Abstract:Maglev, offers competitive journey-times compared to the railway and subway systems in markets for which distance between the stations is 100-1600km owing to its high acceleration and speed; however, such systems may have excessive vibration. Field measurements of Maglev train-induced vibrations were therefore performed on the world's first commercial Maglev line in Shanghai, China. Seven test sections along the line were selected according to the operating conditions, covering speeds from 150 to 430km/h. Acceleration responses of bridge pier and nearby ground were measured in three directions and analyzed in both the time and frequency domain. The effects of Maglev train speed on vibrations of the bridge pier and ground were studied in terms of their peak accelerations. Attenuation of ground vibration was investigated up to 30m from the track centerline. Effects of guideway configuration were also analyzed based on the measurements through two different test sections with same train speed of 300km/h. The results showed that peak accelerations exhibited a strong correlation with both train speed and distance off the track. Guideway configuration had a significant effect on transverse vibration, but a weak impact on vertical and longitudinal vibrations of both bridge pier and ground. Statistics indicated that, contrary to the commonly accepted theory and experience, vertical vibration is not always dominant: transverse and longitudinal vibrations should also be considered, particularly near turns in the track. Moreover, measurements of ground vibration induced by traditional high-speed railway train were carried out with the same testing devices in Bengbu in the Anhui Province. Results showed that the Maglev train generates significantly different vibration signatures as compared to the traditional high-speed train. The results obtained from this paper can provide good insights on the impact of Maglev system on the urban environment and the quality of human life nearby.

Design of Electromagnetic Compatibility for Levitation Gap Sensor

Electromagnetic Analysis of Hybrid-Excitation Magnetic Levitation System for Low-speed Maglev Train

The EMC Design of the Gap Sensor beneath Middle/Low-velocity Maglev Train

Research on Levitation Gap Sensor for High Speed Maglev Train

Design of Measurement Coils Structures for Levitation Gap Sensor to Decrease Electromagnetic Interferences

Design and Optimization of Levitation Gap Sensors for High-speed Maglev trains

Design on Fault Detection for Levitation Gap Sensor of High Speed Maglev Train

Design and amelioration to prevent surge in sensors of the middle-low velocity maglev train

Some Research on Suspension Gap Sensor of High-Speed Maglev Train

The Engineering Design of Contactless Emergency Power Supply in Maglev

Electromagnetic field analysis and modeling of a relative position detection sensor for high speed maglev trains

Field measurements and analyses of environmental vibrations induced by high-speed Maglev

Study on Electromagnetic Radiation Characteristics Based on HTS Maglev Levitation Test Line

Optimal Design of Medium-and-low Speed Maglev Train Levitation Sensor for Small Radius Curve

Electromagnetic Susceptibility Analysis In Device Level With Numerical Technique Based On Electric Field Integral Equation

Investigation Of Electromagnetic Coupling Field Of Traction And Levitation Systems In High Speed Maglev Train

Design and realization of phase detection sensor for high speed maglev train

Research on Speed and Position Detection System of High Speed Maglev Train

Analysis of Hybrid Electromagnetic Field and Electromagnetic Forces Applied to Low-speed Maglev Train

Design of non‐contact capacitive displacement detection methods for magnetic levitated sphere

Design of Wireless Online Detection System for Gap Sensor of Maglev Train