Statistical Thermodynamics of Polymer Crystallization

Wenbing Hu

DOI: https://doi.org/10.1007/s11458-009-0110-z

2016-01-01

Abstract:A survey was made on the recent development of the mean-field lattice theory of polymer solutions to predict the properties of equilibrium melting points of bulk polymers. The interaction parameters were identified for several real polymers.

What problem does this paper attempt to address?

An Effective Temperature Theory for the Nonequilibrium Behavior of Amorphous Polymers

Rui Xiao,Thao D. Nguyen

DOI: https://doi.org/10.1016/j.jmps.2015.05.021

2015-01-01

Abstract:Amorphous polymers lack an organized microstructure, yet they exhibit structural evolution, where physical properties change with time, temperature, and inelastic deformation. To describe the influence of structural evolution on the mechanical behavior of amorphous polymers, we developed a thermomechanical theory that introduces the effective temperature as a thermodynamic state variable representing the nonequilibrium configurational structure. The theory couples the evolution of the effective temperature and internal state variables to describe the temperature-dependent and rate-dependent inelastic response through the glass transition. We applied the theory to model the effect of temperature, strain rate, aging time, and plastic pre-deformation on the uniaxial compression response and enthalpy change with temperature of an acrylate network. The results showed excellent agreement with experiments and demonstrate the ability of the effective temperature theory to explain the complex thermomechanical behavior of amorphous polymers.
Study on the Thermodynamics of Polymer Crystallization Based on Twin-Lattice Model.

Nuofei Jiang,Ping Tang,Hongdong Zhang,Yuliang Yang

DOI: https://doi.org/10.1021/acs.jpcb.8b05991

2019-01-01

Abstract:Polymer crystallization is the most important part in determining the performance of polymeric materials. The twin-lattice model originally provided by Lennard-Jones and Devonshire, developed by Pople and Karasz and other researchers, is extended for describing the thermodynamics of polymer crystallization. The positional order of segments and the orientational order of bonds are considered in this model. The free energy of polymers is obtained by further introducing the conformational energy and entropy, and thus a new parameter is defined, which is the ratio of conformational energy and positional diffusion energy. We studied two kinds of processes in polymer crystallization, including the process with plastic crystal phase and without any mesophases. The choice of crystallizing process is determined by the magnitude of lattice energy and conformational energy. The solid-solid transition from crystal to plastic crystal shows a significant dependence on the conformational energy. Considering data reliability, n-paraffins are chosen as the representation of polymers to compare the predictions of the model with experimental observations. We predict the number of carbons beyond which the rotator phase disappears, which is quite in agreement with the experiments. These calculations and results show this model can provide a new understanding to the crystallization of polymers.
Theory of Crystallization under Equilibrium Polymerization in a Solution and the Investigation of its Melting Properties

Sagar S. Rane,P. D. Gujrati

DOI: https://doi.org/10.48550/arXiv.cond-mat/0308436

2003-08-22

Abstract:We generalize a recently investigated lattice model of semiflexible polymers formed under equilibrium polymerization in a solution and conduct a comprehensive investigation of its melting properties. The model is characterized by six energies, three of which are for the interaction between the middle-group, the end-group and the solvent, and the remaining three represent energies for a gauche bond, a hairpin turn and a pair of neighboring parallel bonds. A polymer has two end-groups and at least one chemical bond. Two activities control the end-group and the middle-group densities, respectively, and give rise to polydisperse chains whose number is not fixed. We study the melting properties with various model parameters under conditions of fixed pressure, and compare our results with experimental data on fixed length and polydisperse polymers, whenever available. We investigate the effect of monomer interactions, nature of end-groups, chain rigidity, solvent quality, degree of polymerization, etc on the melting properties such as the melting temperature, latent heat, and energy and entropy of fusion. Our theory is thermodynamically consistent in the entire parameter space and improves upon the classical theories; hence our results should prove useful.

