Abstract:Shape memory properties of Poly (L-lactide)/Poly (-caprolactone) (PLLA/PCL) blends reinforced with Multiwalled Carbon Nanotubes (MWCNTs) was investigated. PLLA biodegradable shape memory implants have advantages in repair and regeneration of healing tissues. One of the drawbacks of PLLAs for biomedical applications is their brittleness. One of the most practical strategies for tuning the properties of PLLA is blending with PCL. In this research, we have studied the shape memory and mechanical behavior of MWCNT/PLLA/PCL blends nanocomposites. To avoid aggregation and bundling, MWCNTs were washed with ethanol. The samples with various contents of each component were prepared by solution casting. The microstructure, mechanical properties and shape memory effect of the blends and composites were investigated by means of differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM), polarizing optical microscopy (POM) and tensile testing. The relationship between the microstructure and shape memory properties was illuminated. Differential scanning calorimetry (DSC) of MWCNTs/PLA/PCL blends shows two glass transition temperatures (Tg) and two melting points (Tm) at positions close to the pure components revealing phase separation. The Tg and Tm of composites were increased with increasing the MWCNTs content in composites.. The XRD analysis of prepared composites shows there is a significant increase in PCL crystallization in composites by MWCNTs. The tensile tests results shows that the mechanical strength and shape recovery rate were significantly increased with increasing the MWCNTs contents in composites. The crystallinity of blend was increased with increasing the PCL in composition and in composites also the crystallinity was increased with increasing the amount of MWCNTs. The mechanical behaviour of blends and composites shows large strain after yielding and high elastic strain characteristics and exhibition good shape memory effect in which the PLLA crystal and the PCL amorphous serve as fixed phase and reversible phase, respectively. The shape recovery ratio of blend at first was decreased (15%) with increasing the amount of PCL up to 20wt%, then increased (10%) with increasing the amount of PCL until 40wt%. the shape recovery ratio of composites was increased (15%) with increasing the amount of MWCNTs up to 3wt%.

Crystallization, Rheological, and Mechanical Properties of Plla/Peg Blend with Multiwalled Carbon Nanotubes

Synthesis, Stereocomplex Crystallization and Properties of Poly(l‐lactide)/four‐armed Star Poly(d‐lactide) Functionalized Carbon Nanotubes Nanocomposites

Poly(l-lactide)/four-armed Star Poly(l-Lactide) Grafted Multiwalled Carbon Nanotubes Nanocomposites: Preparation, Rheology, Crystallization, and Mechanical Properties

Morphology, Rheology and Crystallization Behavior of Polylactide Composites Prepared Through Addition of Five-Armed Star Polylactide Grafted Multiwalled Carbon Nanotubes

Effect of Multi-Walled Carbon Nanotubes on the Crystallization and Hydrolytic Degradation of Biodegradable Poly(l-Lactide)

Selective Localization Of Multiwalled Carbon Nanotubes In Poly(Epsilon-Caprolactone)/Polylactide Blend

Selective Localization of Multiwalled Carbon Nanotubes in Poly(ε-caprolactone)/Polylactide Blend

Thermo-mechanical Properties of MWCNT-g-poly (L-Lactide)/poly (L-Lactide) Nanocomposites

Crystallinity of Biodegradable Polymers Reinforced with Functionalized Carbon Nanotubes

Shape Memory Properties of Poly(L-Lactide) / Poly(ε-Caprolactone) Blends and Their Composites with Carbon Nanotubes

Control of the Crystalline Morphology of Poly(l-lactide) by Addition of High-Melting-Point Poly(l-lactide) and Its Effect on the Distribution of Multiwalled Carbon Nanotubes

Crystallization Behavior of Biodegradable Poly(l‐lactide)/multiwalled Carbon Nanotubes Nanocomposites from the Amorphous State

Morphologies, crystallization, and mechanical properties of PLA-based nanocomposites: Synergistic effects of PEG/HNTs

Nonisothermal Crystallization Kinetics and Thermomechanical Properties of Multiwalled Carbon Nanotube‐reinforced Poly(ε‐caprolactone) Composites

Thermo-mechanical properties of MWCNT- g -poly ( l -lactide)/poly ( l -lactide) nanocomposites

Effect of Carbon Nanotubes on Shape memory properties of poly (L-lactide)/poly (- caprolactone) blends

Crystallization Behavior and Mechanical Properties of Poly(lactic Acid) Complex Fiber Toughened by Carbon Nanotube Nanocapsules

Synergistic Effects of Polyethylene Glycol and Cellulose Nanofibers on the Isothermal and Non-isothermal Crystallization Behaviors of Polylactide

Effects of Amino Hyperbranched Polymer-Modified Carbon Nanotubes on the Crystallization Behavior of Poly (<i>L</i>-Lactic Acid) (PLLA)

Adjusting Distribution of Multiwall Carbon Nanotubes in Poly(L-lactide)/Poly(oxymethylene) Blends Via Constructing Stereocomplex Crystallites: Toward Conductive and Microwave Shielding Enhancement

Crystallization Behavior of Poly(Sodium 4-Styrenesulfonate)-functionalized Carbon Nanotubes Filled Poly(Epsilon-Caprolactone) Nanocomposites