Abstract:The analysis of the vibration responses of a fruit is suggested to measure firmness non-destructively. A wooden ball excited the fruits and the response signals were captured using an accelerometer sensor. The method has been well studied and understood on ellipsoidal shaped fruit (watermelon). In this work, using the finite element simulations, the applicability of the method on watermelon was investigated. The firnmess index is dependent on the mass, density, and natural frequency of the lowest spherical modes (under free boundary conditions). This developed index extends the firmness estimation for fruits or vegetables from a spherical to an ellipsoidal shape. The mode of Finite element analysis (FEA) of watermelon was generated based on measured geometry, and it can be served as a theoretical reference for predicting the modal characteristics as a function of design parameters such as material, geometrical, and physical properties. It was found that there were four types of mode shapes. The 1(st) one was first-type longitudinal mode, the 2(nd) one was the second-type longitudinal mode, the 3(rd) one was breathing mode or pure compression mode, and the fourth was flexural or torsional mode shape. As suggested in many references, the First-type spherical vibration mode or oblate Prolate for watermelon is the lowest bending modes, it's most likely related to fruit firmness. Comparisons of finite element and experimental modal parameters show that both results were agreed in mode shape as well as natural frequencies. In order to measure the vibration signal of the mode, excitation and sensors should be placed on the watermelon surface far away from the nodal lines. The excitation and the response sensors should be in accordance with vibration directions The correlations between the natural frequency and firnmess was 0.856, natural frequency and Young's modulus was 0.800, and the natural frequency and stiffhess factor (SF) was 0.862. The stiffness factor (SF) is adequate expression for the Modulus of Elastic (MOE), and adopted in the evaluation of their firnmess.

The Firmness Detection by Excitation Dynamic Characteristics for Peach

Firmness Evaluation by Drop Impact Characteristics for Peach

Pear dynamic characteristics and firmness detection

Firmness Measurement of Peach by Impact Force Response

Firmness Measurement of Kiwifruit Using a Self-Designed Device Based on Acoustic Vibration Technology

Evaluation Of Pear Firmness By Dynamic Characterictics Of Drop Impact

Acoustic Testing for Peach Fruit Ripeness Evaluation During Peach Storage Stage

The Steady-state Sinusoidal Dynamic Behaviour of Peach and Pear

Laser Doppler Vibrometer Enables In-Situ Monitoring of Peach Firmness

Firmness Evaluation of Melon Using Its Vibration Characteristic and Finite Element Analysis

Nondestructive Detection of Pear Firmness Using a Laser Doppler Vibrometer

Dynamic Characteristics of Intact Pear

Analysis of Pear Dynamic Characteristics Based on Harmonic Response

Assessing Peach Firmness by Multi-Spectral Scattering

Acoustic Impulse Response For Measuring The Firmness Of Mandarin During Storage

Firmness of Mandarin at Different Picking Dates

Visuo-tactile Sensor Development and Its Application for Non-Destructive Measurement of Peach Firmness

Effects of Changes in Pectin Constitution on Optical Properties and Firmness of Peach Flesh during Storage

Impulse response of pear fruit and its relation to Magness-Taylor firmness during storage

Determination of Acoustic Vibration in Watermelon by Finite Element Modeling

Studies on Vibration Characteristics of a Pear Using Finite Element Method