Abstract:Fiber-type dye-sensitized solar cells (FDSSCs) are attractive as an energy source of soft electronics due to low-costs, non-toxicity and especially, their indoor-weak-light workable features. The TiO2 nanotube array (TNA) can grow on flexible Ti wires directly using anodization technique, which is convenient and can provide better contact between substrate/TiO2. However, a systematic study of assembling efficient TNA on photoanode of FDSSC is limited. This study investigated the anodization voltage and time effects of growing TNA on Ti wires. TiO2 nanoparticles (TNP) are fabricated on TNA using dip-coating technique to compensate for low dye adsorption of TNA. Dip-coating rate is varied to optimize TNP thicknesses to provide effective dye adsorption and charge-transfer routes. The highest photon-to-electricity conversion efficiency (η) of 3.31% was obtained for FDSSCs with TNA/TNP photoanode prepared using 60 V as the anodization voltage and 40 cm/min as the dip-coating rate. The influence of titanium wire diameter on η of FDSSCs was studied. The bending test was carried out on flexible FDSSC assembled using plastic tube. The photocurrent retention of 84% is achieved for flexible FDSSC bended for 10 times. This work firstly provides facile ways to assemble efficient photoanode with composite TiO2 structures for FDSSC and opens new insights on studying titanium wire natures on FDSSC performance.

Vertically Oriented Tio2 Nanotube Arrays Grown on Ti Meshes for Flexible Dye-Sensitized Solar Cells

Application of Highly Ordered TiO<sub>2</sub> Nanotube Arrays in Flexible Dye-Sensitized Solar Cells

Controllable Preparation of TiO2 Nanowire Arrays on Titanium Mesh for Flexible Dye-Sensitized Solar Cells

Highly ordered hierarchical TiO2 nanotube arrays for flexible fiber-type dye-sensitized solar cells

Flexible Fiber-Type Dye-Sensitized Solar Cells Based on Highly Ordered TiO2 Nanotube Arrays

Fabrication of Highly-Oriented TiO2 Nanotube Arrays and Its Application in Dye-Sensitized Solar Cells

Synthesis of Long TiO2 Nanotube Arrays with a Small Diameter for Efficient Dye-Sensitized Solar Cells

Tunable Fabrication of TiO2 Nanotube Arrays with High Aspect Ratio and Its Application in Dye Sensitized Solar Cell

Ordered TiO2 Nanotube Arrays on Transparent Conductive Oxide for Dye-Sensitized Solar Cells

Advantages of using Ti-mesh type electrodes for flexible dye-sensitized solar cells.

The Use Of Ti Meshes With Self-Organized Tio2 Nanotubes As Photoanodes Of All-Ti Dye-Sensitized Solar Cells

A facile route to aligned TiO2 nanotube arrays on transparent conducting oxide substrates for dye-sensitized solar cells

Conveniently Fabricated Heterojunction Zno/Tio2 Electrodes Using Tio2 Nanotube Arrays for Dye-Sensitized Solar Cells

Improved Performance in Dye-Sensitized Solar Cells by Rationally Tailoring Anodic Tio2 Nanotube Length

The Fabrication of Highly Ordered TiO2 Nanotube Arrays and Their Application in Dye-Sensitized Solar Cells

Hybrid TiO2–SnO2 Nanotube Arrays for Dye-Sensitized Solar Cells

Flexible TiO 2 nanotube-based dye-sensitized solar cells using laser-drilled microhole array electrodes

Dye-Sensitized Solar Cells Based on TiO2 Nanotube and Shelled Arrayed Structures

Substrate Diameter-Dependent Photovoltaic Performance of Flexible Fiber-Type Dye-Sensitized Solar Cells with TiO2 Nanoparticle/TiO2 Nanotube Array Photoanodes

Synthesis of TiO2 Nanotube Arrays and Its Application in Mini-3D Dye-Sensitized Solar Cells

A cylindrical core-shell-like TiO2 nanotube array anode for flexible fiber-type dye-sensitized solar cells.