Abstract:Many methods are proposed to deal with the type synthesis of parallel kinematic mechanisms(PKMs), but most of them are less intuitive to some extent. Thus, to propose a concise and intuitive type synthesis method for engineering application is a very challenging issue, which should be further studied in the field. Grassmann line geometry, which can investigate the dimensions of spatial line-clusters in a concise way, is taken as the mathematic foundation. Atlas method is introduced to visually describe the degrees of freedom(DOFs) and constraints of a mechanism, and the dual rule is brought in to realize the mutual conversion of the freedom-space and constraint-space. Consequently, a systematic method based on Grassmann line geometry and Atlas method is generated and the entire type synthesis process is presented. Three type 4-DOF PKMs, i.e., 1T3R, 2T2R and 3T1R(T: translational DOF; R: rotational DOF), are classified according to the different combinations of the translational DOFs and rotational DOFs. The type synthesis of 4-DOF PKMs is carried out and the possible configurations are thoroughly investigated. Some new PKMs with useful functions are generated during this procedure. The type synthesis method based on Grassmann line geometry and Atlas method is intuitive and concise, and can reduce the complexity of the PKMs’ type synthesis. Moreover, this method can provide theoretical guidance for other PKMs’ type synthesis and engineering application. A novel type synthesis method is proposed, which solves the existing methods’ problems in terms of complicated, not intuitive and unsuitable for practical application.

Type Synthesis of 3T1R Parallel Mechanisms Based on GF Set

Type Synthesis of 2T1r-Type Parallel Kinematic Mechanisms and the Application in Manufacturing

Type Synthesis and Typical Application of 1T2r-Type Parallel Robotic Mechanisms

Type synthesis of parallel mechanism with 3T/3R motion patterns

Type Synthesis of 4-DOF Parallel Kinematic Mechanisms Based on Grassmann Line Geometry and Atlas Method

Type Synthesis of 2T1R Planar Parallel Mechanisms and Their Moduling Development Applications

Type synthesis of a new parallel mechanism with complete separation of constraints and drives

Type synthesis of single-loop 3T1R-parallel mechanisms with a multi-DOF drive system

Type Synthesis Method for Parallel Robots With Special Topologies

Type Synthesis of Non-Overconstrained and Overconstrained Two Rotation and Three Translation (2R3T) Parallel Mechanisms with Three Branched Chains

Type synthesis of 5-DOF redundantly actuated parallel robots for super-large components with complicated surfaces.

Type synthesis approach for the 2R1T compliant parallel mechanism with a suitable constrained branch

Type Synthesis of 3-DOF Translational Parallel Manipulators Based on Atlas of DOF Characteristic Matrix

Type Synthesis of Two Degrees-Of-Freedom Rotational Parallel Mechanisms with A Fixed Center-Of-Rotation Based on A Graphic Approach

Design of a novel 3-DoF parallel kinematic mechanism: type synthesis and kinematic optimization.

Type Synthesis of Metamorphic and Axisymmetric Parallel Mechanisms Using Singularity for Deployment and Latch

Topology Synthesis and Classification of Low-Mobility Parallel Mechanisms

Type synthesis of a family of novel parallel leg mechanisms driven by a 3-DOF drive system

Structure synthesis of reconfigurable generalized parallel mechanisms with configurable platforms

Reconfigurable Generalized Parallel Mechanisms with Kinematotropic Linkages

Type Synthesis of a Fully Decoupled Parallel Wrist Manipulator