Abstract:Terephthalic acid is a raw material for polyester and textile industry. However, the by-product 4- Carboxybenzaldehyde in TA is harmful to the polymer process since it can lower the polymerization rate and the average molecular weight. Thus, a hydropurification process is built to decrease 4-CBA. In this process, 4- CBA in TA is purified by hydrogen in water at 270 °C–290 °C under 7.9 MPa pressure over 0.5 wt. % carbon- coated palladium catalyst in a fixed-bed reactor. The activity of the catalyst will gradually decrease with the process running. The most important quality index for this process is the content of 4-CBA in the product. However, in real plant, the content of 4-CBA is analysed every two hours in a laboratory. It is a very large delay for control system so the operation conditions of the process could not be adjusted in time. These may results in a maximum two hours product failure. In this paper, a first principle model of the process is developed based on Aspen Plus. The accuracy of the model is verified by the model results and the actual plant results. Based on this model, a series of sensitive analysis are performed. Six variables include 4-CBA content in TA, react temperature, react pressure, hydrogen flow rate, catalyst activity and Slurry concentration are the main factors influencing the 4-CBA content in the product. Though the aspen model is accurate, these parameters in aspen model are not easy to adjust quickly. In order to predict 4-CBA content quickly, a soft sensor for 4-CBA is developed using recursive kernel partial least squares considering the nonlinearity and slow time-varying of the process. Results show that the prediction accuracy of this method is very high and it is easy for engineers to handle.

Influential factors analysis and soft-measurement of 4-CBA concentration during PTA production

Analysis and Modeling of Industrial Purified Terephthalic Acid Oxidation Process

Modeling soft sensor based on support vector machine and particle swarm optimization algorithms

Fuzzy Neural Network Model of 4-Cba Concentration for Industrial Purified Terephthalic Acid Oxidation Process

Research of 4-CBA Soft-sensor Model Based on Improved FasBack Neuro-fuzzy System

The Research on Soft Sensor of the Concentration of 4-CBA Based on Bayesian Approach

Scalable Multi-Objective Optimization of Industrial Purified Terephthalic Acid (PTA) Oxidation Process

Partition Coefficient of 4-Carboxybenzaldehyde Between Crude Terephthalic Acid Crystals and the Corresponding Aqueous Acetic Acid Solution at (423.2 to 453.0) K

Effect of Water Content on the Kinetics of P-Xylene Liquid-Phase Catalytic Oxidation to Terephthalic Acid

Cstr Model for P-Xylene Oxidation Reactor

Kinetics of P-Xylene Liquid-Phase Catalytic Oxidation to Terephthalic Acid

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Soft Sensor Based on Recursive Kernel Partial Least Squares for 4-Carboxybenzaldehyde of an Industrial Terephthalic Acid Hydropurification Process

Data-driven technology and mechanism model based soft sensor modeling in PTA process

Real-time Optimization of the 4CBA Content in a P-Xylene Oxidation Process

Dynamic model and simulation of hydrogenation reaction process of PTA

Analysis of Water Content in PX Oxidation and Soft Measurement

Dynamic modeling and control of industrial crude terephthalic acid hydropurification process

Modelling and Prediction of Toluene Adsorption Saturation Basing on Characteristic Values of Activated Carbons

Real-Time Application Of Cape-Open For Pta Process Monitoring And Optimization

Control structure design of an industrial crude terephthalic acid hydropurification process with catalyst deactivation