Abstract:Poly(arylene ether sulfone)-based ionomers containing sulfofluorenyl groups have been synthesized for applications to polymer electrolyte membrane fuel cells (PEMFCs). In order to achieve high proton conductivity and chemical, mechanical, and dimensional stability, the molecular structure of the ionomers has been optimized. Tough, flexible, and transparent membranes were obtained from a series of modified ionomers containing methyl groups with the ion-exchange capacity (IEC) ranging from 1.32 to 3.26 meq/g. Isopropylidene tetramethylbiphenylene moieties were more effective than the methyl-substituted fluorenyl groups in giving a high-IEC ionomer membrane with substantial stability to hydrolysis and oxidation. Dimensional stability was significantly improved for the methyl-substituted ionomer membranes compared to that of the non-methylated ones. This new ionomer membrane showed comparable proton conductivity to that of the perfluorinated ionomer membrane (Nafion 112) under a wide range of conditions (80-120 degrees C and 20-93% relative humidity (RH)). The highest proton conductivity of 0.3 S/cm was obtained at 80 degrees C and 93% RH. Although there is a decline of proton conductivity with time, after 10 000 h the proton conductivities were still at acceptable levels for fuel cell operation. The membranes retained their strength, flexibility, and high molecular weight after 10 000 h. Microscopic analyses revealed well-connected ionic clusters for the high-IEC membrane. A fuel cell operated using the polyether ionomer membrane showed better performance than that of Nafion at a low humidity of 20% RH and high temperature of 90 degrees C. Unlike the other hydrocarbon ionomers, the present membrane showed a lower resistance than expected from its conductivity, indicating superior water-holding capability at high temperature and low humidity.

Sulfonated poly(fluorenyl ether ketone) membrane prepared via direct polymerization for PEM fuel cell application

PVDF-based Polymer Blend Films for Fuel Cell Membranes

Novel sulfonated poly(phthalazinone ether ketone) ionomers containing benzonitrile moiety for PEM fuel cell applications

Cross-linked sulfonated poly(phathalazinone ether ketone)s for PEM fuel cell application as proton-exchange membrane

Poly(phthalazinone ether ketone) ionomers synthesized via N-C coupling reaction for fuel cell applications

Sulfonated poly(fluorenyl ether ketone) ionomers containing aliphatic functional segments for fuel cell applications

Fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) for fuel cell applications

Synthesis and Properties of Fluorenyl-Containing Multiblock Sulfonated Poly(Arylene Ether Sulfone) Membranes for Fuel Cell Applications

Polyelectrolyte based on tetra-sulfonated poly(arylene ether)s for direct methanol fuel cell

Polyelectrolytes for Fuel Cells Made of Sulfonated Poly (phthalazinone Ether Ketone)S

Preparation and Properties of Novel Sulfonated Poly(P-Phenylene-Co-Aryl Ether Ketone)S for Polymer Electrolyte Fuel Cell Applications

Sulfonated Poly(aryl Ether Ketone)s Containing the Hexafluoroisopropylidene Diphenyl Moiety Prepared by Direct Copolymerization, As Proton Exchange Membranes for Fuel Cell Application

Tuned polymer electrolyte membranes based on aromatic polyethers for fuel cell applications

Fluorene-Containing Sulfonated Poly(Arylene Ether 1,3,4-Oxadiazole) As Proton-Exchange Membrane for Pem Fuel Cell Application

Polymer Electrolyte Membranes Based on Poly(Phenylene Ether)S with Sulfonic Acid Via Long Alkyl Side Chains

Synthesis of highly proton-conductive poly(arylene ether sulfone) bearing perfluoroalkyl sulfonic acids via polymer post-modification

Sulfonated Poly(Phthalazinone Ether Sulfone Ketone)/Poly(Vinylidene Fluoride) Blend Membranes for Direct Methanol Fuel Cell

Proton-conducting membranes from poly(ether sulfone)s grafted with sulfoalkylamine

Synthesis of Sulfonated Poly(Imidoaryl Ether Sulfone) Membranes for Polymer Electrolyte Membrane Fuel Cells

Novel sulfonated poly(arylene ether ketone) containing benzoxazole membranes for proton exchange membrane fuel cell

Sulfonated Polybenzothiazoles Containing Hexafluoroisopropyl Units for Proton Exchange Membrane Fuel Cells