Abstract:The surface roughness of ITO and PEDOT:PSS on ITO was measured by atomic force microscopy (AFM) and conductive atomic force microscopy (C‐AFM). The conductive current level of PEDOT:PSS is much lower than that of ITO. The spin‐coated PEDOT:PSS can improve the flatness of the ITO surface, reduce leakage current, and successfully improve the phenomenon of OLED burning when voltage applied. In this study, the PEDOT:PSS conductive polymer material was spin‐coated on the ITO surface to improve the surface roughness of the ITO and reduce the spikes on the ITO surface, so as to avoid the burning spots generated in the green organic light emitting diode (OLED) when the voltage was applied to light it up. The OLED emitting is successfully survived. Deuterium atoms (isotopes of hydrogen) with heavier atomic weights can strengthen C‐D bonds, slow down the kinetic rate for unwarranted chemical reactions, and improve the performance and stability of OLEDs. In this study, deuterated D‐Ir (mppy)3 was employed as the dopant in the emitting layer of green OLED to replace the general Ir (mppy)3 to improve the optoelectronic properties and extend the lifetime of green OLED. At a constant voltage of 4 V, the initial luminance and half lifetime of general Ir (mppy)3 doped and deuterated D‐Ir (mppy)3 doped OLEDs are 188.1 cd/m2, 7.2 h and 438.3 cd/m2, 42.8 h, respectively. It is shown that doping the deuterated D‐Ir (mppy)3 material in the emitting layer has the effect of prolonging the lifetime of OLED. Compared with the general Ir (mppy)3, the lifetime of deuterated D‐Ir (mppy)3 doped OLED achieved an extension by 5.9 times.

Mild Oxygen Plasma Treated Pedot : Pss As Anode Buffer Layer for Vacuum Deposited Organic Light-Emitting Diodes

Ac Electrodeposition Of Pedot Films In Protic Ionic Liquids For Long-Term Stable Organic Electrochemical Transistors

Enhanced flexibility and stability of PEDOT:PSS electrodes through interfacial crosslinking for flexible organic light-emitting diodes

Flexible Organic Light-Emitting Diodes with Poly-3,4-ethylene- Dioxythiophene As Transparent Anode

Solution-Processed Self-Stratifying Layer with Controllable Dielectric Polarization for High-Luminance Organic Light-Emitting Diodes

High-Performance Transparent PEDOT: PSS/CNT Films for OLEDs

Feasible Modification of PEDOT:PSS by Poly(4-styrenesulfonic Acid): A Universal Method to Double the Efficiencies for Solution-Processed Organic Light-Emitting Devices.

Conductivity and Stability Enhancement of PEDOT:PSS Electrodes via Facile Doping of Sodium 3-Methylsalicylate for Highly Efficient Flexible Organic Light-Emitting Diodes

Performance Improvement of Blue Thermally Activated Delayed Fluorescence OLEDs Via Vapor Annealing by High Boiling Point Solvent

A Cost-Effective Strategy to Modify the Electrical Properties of PEDOT:PSS via Femtosecond Laser Irradiation

Surface treatment of indium tin oxide by oxygen-plasma for organic light-emitting diodes

Highly conductive polymer electrodes for polymer light-emitting diodes

Improved Performance of Organic Light-Emitting Diodes with MgF 2 As the Anode Buffer Layer

The lifetime improvement of organic light‐emitting diodes with poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate on indium‐tin‐oxide surface and deuterated dopant in emitting layer

Low Boiling-point Solvents Treatment of PEDOT∶PSS Film for Optimized Photovoltaic Cell Performance

Organic Light-Emitting Diodes Array with High-Luminance Stability and Low-Lateral Leakage by Hybridized Plasma Treatments

Improved Efficiency of Indium-Tin-Oxide-Free Organic Light-Emitting Devices Using Pedot:Pss/Graphene Oxide Composite Anode

The Improvement of the Performance of Sky-Blue OLEDs by Decreasing Interface Traps and Balancing Carriers with PSVA Treatment

Optimizing QLED Performance and Stability via the Surface Modification of PEDOT:PSS Experimental Insights and DFT Calculations

Solution-processed PEDOT:PSS:GO/Ag NWs composite electrode for flexible organic light-emitting diodes

Boosting the Efficiency and Stability of Perovskite Light-Emitting Devices by a 3-Amino-1-propanol-Tailored PEDOT:PSS Hole Transport Layer