kinematics analysis of robot based on neural networks

Simulation of a 7R Manipulator Inverse Calibration by Using an Optimized Neural Network Based on Beetle Antennae Search Algorithm

Learning biped locomotion based on Q-learning and neural networks

An Algorithm for Solving Robot Inverse Kinematics Based on FOA Optimized BP Neural Network

Research on the Inverse Kinematics Prediction of a Soft Biomimetic Actuator via BP Neural Network

Inverse Kinematics of 6R Robots Based on the Orthogonal Character of Rotation Sub-matrix

A New Artificial Neural Network Approach in Solving Inverse Kinematics of Robotic Arm (Denso VP6242)

A Strong Real Time Algorithm For Inverse Kinematics Of 6r Robots

Data-Driven Inverse Kinematics Approximation of a Delta Robot with Stepper Motors

A Redundant Manipulator Inverse Kinematic Resolution Based on RBF Net

Utilization of multilayer perceptron for determining the inverse kinematics of an industrial robotic manipulator

Inverse Kinematics of an Equal Length Links Planar Hyper Redundant Manipulator Using Neural Networks

Optimized Inverse Kinematics Algorithm with High Accuracy for General 6R Robots

Whole-Body Inverse Kinematics and Operation-Oriented Motion Planning for Robot Mobile Manipulation

Real Time Control Application of the Robotic Arm Using Neural Network Based Inverse Kinematics Solution

Parallel Robots Pose Accuracy Compensation Using Artificial Neural Networks

Real-time Inverse Kinematics Algorithm Based on Vector Dot Product

Implementation of singularity-free inverse kinematics for humanoid robotic arm using Bayesian optimized deep neural network

Inverse Kinematics of a RSRR HeIse wheel using Neural Networks

Complete analytical inverse kinematics for NAO