Abstract:A series of silica-supported metal phosphides was prepared by two methods involving the reduction of phosphite (I) or phosphate (A) precursors and was studied for the hydrodeoxygenation (HDO) of 2-methyltetrahydrofuran (2-MTHF). The I method required lower temperature than the A method and resulted in catalysts with higher surface area. The activity was evaluated in a packed-bed reactor on the basis of equal CO chemisorption sites (30μmol) loaded in the reactor with comparison made to a commercial Pd/Al2O3 catalyst. At 300°C and 1atm, the order of activity was Ni2P>WP>MoP>CoP>FeP>Pd/Al2O3. The principal HDO products for the iron group phosphides (Ni2P and CoP) were pentane and butane, whereas for the group 6 metal phosphides (MoP and WP), the products were mostly pentenes and pentadienes. For the Pd/Al2O3 and the low-activity FeP/SiO2 catalyst the products were mostly pentenes and C4 mixtures. There were no significant differences in the turnover frequency between materials prepared by the two methods, except possibly for the case of WP. There were likewise no great changes in selectivity toward HDO products at 5% total conversion, except for WP. The differences in the case of WP were attributed to the surface P/W ratio that X-ray photoelectron spectroscopy (XPS) showed to be twice as large for the I method than the A method. Contact-time studies were used to develop reaction networks for the most active catalysts, Ni2P/SiO2 and WP/SiO2. For Ni2P/SiO2 by both methods, the selectivity profiles were similar and could be explained by a rake mechanism with pentenes as primary products, 2-pentanone as a secondary product, and pentane as a final product. In contrast, for WP/SiO2, the selectivity depended greatly on the preparation method, but produced a preponderance of unsaturated compounds. The results could be explained from the surface composition.

Hydrodeoxygenation of guaiacol as model compound for pyrolysis oil on transition metal phosphide hydroprocessing catalysts

Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Hydrodeoxygenation of Guaiacol over Carbon‐Supported Metal Catalysts

Hydrodeoxygenation of guaiacol as a model compound of pyrolysis lignin-oil over NiCo bimetallic catalyst: Reactivity and kinetic study

Selective Hydrodeoxygenation of Guaiacol to Phenolics over Activated Carbon Supported Molybdenum Catalysts

Selective Hydrodeoxygenation of Guaiacol to Cyclohexane over Ru-Catalysts Based on MFI Nanosheets

Hydrodeoxygenation of guaiacol over physically mixed Co/TiO2 and WO3/TiO2 catalysts

The selective hydrodeoxygenation of guaiacol to cyclohexanol over cobalt-modified TS-1 catalysts

Guaiacol to Aromatics: Efficient Transformation over In Situ-Generated Molybdenum and Tungsten Oxides

Catalytic Hydrodeoxygenation of Guaiacol over Palladium Catalyst on Different Titania Supports

Hydrodeoxygenation of mixtures of biomass-derived model compound oxygenates over Pt/HY catalysts

Guaiacol hydrodeoxygenation over Pd catalyst with mesoporous ZSM-5 support synthesized by solid-state crystallization

Gas-phase hydrodeoxygenation of bio-oil model compound over nitrogen-doped carbon-supported palladium catalyst

Tio2-Modified Pd/Sio2 for Catalytic Hydrodeoxygenation of Guaiacol

Hydrogen source controlled hydrodeoxygenation of phenolic compounds to cycloalkanes/cycloalkanols over NiFeAlO x catalysts

Production of Phenol and Cresol from Guaiacol on Nickel Phosphide Catalysts Supported on Acidic Supports

Hydrogen source controlled hydrodeoxygenation of phenolic compounds to cycloalkanes/cycloalkanols over NiFeAlOx catalysts

Catalytic Hydrodeoxygenation of Guaiacol to Cyclohexanol over Bimetallic NiMo-MOF-Derived Catalysts

Studies of the Synthesis of Transition Metal Phosphides and Their Activity in the Hydrodeoxygenation of a Biofuel Model Compound

Hydrodeoxygenation of Guaiacol to Aromatic Hydrocarbons over Mo2C Prepared in Nonthermal Plasma

Gas-phase catalytic hydrodeoxygenation of phenolic compounds derived from lignin pyrolysis for hydrocarbon production using Ni@HZSM-5-γ-Al2O3