Abstract:Chitosan/montmorillonite intercalated composite (CTS/MMT) was used as an effective adsorbent for removal of reactive red 136 (RR136). Taguchi method attached grey relational analysis was applied to determine the optimal adsorption conditions, including pH, initial concentration of dye, temperature, adsorbent dosage and contact time, for achieving simultaneous maximization of removal percentage and adsorption capacity. The percentage contribution of each adsorption condition was determined in the analysis of variance and shown that the most effective parameter is initial concentration of dye. The optimal adsorption conditions were found in pH 3, initial concentration of dye 240 mg/L, temperature 20 degrees C, adsorbent dosage 0.4 g/L and contact time 135 min. Under the optimal condition, the removal percentages and adsorption capacity were 74.7% and 445.38 mg/g, respectively. The adsorption behaviors showed that the adsorption isotherms and kinetics were in best agreement with the Toth isotherm and Brouers-Weron-Sotolongo model, respectively. Applicability of mechanistic models exhibited that film diffusion and infra-particle diffusion were involved in the current adsorption processes and infra-particle diffusion was not the only rate-controlling step. CTS/MMT before and after adsorption were characterized through FT-IR, XRD and SEM. The results indicated that the RR136 adsorption process was not only surface adsorption but intercalation, and -OH, -CONH2 , -NH2, and Si-O group of CTS/MMT were involved in the adsorption process. Moreover, the desorption and regeneration experiments revealed CTS/MMT showed excellent adsorption performance even after 15 adsorption-desorption cycles.

Removal of Congo Red from Aqueous Solution Using A Chitosan/Organo-Montmorillonite Nanocomposite

Adsorption of Congo Red Dye Onto Raw and Chitosan-Modified Bentonite

Adsorption Characteristics of Congo Red Onto the Chitosan/montmorillonite Nanocomposite.

Adsorption behaviors of Congo red on the N,O-carboxymethyl-chitosan/montmorillonite nanocomposite

Synthesis and Characterization of Carboxymethyl Cellulose/organic Montmorillonite Nanocomposites and Its Adsorption Behavior for Congo Red Dye

Adsorption Properties of Congo Red from Aqueous Solution Onto N,O-carboxymethyl-chitosan

Adsorption of Reactive Red 136 Onto Chitosan/montmorillonite Intercalated Composite from Aqueous Solution

Adsorption Characteristics of Congo Red from Aqueous Solution on the Carboxymethylcellulose/Montmorillonite Nanocomposite

Removal of Congo Red Dye from Aqueous Solution with Hydroxyapatite/chitosan Composite

Preparation of Chitosan/Montmorillonite Nanocomposites and Theirs Adsorption Properties for Congo Red Dye

Congo red adsorption on shell powder and chitosan-coated shell powder biosorbents: experiments and theoretical calculation

Study on Adsorption Properties of Lignocellulose/Organic Montmorillonite Nanocomposites

Preparation of Chitin with Different Degrees of Deacetylation from Crab Shells Waste and Its Application in the Removal of Congo Red

The effective removal of Congo red dye via chitosan-layered double hydroxide composite and the deep insight into mechanism

Adsorptive removal of Congo red from aqueous solutions using crosslinked chitosan and crosslinked chitosan immobilized bentonite.

Adsorption of congo red onto lignocellulose/montmorillonite nanocomposite

Removal of Methyl Orange from Aqueous Solution with Crosslinked Quaternized Chitosan/bentonite Composite

Characterization and Congo Red uptake capacity of a new lignocellulose/organic montmorillonite composite

Adsorption and Desorption Properties for Congo Red Dye of Carboxymethylcellulose/montmorillonite Nanocomposites

Chitosan/Silica Nanocomposite Preparation from Shrimp Shell and Its Adsorption Performance for Methylene Blue

Adsorption kinetics of chitosan/montmorillonite intercalation composites for Reactive Red dye and desorption properties