Abstract:Purpose: A flat-panel detector based mobile isocentric C-arm for cone-beam CT (CBCT) has been developed to allow intraoperative 3D imaging with sub-millimeter spatial resolution and soft-tissue visibility. Image quality and radiation dose were evaluated in spinal surgery, commonly relying on lower-performance image intensifier based mobile C-arms. Scan protocols were developed for task-specific imaging at minimum dose, in-room exposure was evaluated, and integration of the imaging system with a surgical guidance system was demonstrated in preclinical studies of minimally invasive spine surgery. Methods: Radiation dose was assessed as a function of kilovolt (peak) (80-120 kVp) and milliampere second using thoracic and lumbar spine dosimetry phantoms. In-room radiation exposure was measured throughout the operating room for various CBCT scan protocols. Image quality was assessed using tissue-equivalent inserts in chest and abdomen phantoms to evaluate bone and soft-tissue contrast-to-noise ratio as a function of dose, and task-specific protocols (i.e., visualization of bone or soft-tissues) were defined. Results were applied in preclinical studies using a cadaveric torso simulating minimally invasive, transpedicular surgery. Results: Task-specific CBCT protocols identified include: thoracic bone visualization (100 kVp; 60 mAs; 1.8 mGy); lumbar bone visualization (100 kVp; 130 mAs; 3.2 mGy); thoracic soft-tissue visualization (100 kVp; 230 mAs; 4.3 mGy); and lumbar soft-tissue visualization (120 kVp; 460 mAs; 10.6 mGy)--each at (0.3 x 0.3 x 0.9 mm3) voxel size. Alternative lower-dose, lower-resolution soft-tissue visualization protocols were identified (100 kVp; 230 mAs; 5.1 mGy) for the lumbar region at (0.3 x 0.3 x 1.5 mm3) voxel size. Half-scan orbit of the C-arm (x-ray tube traversing under the table) was dosimetrically advantageous (prepatient attenuation) with a nonuniform dose distribution (-2 x higher at the entrance side than at isocenter, and -3-4 lower at the exit side). The in-room dose (microsievert) per unit scan dose (milligray) ranged from -21 microSv/mGy on average at tableside to -0.1 microSv/mGy at 2.0 m distance to isocenter. All protocols involve surgical staff stepping behind a shield wall for each CBCT scan, therefore imparting -zero dose to staff. Protocol implementation in preclinical cadaveric studies demonstrate integration of the C-arm with a navigation system for spine surgery guidance-specifically, minimally invasive vertebroplasty in which the system provided accurate guidance and visualization of needle placement and bone cement distribution. Cumulative dose including multiple intraoperative scans was -11.5 mGy for CBCT-guided thoracic vertebroplasty and -23.2 mGy for lumbar vertebroplasty, with dose to staff at tableside reduced to -1 min of fluoroscopy time (-4(0-60 microSv), compared to 5-11 min for the conventional approach. Conclusions: Intraoperative CBCT using a high-performance mobile C-arm prototype demonstrates image quality suitable to guidance of spine surgery, with task-specific protocols providing an important basis for minimizing radiation dose, while maintaining image quality sufficient for surgical guidance. Images demonstrate a significant advance in spatial resolution and soft-tissue visibility, and CBCT guidance offers the potential to reduce fluoroscopy reliance, reducing cumulative dose to patient and staff. Integration with a surgical guidance system demonstrates precise tracking and visualization in up-to-date images (alleviating reliance on preoperative images only), including detection of errors or suboptimal surgical outcomes in the operating room.

APPLICATIONS PORTABLE BEDSIDE CT-CERETOM IN THE OPERATING ROOM

Study on the Optimized Scanning Conditions of Cerebral CT Angiography Based on the Angiographic CT Head Phantom

Clinical Application of Mobile CT in Neurosurgical Disorders

Value of neuroendoscope in the treatment of hypertensive cerebral hemorrhage in the emergency department

The Applications of Mobile CT in Neurosurgical Operation

Ambulance-mounted Mobile CT Scanner Used for Head Scanning in M-Health Application

Portable 3D-Head Computed Tomography (CT) Navigation-Guided Key-Hole Microsurgery for Spontaneous Hypertensive Hemorrhages

Effects of Mobile CT and Conventional CT Scanning on Secondary Cerebral Pathological Injury and Therapeutic Effect Following Brain Trauma

Clinical application of perfusion computed tomography in neurosurgery

Comparison of Time Efficiency of New-Type Homemade 16-Slice Mobile CT and Conventional CT in the Neurosurgery Intensive Care Unit

Treatment of Supratentorial Spontaneous Intracerebral Hemorrhage Using Image-Guided Minimally Invasive Surgery: Initial Experiences of a Flat Detector CT–Based Puncture Planning and Navigation System in the Angiographic Suite

Novel 16-Slice Mobile CT Head Scan in 391 Patients

Application of flat-panel detector CT for detecting cerebral blood volume in management of acute ischemic stroke

Application of quick percutaneous puncture drainage technique according to CT scanning to treat hypertensive in-tracerebral hemorrhage

Comparative analysis of head scan results of bedside mobile CT and conventional CT in intensive care patients

Brain Imaging Using Mobile CT: Current Status and Future Prospects

Research on Application of Portable Ultrasonography in Craniocerebral Injury Sustained in Sea Battle

WE‐AB‐207A‐03: A CBCT Head Scanner for Point‐Of‐Care Imaging of Intracranial Hemorrhage

Development and Clinical Translation of a Cone-Beam CT Scanner for High-Quality Imaging of Intracranial Hemorrhage

Mobile C-arm cone-beam CT for guidance of spine surgery: image quality, radiation dose, and integration with interventional guidance

Application of CT angiography in emergency microsurgery of spontaneous intracerebral hemorrhage without hypertension