Condensed Matter
Multicomponent Thermodynamics of Strain-Induced Polymer Crystallization

Liyun Zha,Yixian Wu,Wenbing Hu

DOI: https://doi.org/10.1021/acs.jpcb.6b05404

2016-01-01

Abstract:We developed a linear combination of two Flory's melting-point theories, one for stretched and the other for solution polymers, to predict the melting point of stretched solution polymers. The dependences of the melting strains on varying temperatures, polymer volume fractions, and solvent qualities were verified by the onset strains of crystallization in our dynamic Monte Carlo simulations of stretched solution polymers under a constant strain rate. In addition, owing to phase separation before crystallization in a poor solvent, calibration of polymer concentration to the polymer-rich phase appears necessary for the verification. Our results set up a preliminary thermodynamic background for the investigation of the multicomponent effect on strain-induced crystallization of polymers in rubbers and gels as well as on shear-induced crystallization of polymers in solutions and blends.
The Melting Point of Chain Polymers

WB Hu

DOI: https://doi.org/10.1063/1.1288002

2000-01-01

Abstract:Based upon a consideration of the similarity in the driving force of polymer crystallization to the mesophase formation from the melt state, the equilibrium melting point of chain polymers relating to the details of molecular structure and the impure environment of crystallites was studied by classical lattice statistics and dynamic Monte Carlo simulations. The compact packing energy change of local chains during crystallization can be represented as an orientation-dependent attraction in the lattice model. The results as a function of driving force, chain length, content of random comonomers, and content of the diluent like small molecules or noncrystalline chains were compared with the semiempirical expressions that have been verified for several polymers. Good agreements were obtained. As a result, the classical lattice statistics can predict a disorder–order phase transition as well as a phase separation behavior in a mixture system containing polymers, and supply the thermodynamic background to explore details of these behaviors in computer simulations.
Statistical Thermodynamics of Polymer Solutions

I. Sanchez,R. Lacombe

DOI: https://doi.org/10.1021/MA60066A017

Abstract:The lattice fluid theory of solutions is used to calculate heats and volumes of mixing, lower critical solution temperatures, and the enthalpic and entropic components of the chemical potential. Results of these calculations are compared with literature data on several polyisobutylene solutions. In most instances the agreement with experiment is favorable and comparable to that obtained with the Flory equation of state theory. Several insights into polymer solution behavior are obtained and include: (1) differences in equation of state properties of the pure components make an unfavorable entropic contribution to the chemical potential that becomes large and dominant as the gas-liquid critical temperature of the solvent is approached; (2) limited miscibility of nonpolar polymer solutions at low and high temperatures is a manifestation of a polymer solution's small combinatorial entropy; and (3) negative heats of mixing in nonpolar polymer solutions are caused by the solvent's tendency to contract when polymer is added. Suggestions on how the theory can be improved are made Freeman and Rowlinson' in 1960 observed that several hydrocarbon polymers dissolved in hydrocarbon solvents phase separated at high temperatures. These nonpolar polymer solutions exhibited what are known as lower critical solution temperatures (LCST), a critical point phenomenon that is relatively rare among low molecular weight solutions. Soon after the discovery of the univ- ersality of LCST behavior in polymer solutions, Flory and co-~orkers~-~ developed a new theory of solutions which incorporated the "equation of state" properties of the pure components. This new theory of solutions, hereafter referred to as the Flory theory, demonstrated that mixture thermodynamic properties depend on the thermodynamic properties of the pure components and that LCST be- havior is related to the dissimilarity of the equation of state of properties of polymer and solvent. Patter~od-~ has also shown that LCST behavior is associated with differences in polymer/solvent properties by using the general cor- responding states theory of Prigogine and collaborators.1° Classical polymer solution theory, i.e., Flory-Huggins theory," which ignores the equation of state properties of the pure components, completely fails to describe the LCST behavior.

Chemistry,Materials Science
Thermodynamics of strain-induced crystallization of random copolymers.

Yijing Nie,Huanhuan Gao,Yixian Wu,Wenbing Hu

DOI: https://doi.org/10.1039/c3sm52465e

IF: 4.046

2014-01-01

Soft Matter

Abstract:Industrial semi-crystalline polymers contain various kinds of sequence defects, which behave like non-crystallizable comonomer units on random copolymers. We performed dynamic Monte Carlo simulations of strain-induced crystallization of random copolymers with various contents of comonomers at high temperatures. We observed that the onset strains of crystallization shift up with the increase of comonomer contents and temperatures. The behaviors can be predicted well by a combination of Flory's theories on the melting-point shifting-down of random copolymers and on the melting-point shifting-up of strain-induced crystallization. Our thermodynamic results are fundamentally important for us to understand the rubber strain-hardening, the plastic molding, the film stretching as well as the fiber spinning.
Kinetic Monte Carlo Simulations of Polymer Cold Crystallization

