A Survey on the Functionalization of Single-Walled Nanotubes. the Chemical Attachment of Phthalocyanine Moieties

G de la Torre,W Blau,T Torres

DOI: https://doi.org/10.1088/0957-4484/14/7/312

IF: 3.5

2003-01-01

Nanotechnology

Abstract:Single-walled nanotubes (SWNTs) covalently attached to phthalocyanine molecules through amide bonds have been prepared. A survey on the functionalization of SWNTs is also given.

What problem does this paper attempt to address?

Quantitative Non-Covalent Functionalization of Carbon Nanotubes

Anson Ma,Jun Lu,Shihe Yang,Ka Ming Ng

DOI: https://doi.org/10.1007/s10876-006-0076-7

2006-01-01

Journal of Cluster Science

Abstract:We report a convenient method for quantitative non-covalent functionalization of single-walled carbon nanotubes (SWNT) with phthalocyanine (Pc) compounds, in which a surface coverage of 49% was achieved. The effect of several process parameters on the functionalization process was elucidated. Firstly, as-produced SWNT gave the largest extent of functionalization compared with purified SWNT and as-produced multi-walled carbon nanotubes (MWNT). Secondly, the extent of functionalization was sensitive to the specific molecular structures of the Pc compounds. Finally, in terms of solvent selection, dimethylformamide (DMF) was found to give the largest extent of functionalization, which is then followed by chloroform (CHCl 3 ) and 1,2-dichlorobenzene (ODCB). The method reported in this paper provides new insights on the interactions between Pc molecules and carbon nanotubes and paves the way for rational control of the degree of functionalization, which is an important step from the perspective of carbon nanotube applications.
Synthesis of Multifunctional Charge Transfer Agents: Towards Single Walled Carbon Nanotubes with Defined Covalent Functionality and Preserved π System

Alphonse Fiebor,Antonio Setaro,Andreas J. Achazi,Georgy Gordeev,Manuela Weber,Daniel Franz,Beate Paulus,Mohsen Adeli,Stephanie Reich

DOI: https://doi.org/10.48550/arXiv.2109.00282

2021-09-01

Mesoscale and Nanoscale Physics

Abstract:The attachment of well-defined charge transfer agents to the surface of nanomaterials is an efficient strategy to control their charge density and also to tune their optical, electrical, and physicochemical properties. Particularly interesting are charge transfer agents that either donate or withdraw electrons depending on the arrangements of their building units and that promise a non-destructive attachment to delicate nanomaterials like sp$^2$ compounds. In this work, we rationally synthesize molecular moieties with versatile functionalities. A reactive anchor group allows to attach them to carbon nanotubes as defined charge transfer agents while preserving the tube $\pi$-conjugation. The charge transfer agents were synthesized through the stepwise nucleophilic substitution of either one (monosubstituted series) or two chlorine (disubstituted series) atoms of cyanuric chloride by aniline derivatives containing one, two or three methoxy groups in the para and meta positions. Variation in the number and position of methoxy as an electron transferring group help us to manipulate the electronic and optical properties of the molecular probes and their charge transfer to the SWNTs systematically. The correlation between the optical properties of these molecular probes and their functionality was investigated by experiments and quantum chemical calculations. While the optoelectronic properties of the conjugated charge transfer agents were dominated by the aniline segments, the triazine warrants the ability to nondestructively attach to the surface of SWNTs. This study is one step ahead towards the production of SWNTs with desired optical and electrical properties by covalent $\pi$-preserving functionalization.
Use of Functionalized Carbon Nanotubes for Covalent Attachment of Nanotubes to Silicon

James M. Tour,Christopher A. Dyke,Francisco Maya,Michael Stewart,Bin Chen,Austen K. Flatt

2012-01-01

Abstract:The purpose of the invention is to covalently attach functionalized carbon nanotubes to silicon. This step allows for the introduction of carbon nanotubes onto all manner of silicon surfaces, and thereby introduction of carbon nano - tubes covalently into silicon-based devices, onto silicon particles, and onto silicon surfaces. Single-walled carbon nanotubes (SWNTs) dispersed as individuals in surfactant were functionalized. The nano - tube was first treated with 4-t-butylbenzenediazonium tetrafluoroborate to give increased solubility to the carbon nanotube; the second group attached to the sidewall of the nanotube has a silyl-protected terminal alkyne that is de-protected in situ. This gives a soluble carbon nanotube that has functional groups appended to the sidewall that can be attached covalently to silicon. This reaction was monitored by UV/vis/NJR to assure direct covalent functionalization.
Stepwise Functionalization of Single-Walled Carbon Nanotubes with Subsequent Molecular Conversion to Control Photoluminescence Properties

