Abstract:The objective of the present simulations is to evaluate the applicability of the standard k-epsilon turbulence model in engineering practice in the subcritical to supercritical flow regimes. Two-dimensional numerical simulations of flow around a circular cylinder at Re=1x10(5), 5x10(5) and 1x10(6), had been performed using Unsteady Reynolds-Averaged Navier Stokes (URANS) equations with the standard k-e turbulence model. Solution verification had been studied by evaluating grid and time step size convergence. For each Reynolds number, several meshes with different grid and time step size resolutions were chosen to calculate the hydrodynamic quantities such as the time- averaged drag coefficient, root-mean square value of lift coefficient, Strouhal number, the coefficient of pressure on the downstream point of the cylinder, the separation angle. By comparing the values of these quantities of adjacent grid or time step size resolutions, convergence study has been performed. Solution validation is obtained by comparing the converged results with published numerical and experimental data. The deviations of the values of present simulated quantities from those corresponding experimental data become smaller as Reynolds numbers increases from 1x10(5) to 1x10(6). This may show that the standard k-epsilon model with enhanced wall treatment appears to be applicable for higher Reynolds number turbulence flow.

THE STUDY OF CFD FOR MODELING THE FLOW AROUND AN ISOLATED WHEEL

Computation of Flow Past an In-Line Oscillating Circular Cylinder and a Stationary Cylinder in Tandem Using a CIP-Based Model

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Analysis of flow characteristics in the volute casing of centrifugal pump based on numerical simulation

Numerical Simulation of a Turbulence Flow in the Cut-off Valve by RNG k- ε Turbulence Model

The Influence of Advection Schemes and Turbulence Closure Models on Drag Coefficient Calculation Around a Circular Cylinder at High Reynolds Number

Numerical Study on the Vortex Motion Patterns Around a Rotating Circular Cylinder and Their Critical Characters

Simulation of Flows Around Two Tandem Rotating Cylinders in a Channel Using LB-DF/FD Method

THE DRAG OF CYLINDRICAL PARTICLE IN TWO PHASE FLOW

Aerodynamics of isolated cycling wheels using wind tunnel tests and computational fluid dynamics

Numerical Simulation of Flow Around a Cylinder for Different Reusing a Meshless Method

The Study of the Aerodynamic Characteristics and 3-D Separated Flow around a Notchback Car

Theoretical and Numerical Analysis of Key Sub-Grid Quantities' Effect on Filtered Eulerian Drag Force

Study of the Flow Around a Cylinder from the Subcritical to Supercritical Regimes

Numerical Calculations for Smooth Circular Cylinder Flow at 3900 Reynolds Numbers with SST-IDDES Turbulence Model

Numerical investigation on three-dimensional complexity flows in a wheel of radial inflow turbine

Numerical study on flow and heat transfer characteristics of low pressure gas in slip flow regime

Evaluation of wind tunnel interference on numerical prediction of wheel aerodynamics

Study of the Mechanism Governing the Flow and Heat Exchange Inside a Turbine Wheel Disk-formed Chamber

The Study of the Accuracy of the Numerical Calculating of the Fastback Cars

Numerical Simulation of three-dimensional flow around a circular cylinder of finite length