Abstract:Purpose In a dual-robot system, the relative position error is a superposition of errors from each mono-robot, resulting in deteriorated coordination accuracy. This study aims to enhance relative accuracy of the dual-robot system through direct compensation of relative errors. To achieve this, a novel calibration-driven transfer learning method is proposed for relative error prediction in dual-robot systems. Design/methodology/approach A novel local product of exponential (POE) model with minimal parameters is proposed for error modeling. And a two-step method is presented to identify both geometric and nongeometric parameters for the mono-robots. Using the identified parameters, two calibrated models are established and combined as one dual-robot model, generating error data between the nominal and calibrated models’ outputs. Subsequently, the calibration-driven transfer, involving pretraining a neural network with sufficient generated error data and fine-tuning with a small measured data set, is introduced, enabling knowledge transfer and thereby obtaining a high-precision relative error predictor. Findings Experimental validation is conducted, and the results demonstrate that the proposed method has reduced the maximum and average relative errors by 45.1% and 30.6% compared with the calibrated model, yielding the values of 0.594 mm and 0.255 mm, respectively. Originality/value First, the proposed calibration-driven transfer method innovatively adopts the calibrated model as a data generator to address the issue of real data scarcity. It achieves high-accuracy relative error prediction with only a small measured data set, significantly enhancing error compensation efficiency. Second, the proposed local POE model achieves model minimality without the need for complex redundant parameter partitioning operations, ensuring stability and robustness in parameter identification.

Mobile robot's electronic compass calibration based on modified Fourier Neural Network.

A Robot Calibration Method Based on Joint Angle Division and an Artificial Neural Network

Error Compensation of Joint Angles Based on RBF Neural Networks

A Method for Predicting Relative Position Errors in Dual-Robot Systems Via Knowledge Transfer from Geometric and Nongeometric Calibration

Study on Nonlinear Error Calibration of Fiber Optical Gyroscope Scale Factor Based on LSTM

A rapid and low-cost north-finder design with error compensation

Towards Better Accuracy Calibration Method For Electronic Compass Based On Spatial Interpolation Algorithm

A Method for High Accuracy Heading Angle Combined with Ellipsoid Calibration and BP Neural Network

Two-step calibration method for three-axis magnetic sensor error based on particle swarm optimization

AModified Visual Compass Attitude Estimation Method

A novel calibration method of electronic compass based on multi-redundancy

A calibration method for enhancing robot accuracy through integration of an extended Kalman filter algorithm and an artificial neural network

Sampson-distance Based Ellipse Fitting for Calibration of Magnetic Compass Deviations

Kinematic and Nonparametric Calibration of a Parallel Machining Robot Based on an Artificial Neural Network

An indoor mobile robot navigation technique using odometry and electronic compass

Improvement of Heavy Load Robot Positioning Accuracy by Combining a Model-Based Identification for Geometric Parameters and an Optimized Neural Network for the Compensation of Nongeometric Errors

Nonlinear error calibration of three-axis magnetometer based on PSO algorithm

A Fast Magnetic Deviation Calibration Algorithm for Tri-Axial Electronic Compass

Compounded Calibration Based on FNN and Attitude Estimation Method Using Intelligent Filtering for Low Cost MEMS Sensor Application

Kinematic calibration of a 5-axis parallel machining robot based on dimensionless error mapping matrix

Robot Positioning Error Compensation Method Based on Deep Neural Network