Abstract:A microstrip bandpass filter with enhanced stopband rejection was designed based on the temporal coupled-mode theory in order to realize the signal isolation between transmitter and receiver (TR)channels in radio frequency (RF) transceiver systems.The filter consisted of two microstrip resonators,one supports an odd and an even mode,and the other supported an even mode.These three resonant modes coupled with each other,producing a transmission zero at low frequency below the passband,and two transmission zeros at high frequency above the passband.High frequency selection,passband flatness,and good stopband rejection above the passband were achieved.A C-band triple-mode microstrip bandpass filter was taken as an example.The characteristics of the filter with enhanced high-frequency stopband rejection can be accurately calculated by using temporal coupled-mode theory,and the coupling relationship among the three resonant modes can be obtained.The filter structure which satisfies the coupling relationship can be finished by using electromagnetic eigenmode simulation.The proposed filter was fabricated and tested.The test results matched the theoretical prediction well.Results show that the filter can be effectively applied in the isolation between TR channels in RF transceiver systems.The temporal coupled-mode theory can highly improve the design efficiency of filters with multi-mode coupling,which can achieve the required filter response of the system with high speed.

Microstrip Bandpass Filter Design Using Triangular Open Loop Resonators With Improved Cross-Coupled Structure

Design of multilayer triangular substrate integrated waveguide filter in LTCC

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

Design of microstrip bandpass filter with enhanced stopband rejection based on coupled-mode theory

Compact transversal bandpass filter incorporating microstrip dual-mode open-loop resonator and slot line resonator with source-load coupling

Microstrip bandpass filter using a triangular-patch resonator with three transmission zeros

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Compact and High-Selectivity Microstrip Bandpass Filter Using Quad-Mode Resonator

Microstrip Spiral-Coupled Scheme Bandpass Filters with Mutual Electric and Magnetic Coupling

A novel compact microstrip bandpass filter using an open-loop resonator with radial stub

Design of Compact Dual Band Bandpass Filter with Controllable Bandwidths and Good Selectivity

A compact and high-selectivity tri-band bandpass filter based on symmetrical stub-loaded square ring resonator

Compact Tri-Band Bandpass Filter Using Open Stub Loaded Tri-Section $\lambda /4$ Stepped Impedance Resonator

The Design for Tri-Band BandPass Filter Using OPen-LooP Resonator and Asynnetric CouPling Lines

Microstrip tri-band bandpass filter using dissimilar stepped-impedance-resonator with controllable multiple transmission zeros

Compact tri-band bandpass filter using short stud-loaded symmetric loop multimode resonator

Design of Microstrip Filter Based on Slow‐wave Open‐loop Resonator

High Selectivity Quadruple‐mode Broadband Bandpass Filter with Source‐load Coupling

Compact Microstrip Wideband Bandpass Filter with High Selectivity

Miniaturized Microstrip lowpass filter with ultra-wide Stopband

Microstrip Dual-Mode Triangular Patch Resonator Bandpass Filters with Two or Four Transmission Zeros