On the research advances of the formation and control of the N-nitrosodimethylamine-disinfection by-product
Chao-qun TAN,Yi-jie ZHONG,Hua HUANG
DOI: https://doi.org/10.13637/j.issn.1009-6094.2017.06.048
2017-01-01
Abstract:This article intends to present a systematic summary research over the formation mechanism and principle from the dimethylamine (DMA) to NDMA,including the nitrosation pathway,UDMH pathway and Cl-UDMH pathway,with the N-nitrosodimethylamine (NDMA) being a new type of trace and carcinogenic disinfection by-products resulted from the purification of the drinking water.As a matter of fact,though the nitrosation pathway is slow in efficiency,it can be enhanced and made faster through the faster pathway form of NDMA.In addition,HOCl in the water,chloramine,the radiation of UV-A and O3 can all help to promote the approach,though it may have some side effects and a low yield rate.Moreover,it is also not the principal pathway to formulate the NDMA.As for the Cl-UDMH pathway,it has the highest yield rate of NDMA,and is well in accord with the facts of the actual application.Further analyses of NDMA precursors demonstrate that the PPCPs,the microbial metabolites,the water treatment reagents & materials,the pipeline accessory materials and the actual water body or bodies can all be made to come to the form of NDMA on the certain occasions.Among them,the actual water body contributes most to the formation of NDMA.Nonetheless,because of its complexity,it is difficult to analyze the actual water body's material composition bit by bit.Therefore,we have now mainly adopted the total nitrogen (TN) and small molecular weight content to estimate the formation potential of NDMA.So far as we know,it is possible to lower the NDMA concentration in the effluent under the certain conditions by using the following methods,such as the pre-control technology (pre-oxidation,physical adsorption),the process control methods (the process optimization) and the final treatment technology (physical interception,UV degradation,biodegradation and metal reduction).Furtherrmore,the NDMA precusors can all be effectively removed via the pre-control technology to prevent from the formation of NDMA in the subsequent processes,though it is rather difficult to bring the method to bring it into the production practice in the ordinary water purification plants.As to the final treatment technology,it is in a position to control NDMA in the drinking water treating plants,though the high cost of its water purification also limits the formation of NDMA in the pipe network.And,so,of all the available approaches,the process control technology has been made the focus of the research today due to itslow purification cost and easy operation without additional process.