Yui Konno,Michio Yamada,Mitsuaki Suzuki,Yutaka Maeda

DOI: https://doi.org/10.1002/chem.202301707

2023-09-12

Chemistry

Abstract:Functionalization of single-walled carbon nanotubes (SWCNTs) has attracted interest because it alters the near-infrared (NIR) photoluminescence (PL) wavelength and emission efficiency. These modifications depend on the binding configuration and degree of functionalization. Excessive functionalization reduces the emission efficiency as the integrity of the conjugated π system decreases; thus, controlling the degree of functionalization is essential. Because the binding configurations and degree of functionalization are affected by the reagent structure, a stepwise approach combining SWCNTs functionalization and subsequent reactions to introduce functional groups into the addenda could effectively control their PL properties and functionalities. We studied this approach by implementing the reductive alkylation of SWCNTs by using bromoalkanes with t-butyl carbamate (Boc)-protected amino groups and subsequent deprotection and amidation reactions. The reaction products were analyzed based on absorption, PL, and Raman spectroscopy and the Kaiser test. Depending on the structure of the reagent, deprotection and amidation reactions competed with the elimination reaction of addenda, altering the PL properties of the SWCNTs. Furthermore, the elimination reaction was inhibited in the adducts functionalized using dibromoalkane with Boc-protected amino groups, demonstrating that the use of appropriate reagents enables the molecular conversion of the functional groups of SWCNT adducts without affecting their PL properties.
The study of synthesis and functionalized single-walled carbon nanotubes with amide group

Reza Abjameh,Omid Moradi,Javad Amani

DOI: https://doi.org/10.1007/s40089-014-0097-4

IF: 3.7

2014-06-01

International Nano Letters

Abstract:This study includes of syntheses and characteristics functionalized single-walled carbon nanotubes (SWCNTs) with amide group using thionyl chloride and NH3. First SWCNTs in H2SO4 and HNO3, solved and the solution obtained ultrasound was to reach the equilibrium temperature to functionalization of carboxylate single-walled carbon nanotubes (SWCNT-COOH). Then using thionyl chloride with (SOCl2) and DMF the mixture was refluxing. SWCNT-COCl was obtained from the previous step with ammonia (NH3), and DMF as solvent, and the mixture was refluxing. The black solid obtained was placed overnight in the oven to dry. Carbon nanotubes were expected at this stage to have a functional group CONH2. All new chemical bonding products were identified by FT-IR and observations using scanning electron microscopy (SEM) were confirmed. SWCNT-COOH functionalized carbon nanotubes have a relatively smooth surface and thin Stowe and the SEM image of the SWCNT-NH2; a thin layer of hope is clearly placed on the surface of SWCNT-COOH and its diameter is increased.
Advanced Technology for Functionalization of Carbon Nanotubes

Lingjie Meng,Chuanlong Fu,Qinghua Lu

DOI: https://doi.org/10.1016/j.pnsc.2008.08.011

IF: 4.269

2009-01-01

Progress in Natural Science Materials International

Abstract:Functionalization of carbon nanotubes （CNTs） has attracted considerable interest in the fields of physics, chemistry, material science and biology. The functionalized CNTs exhibit improved properties enabling facile fabrication of novel nanomaterials and nanodevices.Most of the functionalization approaches developed at present could be categorized into the covalent attachment of functional groups and the non-covalent adsorption of various functional molecules onto the surface of CNTs. This review highlights recent development and our work in functionalization of carbon nanotubes, leading to biocompatible CNTs, fluorescent CNTs and transition metal functionalized CNTs. These novel methods possess advantages such as simplified technical procedures and reduced cost of novel nanomaterials and nanodevices fabrication.
Thionine-mediated Chemistry of Carbon Nanotubes

