Abstract:This experimental study examines the coherent swirling vortex rings in a turbulent pulsed jet at a Reynolds number Re = 1.0 x 104 using planar particle image velocimetry. The coherent vortex rings are produced by a stepper-motor-driven piston successively injecting fluid into a background jet flow. The swirl is generated by axial swirlers which are made by three-dimensional printing technology and mounted behind the nozzle. The swirl number S generated in the experiments ranges from 0 to 1.10, which covers the critical swirl number of a swirling jet. The stroke-to-nozzle diameter ratio L/d = 1.56 produces compact swirling vortex rings in a single pulsed jet without a background jet flow. Two pulsing frequencies (St = 0.16 and 0.32) that generate coherent vortex rings are investigated, with the free jet also measured at the same Re for comparison. The combination of vortex rings and swirling flows is found to enhance the turbulent fluctuation intensity; this effect is positively related to the compactness of the vortex rings (St) and central recirculation zone (S). At the early stage, the generated swirling vortex ring develops until it reaches its limit, which decreases as S increases but increases with St. The axial distance at which this limit is achieved decreases with both increasing S and St. Then, the ring decays and is eventually dissipated at a decay rate that grows larger in proportion to S and St. Moreover, the swirling vortex rings evolve at their corresponding constant axial and radial velocities in the near field. The axial velocity decreases as S increases and increases with St, while the radial velocity increases with S and is inde-pendent of St. In addition, the axial distance between two adjacent swirling vortex rings decreases with increased S and St. Furthermore, the temporal variation of the axial distance also decreases at higher S and St, indicating that the axial propagation velocity decreases downstream. Finally, detailed structures of the swirling vortex ring cores and the corresponding structures induced by the rolling-up process are presented.

Generation and Evolution Characteristics of the Mushroom-Like Vortex Generated by a Submerged Round Laminar Jet

Numerical Study on Flow Structure of a Shallow Laminar Round Jet

Experiments on Vortex Dipoles Generated by A Submerged Round Jet

Bubble Formation in a Swirl-Venturi Microbubble Generator

Numerical Simulations of Coherent Vortex Pairing in a Round Jet

Research on the particle dispersion in the particulate two-phase round jet

Numerical investigation of the round jet in crossflow at high velocity ratios with special emphasis on the evolution of vortex structures

Research on motion characteristics of gas-solid jet flow

A Numerical Study of Dynamics of A Temporally Evolving Swirling Jet

Stability and Temporal Evolution of A Swirling Jet with Centrifugally Unstable Azimuthal Velocity

Experiments on Evolution Characteristics of Momentum Wakes Generated by the Towed Sphere with a Horizontal Jet

Transient Energy Growth in a Free Cylindrical Liquid Jet

Scaling Vortex Breakdown Mechanism Based on Viscous Effect in Shock Cylindrical Bubble Interaction

Studies on Stability and Dynamics of a Swirling Jet

Swirling Instability of Coaxial Liquid Jet in Gas Surroundings

An Experimental Study of Coherent Swirling Vortex Rings in a Turbulent Pulsed Jet

Investigation on Spatial Evolutions of Two- and Three-Dimensional Modes in a Laminar Separation Bubble over a Low-Pressure Turbine Cascade

DNS Study of Swirling Intensity Effect on Flow Pattern of a Circular Jet

On the three-dimensional flow evolution of a submerged synthetic jet with two circular orifices

Vortex-ring-induced internal mixing upon the coalescence of initially stationary droplets

Experimental investigation on flow characteristics and instability of submerged high-speed gaseous jets under co-flow