Abstract:A mild steel-friction self-centering damper with a hybrid energy-dissipation mechanism (MS-SCFD) was proposed, which consisted of a mild steel, frictional, dual-energy-dissipation system and a disc spring resetting system. The structure and principle of the MS-SCFD were explained in detail while the restoring force model was established. The hysteretic behavior of the MS-SCFD under low-cycle reciprocating loading was modeled. Then, the influence of parameters such as the disc spring preload, the friction coefficient, and the soft-steel thickness on the mechanical properties of the MS-SCFD was investigated. The results indicate that the simulation results are basically consistent with the theoretical prediction results, with a maximum error of only 9.46% for the key points of bearing capacity. Since the MS-SCFD is provided with a hysteretic curve in the typical flag type, it will obtain the capacity of excellent self-centering performance. It can effectively enhance the stiffness, bearing capacity, and self-centering capability of the damper after the pre-pressure of the disc spring is increased. The energy-dissipation capacity of the MS-SCFD increases with the increase in the friction coefficient. However, it also increases the residual deformation of the MS-SCFD. The energy dissipation of the MS-SCFD is particularly sensitive to the thickness of mild steel. After being loaded, all components of the MS-SCFD are not damaged except for the plastic deformation caused by the yielding of the mild steel. The normal function of the MS-SCFD can be restored simply by replacing the mild steel plates after the earthquake. Therefore, it can significantly enhance the economy and applicability of the damper.

THEORY OF ELECTROMAGNETIC FRICTION ENERGY DISSIPATION DAMPER AND ITS USE IN STRUCTURAL ENGINEERING

Studies on a Passive Electromagnetic Damper

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

THEORETICAL ANALYSIS AND EXPERIMENTAL TEST ON DAMPING CHARACTERISTICS OF CFRP STAY CABLES

Experimental and numerical investigations of a staged energy dissipation device

Outline of Electromagnetic Damper and Further Research on Theoretical Model

A friction-strip hybrid damper with multi-phase energy dissipation mechanism: Cyclic test and numerical verification

A Disc-Type Magneto-Rheologtic Fluid Damper

Hydrodynamics and Energy Dissipation in A Ferrofluid Damper

Development of A Double-Sliding Friction Damper (Dsfd)

Structural design and damping characteristics modeling of new recycling vibrational energy hydraulic vibration damper.

Study on Displacement-Based Design Method for Energy Dissipation Structures

Theoretical analysis and experimental validation of multi‐level friction damping system

Hysteretic Performance Test and Simulation Analysis of A New Type of Mild Steel Damper

Composite Structure Design and Behavior Research of Magmetorheological Damper

Study on a new type of passive electromagnetic damper

Analytical development and experimental investigation of the casting multi-plate damper (CMPD)

Experiments and numerical prediction on a new type of mild steel damper with separable phase yielding

Shear Thickening Fluid–based Energy-Free Damper: Design and Dynamic Characteristics

Research on the Mechanical Model and Hysteresis Performance of a New Mild Steel-Rotational Friction Hybrid Self-Centering Damper