QW Li,J Zhang,H Yan,MS He,ZF Liu

DOI: https://doi.org/10.1016/j.carbon.2003.10.030

IF: 10.9

2004-01-01

Carbon

Abstract:Thionine can be employed as a kind of useful functional molecule for the non-covalent functionalization of carbon nanotubes, as it shows a strong interaction with either SWNTs or MWNTs. Attachment of thionine molecules onto the sidewalls of carbon nanotubes would improve the solubility and lower the thermal stability of original carbon nanotubes. More importantly, it may functionalize the surface of carbon nanotubes with rich NH2 groups and therefore open up more opportunities for the surface chemistry of carbon nanotubes. It has been proved that through the modification of small thionine molecules, other kinds of species such as cytochrome C and TiO2 nanoparticles could be easily and selectively introduced onto the surface of carbon nanotubes. With this approach, SWNTs or MWNTs can be tailored with desired functional structures and properties.
SOLUBILITY IMPROVEMENT AND SURFACE FUNCTIONALIZATION OF MULTI-WALLED CARBON NANOTUBES BY A THIOL-FUNCTIONALIZED POLY(PHENYLACETYLENE) DERIVATIVE

Xu Haipeng,Mao Yu,Yuan Wangzhang,Sun Jingzhi,Dong Yongqiang,Wang Mang,Tang Benzhong

DOI: https://doi.org/10.3724/sp.j.1105.2007.00897

2009-01-01

Acta Polymerica Sinica

Abstract:A thiol-functionalized poly (phenylacetylene) has been synthesized and characterized. The disappearance of the characteristic vibrations at 3312 and 776 cm(-1) (C=C-H) and 2106 cm(-1) (C=C), together with the vanishing of the chemical shifts at 3.0 (C=C-H) and the appearance of the chemical shifts at 6.4 (C=C-H) indicate the polymerization of the thiol-containing monomer. The hybrid of thiol-functionalized poly(phenylacetylene) and multiwalled carbon nanotubes (MWNTs) showed good solubility in organic solvents. Meanwhile,the wrapping of the polymer chains on MWNTs led to the surface functionalization. By aid of the interactions between thiol groups and zinc cations, ZnO nanoparticles were assembled onto out-shells of the hybrids. These results suggested a novel route to the fabrication of multi-component nanostructures.
Functionalization of Single-Wall Carbon Nanotubes with Chromophores of Opposite Internal Dipole Orientation

Yuanchun Zhao,Changshui Huang,Myungwoong Kim,Bryan M. Wong,François Léonard,Padma Gopalan,Mark A. Eriksson

DOI: https://doi.org/10.1021/am4024753

2013-12-22

Abstract:We report the functionalization of carbon nanotubes with two azobenzene-based chromophores with large internal dipole moments and opposite dipole orientations. The molecules are attached to the nanotubes non-covalently via a pyrene tether. A combination of characterization techniques shows uniform molecular coverage on the nanotubes, with minimal aggregation of excess chromophores on the substrate. The large on/off ratios and the sub-threshold swings of the nanotube-based field-effect transistors (FETs) are preserved after functionalization, and different shifts in threshold voltage are observed for each chromophore. Ab initio calculations verify the properties of the synthesized chromophores and indicate very small charge transfer, confirming a strong, non-covalent functionalization.

Mesoscale and Nanoscale Physics,Materials Science,Chemical Physics
Fluorescent Chromophore Functionalized Single-Wall Carbon Nanotubes with Minimal Alteration to Their Characteristic One-Dimensional Electronic States

WH Zhu,N Minami,S Kazaoui,Y Kim

DOI: https://doi.org/10.1039/b303885h

2003-01-01

Journal of Materials Chemistry

Abstract:Soluble, chromophore-functionalized SWNTs (SWNT-NA) have been synthesized via covalent bonding with minimal alteration to the characteristic one-dimensional electronic states of SWNTs. The key step in the molecular design includes incorporating a naphthalimide fluorescent moiety onto SWNTs via the amidation of oxidatively etched SWNTs, where the solubility of the product is brought about by N-octadecyl groups that are attached to naphthalimide. SWNT-NA can be fabricated into in-plane aligned thin films by using the Langmuir-Blodgett (LB) method. The surface pressure-area isotherm is characterized by a steep rise in pressure as well as by a high collapse pressure (up to 40 mN m(-1)), which indicates that SWNT-NA possesses a good surface spreading property at the air/water interface. The polarized UV-Vis-NIR absorption spectrum of an SWNT-NA LB film (40 layers) by vertical dipping indicates a dichroic ratio of 2.42 at 1340 nm and AFM images show that tubes are preferentially aligned in the dipping direction. Electronic properties of the product were investigated by absorption and luminescence (steady-state and transient) spectroscopy. Fluorescence from the naphthalimide moiety is found to be significantly quenched when bonded to the SWNT backbones.
Functionalization of single-walled carbon nanotubes with Prussian blue

