Abstract:In a sealed electromagnetic relay, the change in the surface roughness mainly depends on the collision wear between the contact and the moving reed and the ablation effect of the arc on the contact surface based on the strong correlation between the contact resistance and the surface roughness of the Ag-Mg-Ni contact. With a change in contact resistance, the contact temperature increase in a hermetically sealed electromagnetic relay (HSER) is greatly affected. Under extreme overload conditions, the contact surface is severely ablated by the arc, and the roughness increases rapidly with the number of cycles, which greatly affects the contact resistance of the contact surface and the reliability of the relay. A thermal model of a relay contact system based on the surface roughness of Ag-Mg-Ni contacts was established in this paper by analyzing the effect of an arc on the surface roughness of Ag-Mg-Ni contacts under heavy overload conditions. The arc image of the Ag-Mg-Ni contact was recorded using a double-axis arc photographing platform, and the moving track of the arc center under overload conditions was drawn. This paper explored the patterns of arc center movement on the contact surface and the effects of the arc on the surface roughness of the contacts by analyzing the probabilities of the arc center appearing in various locations. A mathematical model correlating the number of contact cycles with contact resistance was established. Subsequently, a finite element simulation model for the equivalent heat source of the contact was developed. The theoretical model error was less than 10%. The accuracy of the equivalent heat source model was verified by comparing the measured data with the simulation results.

Study on Influence of Silver Contact Vapor on Arc Characteristics in Aerospace Relay

Study on Static Arc Behaviors in a Relay Considering Influence of the Silver Vapor

Electrode Evaporation Effects on Air Arc Behavior

Experimental Study On Arcing Process And Contact Erosion Under Transverse Magnetic Field

Evaporation Erosion of Contacts under Static Arc by Gas Dynamics and Molten Pool Simulation

Study of the Influence of Cu Vapour on Air Arc Characteristics

Research on Arc Erosion Products on Silver-metal Oxide Contacts Materials

Equivalent Heat Source Model of Thermal Relay Contact Based on Surface Roughness of Silver–Magnesium–Nickel Contact

The Influence of Electrode Erosion on the Air Arc in a Low-Voltage Circuit Breaker

Study on the influence of metal particles on the characteristics of high-current vacuum arc plasma

Ferromagnetic Material Effects on Air Arc Behavior

Characterisation of surface morphology of high voltage DC relay contacts under arc erosion

A Comparison of the Effects of Different Mixture Plasma Properties on Arc Motion

Experimental Study on Spatial and Temporal Distribution of Metal Vapor Atoms in High-Current Vacuum Arc

Simulation and Experimental Research on Air Are Movement Characteristics in Low-voltage Circuit Breaker Considering Electrodes Erosion

Evaporation Erosion During the Relay Contact Breaking Process Based on A Simplified Arc Model

Influence of Copper Vapor on Low-Voltage Circuit Breaker Arcs During Stationary and Moving States

Simulation of Arcs for DC Relay Considering Different Impacts

Numerical Analysis Of The Influence Of Splitter-Plate Erosion On An Air Arc In The Quenching Chamber Of A Low-Voltage Circuit Breaker

The Effect of Metal Wires on Vacuum Flashover

Simulation of Arc Dwelling Behavior During Bridge-Type Contacts Opening Process for High-Power Relay