Abstract:In the present seismic design philosophy, the structures are designed to remain within the specified displacement limits for multiple earthquake hazard levels expected during their design life. Accordingly, the estimation of maximum inelastic displacement demand in a structure consistent with a given hazard level is of primary importance. Considering the complexity and inconvenience associated with the nonlinear response history analyses for a suite of hazard‐consistent ground motions, it is preferred to estimate the maximum inelastic displacement demand by using the scaling models available for the inelastic displacement ratio C in the single‐degree‐of‐freedom (SDOF) structures. In this study, a new scaling model is developed for the inelastic displacement ratio CR(T) spectrum for a given response reduction factor R in the case of 5%‐initial damping Bouc‐Wen‐Baber‐Noori (BWBN) oscillators with stiffness and strength degradations and pinching. This model is based on the observed similarities between the CR(T) spectrum and the reciprocal of given displacement response SD(T ) spectrum in most cases, and thus, this indirectly accounts for the effects of seismological and site parameters. A new strong‐motion duration definition is also proposed to identify shorter strong‐motion segments of comparable relevance, and on using this definition, it is shown that the dependence of the mean CR(T) spectrum on strong‐motion duration may be considered negligible. Accordingly, the regression parameters of the proposed scaling model for CR(T) spectrum are estimated as the exponential functions of only five governing BWBN parameters. The best‐fit estimates of the regression coefficients of the resulting prediction equations are obtained for three values of R. The residual error spectra are also modeled to estimate the CR(T) spectrum for a given confidence level. The proposed scaling model can be applied to a wide range of existing reinforced concrete (RC) structures with 5% initial damping by using the input of the design displacement spectrum and BWBN parameters.

Energy Density Spectra in Actively Controlled Inelastic Structures—application

A new average response spectrum method for linear response analysis of structures to spatial earthquake ground motions

Analysis and Control for Transient Responses of Seismic-Excited Hysteretic Structures

Nonstationary Seismic Responses of Structure with Nonlinear Stiffness Subject to Modulated Kanai–Tajimi Excitation

Response Spectra of Two-Story Frames with Racks on the Elastic Floor

Inelastic Yielding Strength Demand Coefficient Spectra

Yield Point Spectra with constant ductility

DYNAMIC CONTROL OF TENSION STRUCTURES

Optimal control for vibration peak reduction via minimizing large responses

Predictive Instantaneous Optimal Control of Inelastic Structures Based on Ground Velocity

Peak Acceleration Response Spectrum of Long Span Floor Vibration by Pedestrian Excitation

Design of Passive Systems for Control of Inelastic Structures

Non-linear stochastic optimal control for coupled-structures system of multi-degree-of-freedom

Perturbation spectrum method for seismic analysis of non-classically damped systems

Stochastic optimal control of coupled structures

Analysis of Response Spectrum for Random Pedestrian Loads

Developments in seismic structural analysis and design

A comparative study of concentrated plasticity models in dynamic analysis of building structures

Response-Spectrum-Based Analysis for Generally Damped Linear Structures

Estimation of inelastic displacement ratio spectrum for existing RC structures via displacement response spectrum

AN EQUIVALENT LINEAR MODEL TO ESTIMATE MAXIMUM INELASTIC SEISMIC RESPONSES OF STRUCTURAL SYSTEMS