Yuanjian Zhang,Yi Wen,Yang Liu,Di Li,Jinghong Li

DOI: https://doi.org/10.1016/j.elecom.2004.09.016

IF: 5.443

2004-01-01

Electrochemistry Communications

Abstract:Chemical functionalization of single-walled carbon nanotubes (SWNTs) has constructed plenty of new structures with ample new properties into them. But the modification was often confined to organic molecules, either by covalence or non-covalence. In this report, SWNTs were successfully functionalized with one kind of electroactive inorganic compounds: Prussian blue (PB). And the molecular interactions between them were firstly investigated. Interestedly, π–π stacking interaction coupled with ionic interaction was found between SWNTs and PB. The electrochemical properties of SWNTs–PB were also investigated. It would pave a new pathway to manipulate molecular entities of SWNTs by cooperation with functional inorganic electroactive compounds.
Advances In Structure Modification Of Single Wall Carbon Nanotubes

Weihong Zhu,Shiqin Zhu,He Tian

DOI: https://doi.org/10.3321/j.issn:0253-2786.2002.12.005

2002-01-01

Chinese Journal of Organic Chemistry

Abstract:Single wall carbon nanotubes (SWNTs) have attracted considerable interest because of their unique electronic, mechanical and structural characteristics, which provide strong applicability to new functional devices. However, SWNTs are insoluble in water and common organic solvents, thus making them difficult to explore and understand the properties. With the great development of the preparation of SWNTs, it is necessary to bring about the structure functionalization of the basic structure. This paper is mostly concerned on the advances in recent studies on the structure modification of SWNTs, especially highlighting the chemical functionalization and physical adsorption.
Covalent Sidewall Functionalization of Single-Walled Carbon Nanotubes: a Photoreduction Approach.

Liangming Wei,Yafei Zhang

DOI: https://doi.org/10.1088/0957-4484/18/49/495703

IF: 3.5

2007-01-01

Nanotechnology

Abstract:Covalent sidewall functionalization of single-walled carbon nanotubes (SWNTs) via photoreduction of aromatic ketones by alcohols is reported for the first time. Irradiation of benzophenone, benzhydrol and SWNTs in benzene resulted in covalent attachment of benzhydrol to the sidewalls of the SWNTs. A variety of tools were used to characterize the functionalized SWNTs. Raman scattering, UV–visible and near-IR spectroscopy confirm the covalent nature of the sidewall functionalization. Attenuated total reflection (ATR) FTIR and NMR provided evidence for attachment of benzhydrol onto the sidewalls of nanotubes. Thermogravimetric analysis (TGA) showed that the degree of functionalization was about one benzhydrol in 52 sidewall carbons. A long-chain hydrocarbon marker (n-C18H35) was also grafted onto the functional groups by esterification reaction for high-resolution TEM (HRTEM) visualization.
Functionalization of carbon naotubes for nanoparticle attachment

yangqiao liu,lian gao,jing sun,yan wang,superfine microstructures

2010-01-01

Journal of Ceramic Processing Research

Abstract:In this paper, multiwalled carbon nanotubes (MWNTs) have been functionalized by two methods, which are a concentrated acid treatment and a noncovalent treatment by a polyelectrolyte. The structure of the carbon nanotubes after treatment has been characterized by Raman measurements. Zeta potential analysis shows that the carbon nanotubes become obviously negatively charged after these two treatments. Inorganic nanoparticles, including NiFe2O4, CdS and SnO2 are homogeneously attached onto the functionalized MWCNTs using an in situ formation method utilizing the electrical attraction between the functionalized MWCNTs and the metal ions. The composites obtained have been characterized by transmission electron microscopy (TEM) and energy dispersive spectroscopic (EDS) analysis. These composites can be potentially useful for fabricating catalysts, photovoltaic cells, light-emitting diodes, etc..
Synthesis of water-soluble phosphonate functionalized single-walled carbon nanotubes and their applications in biosensing

Pan Li,Hailing Liu,Yu Ding,Yì Wáng,Yu Chen,Yiming Zhou,Yawen Tang,Haiyan Wei,Chenxin Cai,Tianhong Lü

