Abstract:A modified nano-calcium carbonate (R-CCR) was prepared by coating a layer of unsaturated hydroxylfatty acid on the surface of CCR powders using a solid state method; the latter were commercial nano-CaCO 3 modified with stearic acid. FTIR studies indicate that the modifier is combined on the surface of CaCO 3 . PP/EPDM/nano-CaCO 3 ternary composites were prepared by a melt-mixing method. SEM and TEM were utilized to examine the morphology of the composites. The tensile fractured surface of PP/EPDM/R-CCR showed a fibroid morphology and large-scale yield deformation. The impact fractured surface showed that the amount of cavities in the PP/EPDM/R-CCR system was increased, however their size diminished obviously. R-CCR particles were dispersed uniformly in the PP matrix, and their compatibility was distinctly improved as compared to CCR when the amount of R-CCR was 15 h −1 . The tensile strength remained nearly constant (reduced from 27.6 MPa to 27.5 MPa), while the impact strength increased from 9.6 kJ/m 2 to 15.4 kJ/m 2 as CCR was replaced by R-CCR. Meanwhile, the bending strength and bending modulus also increased correspondingly. Furthermore, the impact strength of PP/EPDM/R-CCR was maintained at a high level (15.4 kJ/m 2 ), which was more than the sum of that of PP/EPDM and PP/R-CCR (6.6 kJ/m 2 and 6.1 kJ/m 2 respectively). This indicates that the R-CCR and EPDM have a significant synergistic toughening effect on PP while maintaining the strength and modulus of virgin PP. Both the storage modulus G′ and loss modulus G″ of PP/EPDM and PP/EPDM/R-CCR composites increase with increasing frequency, but the values of G′ and G″ of the tertiary composite are relatively higher than those of the binary system. The loss factor and viscosity decrease with increasing frequency, but there is little difference between tertiary and binary composites. The apparent viscosity η of the tertiary system containing R-CCR is lower than that of the tertiary system containing CCR and virgin PP. The viscosity of the composites sig-nificantly decreases with increasing shear rate. The mea-sured mechanical properties of the composites indicate that replacing CCR with R-CCR for binary composites could simultaneously enhance the toughness and strength of PP.

Novel Rigid Poly(vinyl Chloride) Ternary Nanocomposites Containing Ultrafine Full-Vulcanized Powdered Rubber and Untreated Nano-Sized Calcium Carbonate

Fabrication and reinforcement of ternary composites based on polypropylene matrix with bamboo particle/ultrafine bamboo-char

Ultrafine full-vulcanized powdered rubbers/PVC compounds with higher toughness and higher heat resistance

Modification of Poly(vinyl Chloride) with Nano-CaCO3 Coated with Poly(methyl Methacrylate)

EFFECT OF RUBBER AND INORGANIC RIGID PARTICLES ON FRACTURE BEHAVIOR OF INJECTION-MOLDED PVC NANOCOMPOSITES

Good dispersion of hydrophilic nanoscale calcium carbonate particles in nitrile butadiene rubber matrix

Toughening and reinforcement of rigid PVC with silicone rubber/nano-CACO3 shell-core structured fillers

Preparation of Calcium Carbonate@Methyl Methacrylate Nanoparticles by Seeded-Dispersion Polymerization for High Performance Polyvinyl Chloride Nanocomposites

Effect of Surface Structure of Nano-Caco3 Particles on Mechanical and Rheological Properties of Pvc Composites

Morphology and mechanical properties of poly(vinyl chloride)/nano-hydrotalcite composites

Effect of Unsaturated Hydroxyl-Fatty Acid Modified Nano-Caco3 on the Morphological and Rheological Behavior of PP

Synthesis of ACR/nanometer SiO2 Composite Particles and Their Tonghening Effect on PVC

Toughening Polypropylene with Nanoscale Rubber Particles

Study on CaCO3/PVC nanocomposite

Effect Of Rubbers On The Flame Retardancy Of Eva/Ultrafine Fully Vulcanized Powdered Rubber/Nanomagnesium Hydroxide Ternary Composites

Novel Rubber Blends Made from Ultra-Fine Full-Vulcanized Powdered Rubber (UFPR)

Preparation And Characterization Of Poly(Vinyl Chloride)/Layered Double Hydroxides Nanocomposite Via In Situ Suspension Polymerization

Mechanical and Thermal Properties of Nanosized Titanium Dioxide Filled Rigid Poly(vinyl Chloride)

Synergistic Toughening and Strengthening on PVC by Multimedia Modified Nano-meter CaCO_3/CPE

Effects of the Reinforcement and Toughening of Acrylate Resin/Caco3 Nanoparticles on Rigid Poly(Vinyl Chloride)

Study on the Lubrication Behavior of Low Molecular Weight Poly(vinyl Chloride-Co-n-butyl Acrylate-Co-vinyl Acetate) Ternary Copolymer in Rigid PVC