Abstract:Reasonable design and feasible preparation of low-cost and stable oxygen reduction reaction (ORR) catalysts with excellent performance play a key role in the development of fuel cells and metal-air batteries. A 3D porous superimposed nanosheet catalyst composed of metal manganese covered with MnO2 nanofilms (P-NS-MnO2@Mn) was designed and synthesized by rotating disk electrodes (RDEs) through one-step electrodeposition. The catalyst contains no carbon material. Therefore, the oxidation and corrosion of the carbon material during use can be avoided, resulting in excellent stability. The structural and composition characterizations indicate that the nanosheets with sharp edges exist on the surface of the wall surrounding the macropore (diameter ∼ 5.07 μm) and they connect tightly. Both the nanosheets and the wall of the macropore are composed of metal manganese covered completely with MnO2 film with a thickness of less than 5 nm. The half-wave potential of the synthesized P-NS-MnO2@Mn catalyst is 0.86 V. Besides, the catalyst exhibits good stability with almost no decay after a 30 h chronoamperometric test. Finite element analysis (FEA) simulation reveals the high local electric field intensity surrounding the sharp edges of the nanosheets. Density functional theory (DFT) calculations reveal that the novel nanosheet structure composed of MnO2 nanofilms covered on the surface of the Mn matrix accelerates the electronic transfer of the MnO2 nanofilms during the ORR process. The high local electric field intensity near the sharp edge of the nanosheets effectively promotes the orbital hybridization and strengthens the adsorbing Mn-O bond between the active site Mn in the nanosheets and the intermediate OOH* during the ORR process. This study provides a new strategy for preparing transition metal oxide catalysts and a novel idea about the key factors affecting the catalytic activity of transition metal oxides for the ORR.

Synthesis of Nano-Manganese Dioxide Catalyst for Oxygen Diffusion Electrode Application

High-Density NiMnFe Hydroxide Nanoparticle-Nanosheet Arrays for Industrial-Level Electrochemical Oxygen Evolution Reaction

Three-Dimensional Ni Foam-Supported CoO Nanoparticles/N-Doped Carbon Multilayer Nanocomposite Electrode for Oxygen Evolution

High-Density NiMnFe Hydroxide Hierarchical Nano-arrays for Industrial-level Electro-chemical Oxygen Evolution Reaction

Controlling the Interfacial Environment in the Electrosynthesis of MnOx Nanostructures for High-Performance Oxygen Reduction/Evolution Electrocatalysis

Preparation and Electrochemical Performance of Nanostructured MnO2 Materials

Preparation of nickel-manganese based bimetallic hydroxide nanosheets for enhanced electrocatalytic oxygen evolution reaction

Engineering electronic structures and oxygen vacancies of manganese-doped nickel molybdate porous nanosheets for efficient oxygen evolution reaction

Nano-structured Manganese Oxide As a Cathodic Catalyst for Enhanced Oxygen Reduction in a Microbial Fuel Cell Fed with a Synthetic Wastewater.

Catalytic Evaluation of Nanoflower Structured Manganese Oxide Electrocatalyst for Oxygen Reduction in Alkaline Media

Nitrogen doping regulates microcrystal structure of interconnected Mn oxide particles/rods for oxygen reduction electrocatalysis

Superlattice-Like Co-Doped Mn Oxide and NiFe Hydroxide Nanosheets toward an Energetic Oxygen Evolution Reaction

Nanoflake NiMn Layered Double Hydroxide Coated on Porous Membrane-like Ni-Foam for Sustainable and Efficient Electrocatalytic Oxygen Evolution

Plasma‐assisted Surface Engineering to Stabilize Mn3+ in Electrodeposited Manganese Oxide Films for Water Oxidation

Mn-doping tuned electron configuration and oxygen vacancies in NiO nanoparticles for stable electrocatalytic oxygen evolution reaction

Study on the Catalytic Activity and Selectivity of Manganese Dioxide-Modified Nickel–Iron-Based Hydroxide Electrodes for Initiating the Oxygen Evolution Reaction in Natural Seawater

Oxygen Vacancy Rich Δ-Mno2 Nanosheets Encapsulating Single Cobalt Atoms-Anchored Carbon Nanotubes for Efficient Oxygen Evolution

Xerogel-Derived Manganese Oxide/N-Doped Carbon as a Non-Precious Metal-Based Oxygen Reduction Reaction Catalyst in Microbial Fuel Cells for Energy Conversion Applications

Carbon-Free, Binder-Free MnO2@Mn Catalyst for Oxygen Reduction Reaction.

Atomic manganese coordinated to nitrogen and sulfur for oxygen evolution

N and Mn dual-doped cactus-like cobalt oxide nanoarchitecture derived from cobalt carbonate hydroxide as efficient electrocatalysts for oxygen evolution reactions