Cheng-Huan Xu,Ji-Ping Wang,Wen-Bing Hu

DOI: https://doi.org/10.1007/s10118-019-2222-3

2019-02-15

Chinese Journal of Polymer Science

Abstract:We performed kinetic Monte Carlo simulations of a lattice polymer model holding intramolecular and intermolecular activation barriers for polymer diffusion, on the basis of the previous dynamic Monte Carlo simulations of polymer crystallization. We explored the effective parameter sets for two barriers to freeze the amorphous polymers at low temperatures. The subsequent heating process of the frozen amorphous polymers exhibits clear cold crystallization behaviors. We made preliminary investigation on the crystallinity and the morphology of polymer crystallites yielded during the cold crystallization, which appear in consistence with our common experimental observations. Our present work paves the way for molecular simulations of hot and cold polymer crystallization in the whole temperature range between the glass transition temperature and the melting temperature.

polymer science
Thermodynamics of the Glassy Polymer State: Equilibrium and Non-Equilibrium Aspects

Costas Panayiotou

DOI: https://doi.org/10.3390/polym16020298

IF: 5

2024-01-22

Polymers

Abstract:This work examines, first, the non-equilibrium character of the glassy state of polymer systems and its significance in the development of novel materials for important technological applications. Subsequently, it summarizes the essentials of the generalized lattice fluid approach for the description of this highly complex non-equilibrium behavior with an approximate and simple, yet analytically powerful formalism. The working equations are derived in a straightforward and consistent manner by clearly defining the universal and specific variables needed to describe the discussed properties. The role of the non-random distribution of molecular species and free volume in the glassy system is also examined, as is the role of strong specific interactions, such as hydrogen-bonding networks. This work also reports examples of applications in a variety of representative systems, including glass densification, retrograde vitrification, increase in glass-transition temperature in hydrogen-bonded polymer mixtures, and hysteresis phenomena in sorption–desorption from glassy polymer matrices.

polymer science
Phase Transitions of Bulk Statistical Copolymers Studied by Dynamic Monte Carlo Simulations

Wenbing Hu,Vincent B. F. Mathot,Daan Frenkel

DOI: https://doi.org/10.1021/ma0213854

IF: 5.5

2003-01-01

Macromolecules

Abstract:We report a numerical study of crystallization and melting in bulk statistical homogeneous (random), homogeneous (slightly alternating), and heterogeneous (produced in a batch reaction) copolymers formed by crystallizable monomers and noncrystallizable comonomers. In our dynamic Monte Carlo simulations of lattice chains, the current model further assumes that the comonomers cannot move into crystalline regions by sliding diffusion of the chains. We find that both the overall composition and the statistical distribution of the monomers affect the phase-transition temperature, the resulting relative crystallinity, and the crystal morphology. However, the final absolute crystallinity of homogeneous copolymers seems insensitive to these parameters. Intramolecular segregation between monomers and comonomers is accompanied by crystallization, demonstrating the concept of sequence segregation or nanophase separation of statistical copolymers with assembling structures like in thermoplastic elastomers. Moreover, if crystallization of homogeneous copolymers has started but not yet completed on cooling, subsequent heating will show cold crystallization before melting, which can be attributed to insertion-mode lamellar growth. For heterogeneous copolymers, intermolecular segregation occurs on cooling before crystallization. On the basis of our observations, a pair of master melting and crystallization curves for the crystallinity of a statistical copolymer as a function of temperature are suggested to reflect the characteristic of the monomer-sequence-length distribution. This suggestion facilitates the clarification to the kinetic disturbance in local temperature regions and to the principle of some fractionation methods, such as temperature rising elution fractionation (TREF).
Polymer Crystallization Driven by Anisotropic Interactions

Wenbing Hu,Daan Frenkel

DOI: https://doi.org/10.1007/12_011

2005-01-01

Abstract:In this review, we consider a variety of aspects of polymer crystallization using a very simple lattice model. This model has three ingredients that give it the necessary flexibility to account for many features of polymer crystallization that have been observed experimentally. These ingredients are (1) a difference in attraction between neighboring (nonbonded) components, (2) attraction between parallel bonds, and (3) temperature-dependent flexibility due to the energy cost associated with kinks in the polymer chain. We consider this model using both dynamic Monte Carlo simulations and a simple mean-field theory. In particular, we focus on the interplay of polymer crystallization and liquid-liquid demixing in polymer solutions. In addition, we study the factors that are responsible for the characteristic crystal morphologies observed in a variety of homopolymer and statistical-copolymer crystals. Finally, we consider how the freezing of polymers in the bulk can be related to the crystallization of a single polymer chain.
Statistical Thermodynamics of Crystal Plasticity