DOI: https://doi.org/10.1039/c2jm31350b

2012-01-01

Journal of Materials Chemistry

Abstract:A facile noncovalent approach is proposed to graft phosphonate groups onto the surface of single-walled carbon nanotubes (SWNTs) by pi-pi stacking interactions between naphthalen-1-ylmethylphosphonic acid (NYPA) and SWNTs. Ultraviolet-visible (UV-vis) spectroscopy, fluorescence spectroscopy, X-ray photoelectron spectroscopy (XPS), fourier transform infrared (FT-IR) spectroscopy and zeta potential analysis confirm the phosphonate groups noncovalently attach on the SWNTs surface, in accordance with the prediction of molecular dynamics (MD) simulations. The phosphonate functionalized SWNTs have good solubility in polar solvent due to the big electrostatic repulsion between phosphonate groups, the strong hydration force of phosphonate groups and the partial debundling of SWNTs. X-ray diffraction (XRD) and Raman spectroscopy measurements demonstrate the water-soluble phosphonate functionalized SWNTs almost completely preserve the electronic and structural integrity of the pristine SWNTs. Meanwhile, the as-prepared phosphonate functionalized SWNTs show good biocompatibility for protein immobilization. Consequently, myoglobin (Mb) proteins immobilized on the phosphonate functionalized SWNTs show excellent bioelectrocatalytic activity towards the reduction of hydrogen peroxide due to the exciting electronic properties of the phosphonate functionalized SWNTs and the fast electron transfer rate of Mb.
Triphenylphosphine Oxide: A Versatile Covalent Functionality for Carbon Nanotubes

Yanlin Pan,Dominika Baster,Daniel Käch,Jan Reger,Lionel Wettstein,Frank Krumeich,Mario El Kazzi,Máté J Bezdek

DOI: https://doi.org/10.1002/anie.202412084

2024-11-11

Abstract:Broadening the scope of functionalities that can be covalently bound to single-walled carbon nanotubes (SWCNTs) is crucial for enhancing the versatility of this promising nanomaterial class in applied settings. Here we report the covalent linkage of triphenylphosphine oxide [Ph3P(O)] to SWCNTs, a hitherto overlooked surface functionality. We detail the synthesis and structural characterization of a new family of phosphine oxide-functionalized diaryliodonium salts that can facilitate direct Ph3P(O) transfer and afford novel SWCNTs with tunable Ph3P(O) content (SWCNT-P). The molecularly-distributed and robust nature of the covalent Ph3P(O) attachment in SWCNT-P was supported by a combination of characterization methods including Raman, infrared, UV/Vis-NIR and X-ray photoelectron spectroscopies coupled with thermogravimetric analysis. Electron microscopy further revealed the effectiveness of the Ph3P(O) moiety for de-bundling SWCNTs to yield SWCNT-P with superior dispersibility and processability. Finally, electrochemical studies established that SWCNT-P is sensitive to the presence of Li+, Na+ and K+ wherein the Gutmann-Beckett Lewis acidity parameters of the ions were quantitatively transduced by Ph3P(O) to electrochemical responses. This work hence presents a synthetic, structural, spectroscopic and electrochemical foundation for a new phosphorus-enriched responsive nanomaterial platform featuring the Ph3P(O) functionality.
A New Approach to the Functionalization of Single-Walled Carbon Nanotubes with Both Alkyl and Carboxyl Groups

SM Chen,WM Shen,GZ Wu,DY Chen,M Jiang

DOI: https://doi.org/10.1016/j.cplett.2004.12.035

IF: 2.719

2005-01-01

Chemical Physics Letters

Abstract:Treating single-walled carbon nanotubes (SWNTs) with sec-butyllithium and subsequently with carbon dioxide leads to the SWNTs functionalized with both alkyl and carboxyl groups (named as c-a-SWNTs for simplicity). The resultant c-a-SWNTs are largely with lengths between 100 and 200 nm, which can be individually dispersed in water at the concentration of 0.5 mg/mL and the solution is nearly transparent. Zeta potentiometric titration indicates that c-a-SWNTs have a feature similar to a zwitterionic polyelectrolyte.
Chemical functionalization of carbon nanotubes by carboxyl groups on stone-wales defects: a density functional theory study.

Chenchen Wang,Gang Zhou,Haitao Liu,Jian Wu,Yong Qiu,Bing-Lin Gu,Wenhui Duan

DOI: https://doi.org/10.1021/jp060412f

2006-01-01

Abstract:Chemical functionalization of carbon nanotubes with Stone-Wales ( SW) defects by carboxyl ( COOH) groups is investigated by density functional calculations. Due to the localized donor states induced by the SW defect, the binding of the COOH group with the defective carbon nanotube is stronger than that with the perfect one. A quasi-tetrahedral bonding configuration of carbon atoms, indicating sp(3) hybrid bonding, is formed in the adsorption site. The charge distribution analysis shows that, in comparison with benzoic acid, the localized or delocalized pi states on the nanotube would affect the polarities of chemical bonds of the COOH group without losing the acidity. Furthermore, it is found that the double-adsorption system ( two COOH groups are respectively adsorbed on two individual carbon atoms of the SW defect) is more energetically favorable than the monoadsorption one. The adsorption of COOH groups leads to a significant change of the electronic states around the Fermi level, which is advantageous for the electrical conductivity. The functionalization by introducing functional groups on the topological defects provides a pathway for applications of carbon nanotubes in chemical sensors and nanobioelectronics.
Covalent Functionalization of Carbon Nanotube by Tetrasubtituted Amino Manganese Phthalocyanine

