Abstract:This paper provides the stress and electric field intensity factors for some common piezoelectric fracture mechanics specimens with electrically conducting cracks or electrodes. Firstly, the solution for a vertical crack with electrically conducting boundary condition on its surfaces is established for a piezoelectric strip under combining mechanical and electrical loads. Then, a surface-cracked strip, a double edge cracked strip, and a center-cracked strip, subjected to uniform stress and electric field loads simultaneously, are investigated. Also investigated is an edge-cracked strip under pure bending and uniform electric field loads. The influence of piezoelectric effect on the stress and electric field intensity factors is found to be insignificant, suggesting that the stress intensity factors of piezoelectric materials under mechanical loads can be obtained in a same way as ordinary brittle solids, and the electric field intensity factors of piezoelectric materials under electric field loads can be obtained in a same way as ordinary dielectrics. However, the results show that the mechanical loads can produce electric field intensity factors, and the electric field loads can produce stress intensity factors in piezoelectric materials, due to the fact that the medium has finite size.

A piezoelectric material strip with a crack perpendicular to its boundary surfaces

Exact Solution to the Problem of A Half-Plane Crack in A Transversely Isotropic Piezoelectric Body Subjected to Antisymmetric Tangential Point Forces

A PENNY-SHAPED CRACK IN AN INFINITE PIEZOELECTRIC BODY UNDER ANTISYMMETRIC POINT LOADS

Surface Cracking of a Piezoelectric Strip Bonded to an Elastic Substrate (mode I Crack Problem)

A Cracked Piezoelectric Material Strip under Transient Thermal Loading

Mixed mode crack initiation in piezoelectric ceramic strip

A Cracked Piezoelectric Material under Generalized Plane Electromechanical Impact

Fracture Of A Piezoelectric Material Layer Bonded By Two Elastic Layers

A Mode Iii Crack in A Functionally Graded Piezoelectric Material Strip

Dynamic Behavior of Two Parallel Symmetric Permeable Cracks in A Piezoelectric Strip

An approach for analysis of poled/depolarized piezoelectric materials with a crack

FRACTURE OF A PIEZOELECTRIC MATERIAL STRIP UNDER STEADY STATE THERMAL LOAD

Applicability of the crack face electrical boundary conditions in piezoelectric mechanics

The Central Crack Problem for a Functionally Graded Piezoelectric Strip

Fracture of a Finite Piezoelectric Strip with a Crack Vertical to Its Borders – an Exact Analysis and Its Applications

Out-of-plane Interface Cracks in Dissimilar Piezoelectric Materials

A mixed electric boundary value problem for a two-dimensional piezoelectric crack

A penny-shaped crack in a transversely isotropic piezoelectric layer

Analysis of Electric Boundary Condition Effects on Crack Propagation in Piezoelectric Ceramics

A Mixed Electric Boundary Value Problem for an Anti-Plane Piezoelectric Crack

Intensity Factors for Some Common Piezoelectric Fracture Mechanics Specimens with Conducting Cracks or Electrodes