Abstract:A current-mode front-end circuit with low voltage and low power for analog hearing aids is presented. The circuit consists of a current-mode AGC (automatic gain control) and a current-mode adaptive filter. Compared with its conventional voltage-mode counterparts, the proposed front-end circuit has the identified features of frequency compensation based on the state space theory and continuous gain with an exponential characteristic. The frequency compensation which appears only in the DSP unit of the digital hearing aid can upgrade the performance of the analog hearing aid in the field of low-frequency hearing loss. The continuous gain should meet the requirement of any input amplitude level, while its exponential characteristic leads to a large input dynamic range in accordance with the dB SPL (sound pressure level). Furthermore, the front-end circuit also provides a discrete knee point and discrete compression ratio to allow for high calibration flexibility. These features can accommodate users whose ears have different pain thresholds. Taking advantage of the current-mode technique, the MOS transistors work in the subthreshold region so that the quiescent current is small. Moreover, the input current can be compressed to a low voltage signal for processing according to the compression principle from the current-domain to the voltage-domain. Therefore, the objective of low voltage and low power (48 μW at 1.4 V) can be easily achieved in a high threshold-voltage CMOS process of 0.35 μm (VTON + |VTOP|≈ 1.35 V). The THD is below −45 dB. The fabricated chip only occupies the area of 1 × 0.5 mm2 and 1 × 1 mm2.

A Low Power Gain Control System for a 1V Hearing Aid Device

Research and Implementation of A Low-power High-linearity Audio ΣΔ ADC In 65nm Process

A Low-Power Inverter-Based ΣΔ Analog-to-digital Converter for Audio Applications

An Ultra-low-power Gain-boost Class-C Inverter and Its Application

A High-Performance,Low-Power ΣΔ Modulator for Digital Audio Applications

A Σδ Modulator Using Gain-Boost Class-C Inverter for Audio Applications.

Low-power High-Linearity Sigma-Delta Modulator for Audio Applications

Current Mode Feed-Forward Gain Control for 0.8V CMOS Hearing Aid

A 1V, 1.1mw Mixed-Signal Hearing Aid SoC in 0.13μm CMOS Process

An Audio Cascaded Sigma Delta Modulator Using Gain-Boost Class-C Inverter

A 65-Nm Low-Power High-Linearity ΣΔ ADC for Audio Applications

A 79-Db SNR 1.1-Mw Fully Integrated Hearing Aid SoC

A 1-V, 1.2-Ma Fully Integrated SoC for Digital Hearing Aids

An audio cascaded ΣΔ modulator using gain-boost class-C inverter

Low power hardware implementation of multi-channel wide dynamic range compression for digital hearing aids

A 1.4-V 48-μW current-mode front-end circuit for analog hearing aids with frequency compensation

A 1-V 25-&Amp;#x00b5;w Low-Noise CMOS Programmable Gain Pre-Amplifier for Digital Hearing Aid

Algorithm Research and Low-power VLSI Design of a Multi-channel Digital Hearing Aid

An Ultra Low Power Sigma-Delta Modulator for Hearing Aid with Double-Sampling

A Low-Power Decibel-Linear CMOS Automatic Gain Control

A 0.8-V 230-$\mu$ W 98-dB DR Inverter-Based $\Sigma \Delta$ Modulator for Audio Applications.