Abstract:PURPOSE This work applies a cascaded systems model for cone-beam CT imaging performance to the design and optimization of a system for musculoskeletal extremity imaging. The model provides a quantitative guide to the selection of system geometry, source and detector components, acquisition techniques, and reconstruction parameters. METHODS The model is based on cascaded systems analysis of the 3D noise-power spectrum (NPS) and noise-equivalent quanta (NEQ) combined with factors of system geometry (magnification, focal spot size, and scatter-to-primary ratio) and anatomical background clutter. The model was extended to task-based analysis of detectability index (d') for tasks ranging in contrast and frequency content, and d' was computed as a function of system magnification, detector pixel size, focal spot size, kVp, dose, electronic noise, voxel size, and reconstruction filter to examine trade-offs and optima among such factors in multivariate analysis. The model was tested quantitatively versus the measured NPS and qualitatively in cadaver images as a function of kVp, dose, pixel size, and reconstruction filter under conditions corresponding to the proposed scanner. RESULTS The analysis quantified trade-offs among factors of spatial resolution, noise, and dose. System magnification (M) was a critical design parameter with strong effect on spatial resolution, dose, and x-ray scatter, and a fairly robust optimum was identified at M ∼ 1.3 for the imaging tasks considered. The results suggested kVp selection in the range of ∼65-90 kVp, the lower end (65 kVp) maximizing subject contrast and the upper end maximizing NEQ (90 kVp). The analysis quantified fairly intuitive results-e.g., ∼0.1-0.2 mm pixel size (and a sharp reconstruction filter) optimal for high-frequency tasks (bone detail) compared to ∼0.4 mm pixel size (and a smooth reconstruction filter) for low-frequency (soft-tissue) tasks. This result suggests a specific protocol for 1 × 1 (full-resolution) projection data acquisition followed by full-resolution reconstruction with a sharp filter for high-frequency tasks along with 2 × 2 binning reconstruction with a smooth filter for low-frequency tasks. The analysis guided selection of specific source and detector components implemented on the proposed scanner. The analysis also quantified the potential benefits and points of diminishing return in focal spot size, reduced electronic noise, finer detector pixels, and low-dose limits of detectability. Theoretical results agreed quantitatively with the measured NPS and qualitatively with evaluation of cadaver images by a musculoskeletal radiologist. CONCLUSIONS A fairly comprehensive model for 3D imaging performance in cone-beam CT combines factors of quantum noise, system geometry, anatomical background, and imaging task. The analysis provided a valuable, quantitative guide to design, optimization, and technique selection for a musculoskeletal extremities imaging system under development.

Analysis of reasons for adverse events due to medical devices

[Analysis on the Common Causes for Traditional Chinese Medicinal Injection Induced Adverse Reactions and the Preventive Countermeasures].

[Analysis on Evaluation of Medical Device Adverse Events Monitoring and Some Factors Influencing MDAE's Reporting by Medical Personnels].

Multidimensional typologies of faulty medical device events: analysis, risk characterisation, and stakeholder mapping

Barriers in reporting adverse effects of medical devices: a literature review

[The current situation review of medical device risk management]

Causes assessment and precautions of 1309 case reports related to orthopedics implants

Cholinesterase activity of seminal plasma and human spermatozoa in normal and infertile subjects.

The Current Problems of Regulation of Medical Devices and Countermeasures

Comparative Study on Monitoring System of Medical Device Adverse Events in America, European Union and China

Causation and Treatment of Orthopedic Implants Adverse Events Systematic Review

Risk Management in Medical Device Maintenance Workshops

Analysis of the reason of early dental implant failure

Task-based modeling and optimization of a cone-beam CT scanner for musculoskeletal imaging.

Application Root cause analysis on nursing adverse events

Analysis on 342 Repors and Discssion about the Methods of Prevention with Adverse Drug Reactions/events

Study of Software-Related Causes in the FDA Medical Device Recalls

Risk Management in Medical Device Industry

[Research on the issues in the process of post-market surveillance for medical devices based on the typical case analysis]

Application the Risk-Based Maintenance for Optimizing the Overall Medical Devices Safety

Analysis of 172 Samples Reported and Discussion about the Methods of Prevention with Adverse Drug Reactions