J. S. Langer

DOI: https://doi.org/10.1007/s10955-019-02221-7

2019-01-17

Journal of Statistical Physics

Abstract:This article is written in memory of Pierre Hohenberg with appreciation for his deep commitment to the basic principles of theoretical physics. I summarize recent developments in the theory of dislocation-enabled deformation of crystalline solids. This topic is especially appropriate for the Journal of Statistical Physics because materials scientists, for decades, have asserted that statistical thermodynamics is not applicable to dislocations. By use of simple, first-principles analyses and comparisons with experimental data, I argue that these people have been wrong, and that this field should now be revitalized because of its wide-ranging intellectual and technological importance.

physics, mathematical
Polymer Immiscibility Enhanced by Thermal Fluctuations Toward Crystalline Order

Yu Ma,Wenbing Hu,Howard Wang

DOI: https://doi.org/10.1103/physreve.76.031801

2007-01-01

Abstract:We report dynamic Monte Carlo simulations of binary polymer blends. The blends exhibit liquid-liquid phase separation influenced by the nearby crystallization of one component. We found that both binodal and spinodal boundaries of liquid-liquid phase separation shift up above the predictions of the mean-field lattice theory. The enhancement of immiscibility can be assigned to the thermal fluctuations toward better parallel order of the crystallizable chains in the blends, which has been neglected in the mean-field theory. This result serves as a theoretical background to explain the related experimental observations.
Molecular thermodynamics of mixed-solvent polymer solutions

Honglai Liu,Jianyong Yang,Qin Xin,Ying Hu

DOI: https://doi.org/10.1016/j.fluid.2007.07.009

IF: 2.745

2007-01-01

Fluid Phase Equilibria

Abstract:Following our previous work, we developed a new lattice model for systems containing two solvents and a polymer chain. The chain length of solvent molecules is taken as 1, while that of the polymer is treated as r in the model. Comparison with Monte Carlo simulation data shows the great advantages of this model over the traditional Flory–Huggins theory and the revised Freed theory especially in the critical region. When applied to real systems, it is found that this model also exhibits notable practical value for the engineering application.
A Molecular Thermodynamic Model for Binary Lattice Polymer Solutions

CJ Peng,HL Liu,Y Hu

DOI: https://doi.org/10.1016/j.polymer.2006.05.009

IF: 4.6

2006-01-01

Polymer

Abstract:A molecular thermodynamic model for binary lattice polymer solutions with concise and accurate expressions for the Helmholtz energy of mixing and other thermodynamic properties is established. Computer simulation results are combined with the statistical mechanics to obtain the expressions. Yan et al.'s model for Ising lattice and the sticky-point model of Cumming, Zhou and Stell are incorporated in the derivation. Besides the nearest neighbor cavity correlation function obtained from the Ising lattice, the long range correlations beyond the close contact pairs are represented by a parameter λ, the linear chain-length dependence of which is obtained by fitting the simulated critical parameters of two systems with chain lengths of 4 and 200. The predicted critical temperatures and critical compositions, spinodals and coexistence curves as well as internal energies of mixing for systems with various chain lengths are in satisfactory agreement in comparison with the computer simulation results and experimental data indicating the superiority of the model over other theories. The model can serve as a basis to develop more efficient models for practical applications.
Personal Perspective on Strain-Induced Polymer Crystallization

Wenbing Hu

DOI: https://doi.org/10.1021/acs.jpcb.2c07085

2023-01-01

Abstract:Semicrystalline polymer materials are commonly strong yet tough after processed through fiber spinning, film stretching (or blowing), and plastic molding (or foaming), which are fundamentally related with strain-induced crystallization. This paper provides a personal perspective on thermodynamics and kinetics aspects of strain-induced polymer crystallization, mainly based on the author's recent research experience. The thermodynamic studies include homopolymers, random copolymers, solution polymers, and blend polymers. The kinetic studies cover three sequential crystallization stages, i.e., crystal nucleation, crystal growth, and postgrowth. The thermodynamic driving forces join with the kinetic barriers to determine the crystal nucleation mechanisms and the structure evolution at the molecular level, which yield unique polymer crystal morphologies from lamellar crystals to shish-kebab crystals and eventually fibril crystals. The resulting semicrystalline structures were discussed with their implications for the mechanical properties of products. Some future studies were briefly proposed.
Asymmetry in Polymer-Solvent Interactions Yields Complex Thermoresponsive Behavior

