Abstract:Ethanol is regarded as one of the most promising alternative renewable fuels and as well as an oxygenate blending component in gasoline fuels, with widespread usage in many countries around the world. Laminar flame speeds can have strong influence on the stability and operability of Spark-Ignition combustion in certain operating regimes, and so the effects of different initial conditions on laminar combustion characteristics of E30 (gasoline blended with ethanol of 30% liquid volume) were analyzed in a constant-volume combustion vessel using the high-speed Schlieren method. This work presents results for equivalence ratios of 0.7-1.4, dilution ratios of 0%, 5%, 10%, and at different initial temperatures (408, 453 and 498 K) and initial pressures (1, 2 and 3 bar). It can be concluded that the laminar burning velocity has a positive correlation with initial temperature, but negative correlation with initial pressure and dilution ratio. The laminar burning velocity always reaches its maximum value at an equivalence ratio of 1.1 and does not change with varying initial conditions' the adiabatic flame temperature displays a similar variation with the initial conditions. The flame instability of E30-air mixture is enhanced as the initial pressure increases. Flame stability at lean and rich mixtures are exactly opposite at different initial temperature and dilution ratio. The laminar burning velocity was significantly promoted relative to gasoline and E10 by the addition of higher volume fractions of ethanol, highlighting one of the benefits of ethanol's use as a blending component in gasoline fuels.

Study on Premixed Laminar Combustion Characteristics of Ethanol-Air-Diluted Mixtures at Elevated Pressures and Temperatures

Experimental Study on Combustion Characteristics of Dimethyl Ether-Air Premixed Mixtures at Elevated Pressure and Temperature

Experimental and Numerical Study on the Effect of Hydrogen Addition on Laminar Burning Velocity of Ethanol-Air Mixtures

Study on Laminar Burning Characteristics of Premixed High-Octane Fuel−Air Mixtures at Elevated Pressures and Temperatures

COMBUSTION CHARACTERISTICS OF METHANOL-AIR AND METHANOL-AIR-DILUENT PREMIXED MIXTURES

Combustion Characteristics of Methanol–air and Methanol–air–diluent Premixed Mixtures at Elevated Temperatures and Pressures

Experiment Study on Major and Intermediate Species of Ethanol/N-Heptane Premixed Flames

Experimental Study on the Premixed Laminar Flames for Ethanol-Air Mixtures

Measurements of Laminar Burning Velocities and Markstein Lengths for Methanol–air–nitrogen Mixtures at Elevated Pressures and Temperatures

Measurements of Laminar Burning Velocities and Markstein Lengths Ofn-Butanol−air Premixed Mixtures at Elevated Temperatures and Pressures

Measurements of Laminar Flame Speeds and Flame Instability Analysis of E30-air Premixed Flames at Elevated Temperatures and Pressures

Study on Laminar Burning Characteristics of High Octane Fuel-Air Mixtures

Characterization of Laminar Premixed Methanol–air Flames

Experimental Study on Premixed Combustion of Dimethyl Ether-Hydrogen-Air Mixtures

The Temperature and Pressure Dependencies of Propagation Characteris-tics for Premixed Laminar Ethanol-Air Flames

Measurements on laminar burning velocities of hydrogen/oxygen/diluents at elevated pressure and temperature

Measurement of Laminar Burning Velocity of Dimethyl Ether–air Premixed Mixtures

Laminar Flame Characteristcs of Ethanol-Air Mixture: Experimental and Simulation Study

Analysis on Ethanol-air Mixture Premixed Laminar Flame Structure at Different Initial Conditions

Study on Combustion Characteristics of Dimethyl Ether-Air-N2/CO2Premixed Mixtures

Measurements of laminar burning velocities and flame stability analysis for dissociated methanol–air–diluent mixtures at elevated temperatures and pressures