ZL Yang,HZ Chen,L Cao,HY Li,M Wang

2004-01-01

Abstract:The multiwall carbon nanotube （MWCNT） bonded to 2, 9, 16, 23-tetraamino manganese phthalocyanine （TAMnPc） was obtained by covalent functionalization, and its chemical structure was characterized by TEM. The photoconductivity of single-layered photoreceptors, where MWCNT bonded by TAMnPc （MWCNT-b-TAMnPc） served as the charge generation material （CGM）, was also studied.
Side-Wall Functionalization of Single-Walled Carbon Nanotubes with 4-Hydroxymethylaniline Followed by Polymerization of ε-Caprolactone

Fabian Buffa,Hui Hu,Daniel E. Resasco

DOI: https://doi.org/10.1021/ma050876w

IF: 5.5

2005-09-03

Macromolecules

Abstract:Nanotube functionalization with 4-hydroxymethylaniline (HMA) via the diazonium salt method has been done on SWNT produced by the CoMoCAT process. Thermal analysis indicates 1 out of every 33 C atoms remains functionalized. Raman, FTIR, and optical absorption spectroscopy confirm the side-wall functionalization and show that it can be reversed by thermolysis. The OH group that is generated from the functionalization was used to start the ring-opening polymerization of ε-caprolactone. The polymer thus produced (PCL) remains grafted to the nanotube as demonstrated by FTIR and a dramatic increase in suspendibility in chloroform. By combining several techniques (TGA, TPD, and TPO) a quantification of the number of polymer chains attached to the nanotube and their average length has been attempted.

polymer science

A Survey on the Functionalization of Single-Walled Nanotubes. the Chemical Attachment of Phthalocyanine Moieties

Quantitative Non-Covalent Functionalization of Carbon Nanotubes

Synthesis of Multifunctional Charge Transfer Agents: Towards Single Walled Carbon Nanotubes with Defined Covalent Functionality and Preserved π System

Use of Functionalized Carbon Nanotubes for Covalent Attachment of Nanotubes to Silicon

Stepwise Functionalization of Single-Walled Carbon Nanotubes with Subsequent Molecular Conversion to Control Photoluminescence Properties

The study of synthesis and functionalized single-walled carbon nanotubes with amide group

Advanced Technology for Functionalization of Carbon Nanotubes

Thionine-mediated Chemistry of Carbon Nanotubes

SOLUBILITY IMPROVEMENT AND SURFACE FUNCTIONALIZATION OF MULTI-WALLED CARBON NANOTUBES BY A THIOL-FUNCTIONALIZED POLY(PHENYLACETYLENE) DERIVATIVE

Functionalization of Single-Wall Carbon Nanotubes with Chromophores of Opposite Internal Dipole Orientation

Fluorescent Chromophore Functionalized Single-Wall Carbon Nanotubes with Minimal Alteration to Their Characteristic One-Dimensional Electronic States

Functionalization of single-walled carbon nanotubes with Prussian blue

Advances In Structure Modification Of Single Wall Carbon Nanotubes

Covalent Sidewall Functionalization of Single-Walled Carbon Nanotubes: a Photoreduction Approach.

Functionalization of carbon naotubes for nanoparticle attachment

Synthesis of water-soluble phosphonate functionalized single-walled carbon nanotubes and their applications in biosensing

Triphenylphosphine Oxide: A Versatile Covalent Functionality for Carbon Nanotubes

A New Approach to the Functionalization of Single-Walled Carbon Nanotubes with Both Alkyl and Carboxyl Groups

Chemical functionalization of carbon nanotubes by carboxyl groups on stone-wales defects: a density functional theory study.

Covalent Functionalization of Carbon Nanotube by Tetrasubtituted Amino Manganese Phthalocyanine

Side-Wall Functionalization of Single-Walled Carbon Nanotubes with 4-Hydroxymethylaniline Followed by Polymerization of ε-Caprolactone