Satyen Dhamankar,Michael A Webb

DOI: https://doi.org/10.1021/acsmacrolett.4c00178

IF: 5.8

2024-06-15

ACS Macro Letters

Abstract:We introduce a lattice framework that incorporates elements of Flory-Huggins solution theory and the q-state Potts model to study the phase behavior of polymer solutions and single-chain conformational characteristics. Without empirically introducing temperature-dependent interaction parameters, standard Flory-Huggins theory describes systems that are either homogeneous across temperatures or exhibit upper critical solution temperatures. The proposed Flory-Huggins-Potts framework extends these...

polymer science
Lattice model study of the thermodynamic interplay of polymer crystallization and liquid-liquid demixing

Wenbing Hu,Daan Frenkel,Vincent B. F. Mathot

DOI: https://doi.org/10.1063/1.1572462

2003-04-03

Abstract:We report Monte Carlo simulations of a lattice-polymer model that can account for both polymer crystallization and liquid-liquid demixing in solutions of semiflexible homopolymers. In our model, neighboring polymer segments can have isotropic interactions that affect demixing, and anisotropic interactions that are responsible for freezing. However, our simulations show that the isotropic interactions also have a noticeable effect on the freezing curve, as do the anisotropic interactions on demixing. As the relative strength of the isotropic interactions is reduced, the liquid-liquid demixing transition disappears below the freezing curve. A simple, extended Flory-Huggins theory accounts quite well for the phase behavior observed in the simulations.

Soft Condensed Matter
A Review on Polymer Crystallization Theories

Michael C. Zhang,Bao-Hua Guo,Jun Xu

DOI: https://doi.org/10.3390/cryst7010004

IF: 2.7

2016-01-01

Crystals

Abstract:It is the aim of this article to review the major theories of polymer crystallization since up to now we still have not completely comprehended the underlying mechanism in a unified framework. A lack of paradigm is an indicator of immaturity of the field itself; thus, the fundamental issue of polymer crystallization remains unsolved. This paper provides an understanding of the basic hypothesis, as well as relevant physical implications and consequences of each theory without too much bias. We try to present the essential aspects of the major theories, and intuitive physical arguments over rigorously mathematical calculations are highlighted. In addition, a detailed comparison of various theories will be made in a logical and self-contained fashion. Our personal view of the existing theories is presented as well, aiming to inspire further open discussions. We expect that new theories based on the framework of kinetics with direct consideration of long-range multi-body correlation will help solve the remaining problems in the field of polymer crystallization.

Statistical Thermodynamics of Polymer Crystallization

An Effective Temperature Theory for the Nonequilibrium Behavior of Amorphous Polymers

Study on the Thermodynamics of Polymer Crystallization Based on Twin-Lattice Model.

Theory of Crystallization under Equilibrium Polymerization in a Solution and the Investigation of its Melting Properties

Multicomponent Thermodynamics of Strain-Induced Polymer Crystallization

The Melting Point of Chain Polymers

Statistical Thermodynamics of Polymer Solutions

Thermodynamics of strain-induced crystallization of random copolymers.

Kinetic Monte Carlo Simulations of Polymer Cold Crystallization

Thermodynamics of the Glassy Polymer State: Equilibrium and Non-Equilibrium Aspects

Phase Transitions of Bulk Statistical Copolymers Studied by Dynamic Monte Carlo Simulations

Polymer Crystallization Driven by Anisotropic Interactions

Statistical Thermodynamics of Crystal Plasticity

Polymer Immiscibility Enhanced by Thermal Fluctuations Toward Crystalline Order

Molecular thermodynamics of mixed-solvent polymer solutions

A Molecular Thermodynamic Model for Binary Lattice Polymer Solutions

Personal Perspective on Strain-Induced Polymer Crystallization

Asymmetry in Polymer-Solvent Interactions Yields Complex Thermoresponsive Behavior

Lattice model study of the thermodynamic interplay of polymer crystallization and liquid-liquid demixing

A Review on Polymer Crystallization Theories