Abstract:Platform and wall vaporization for electrothermal vaporization (ETV)-inductively coupled plasma mass spectrometry (ICP-MS) determination of some refractory elements (Ti, V, Cr, Mo, La and Zr) and Pb were comparatively studied with the use of poly (tetrafluoroethylene) (PTFE) as fluorinating reagent. The factors affecting the vaporization behaviors of the target analytes in the platform and tube wall vaporization including vaporization temperature and time, pyrolytic temperature and time were studied in detail, and the flow rates of carrier gas/auxiliary carrier gas, were carefully optimized. Under the optimal conditions, the signal profiles, signal intensity, interferences of coexisting ions and analytical reproducibility for wall and platform vaporization ETV–ICP-MS were compared. It was found that both wall and platform vaporization could give very similar detection limits, but the platform vaporization provided higher signal intensity and better precision for some refractory elements and Pb than the wall vaporization. Especially for La, the signal intensity obtained by platform vaporization was 3 times higher than that obtained by wall vaporization. For platform vaporization ETV–ICP-MS, the limits of detection (LODs) of 0.001μgL−1 (La) ~0.09μgL−1 (Ti) with the relative standard deviations (RSDs) of 1.5% (Pb) ~15.5% (Zr) were obtained. While for wall vaporization ETV–ICP-MS, LODs of 0.005μgL−1 (La) ~0.4μgL−1 (Pb) with RSDs of 3.2% (Mo) ~12.8% (Zr) were obtained. Both platform and tube wall vaporization techniques have been used for slurry sampling fluorination assisted ETV–ICP-MS direct determination of Ti, V, Cr, Mo, La, Zr and Pb in certified reference materials of NIES No. 8 vehicle exhaust particulates and GBW07401 soil, and the analytical results obtained are in good agreement with the certified values.

Micro-Column Separation/Pre-Concentration Combined with Fluorinating Electrothermal Vaporisation-Inductively Coupled Plasma-Mass Spectrometry for Determination of Trace Refractory Elements in Seawater, Soil and Sediment

Determination of the Trace Refractory Elements V, Nb and Ta in Environmental Samples by ICP-MS After Separation and Preconcentration with Nanometre-Sized Alumina Microcolumns Following Chemical Modification by Gallic Acid

Direct determination of trace refractory elements in human serum by ETV–ICP–MS with in-situ matrix removal

Flow Injection On-Line Solid Phase Extraction Coupled with Inductively Coupled Plasma Mass Spectrometry for Determination of (ultra)trace Rare Earth Elements in Environmental Materials Using Maleic Acid Grafted Polytetrafluoroethylene Fibers As Sorbent

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Flow injection on-line preconcentration with an ion-exchange resin coupled with microwave plasma torch-atomic emission spectrometry for the determination of trace rare earth elements

Determination of niobium, tantalum, zirconium and hafnium in geological materials by extraction chromatography and inductively coupled plasma mass spectrometry

Determination of Trace Amounts of Rare Earth Elements by ETV-ICP-AES Combined with Microcolumn Separation/Preconcentration

Separation and Microcolumn Preconcentration of Traces of Rare Earth Elements on Nanoscale TiO2 and Their Determination in Geological Samples by ICP‐AES

A Novel Capillary Microextraction on Ordered Mesoporous Titania Coating Combined with Electrothermal Vaporization Inductively Coupled Plasma Mass Spectrometry for the Determination of V, Cr and Cu in Environmental and Biological Samples.

Microcolumn separation and preconcentration of rare earth elements as pyrocatechol violet complexes on anthracene-cetyltrimethyl ammonium bromide adsorbent and their determination in environmental samples by ICP-OES

Polymer Monolithic Capillary Microextraction Combined On-Line with Inductively Coupled Plasma MS for the Determination of Trace Rare Earth Elements in Biological Samples.

Ti-containing mesoporous silica packed microcolumn separation/preconcentration combined with inductively coupled plasma-mass spectrometry for the determination of trace Cr, Cu, Cd and Pb in environmental samples

Multi-Wall Carbon Nanotubes Chemically Modified Silica Microcolumn Preconcentration/Separation Combined With Inductively Coupled Plasma Optical Emission Spectrometry For The Determination Of Trace Elements In Environmental Waters

Nanometer-size Titanium Dioxide Microcolumn On-Line Preconcentration of Trace Metals and Their Determination by Inductively Coupled Plasma Atomic Emission Spectrometry in Water

Determination of trace rare earth elements by inductively coupled plasma optical emission spectrometry after preconcentration with immobilized nanometer titanium dioxide

Gold Nanoparticles As Intermediate Ligands for Polymer Monolithic Capillary Microextraction of Trace Rare Earth Elements Followed by Inductively Coupled Plasma Mass Spectrometry Detection

Determination of some refractory elements and Pb by fluorination assisted electrothermal vaporization inductively coupled plasma mass spectrometry with platform and wall vaporization

Solid Phase Extraction of Rare Earth Elements in Deep Groundwater with Multi-wall Carbon Nanotubes As Adsorbent for the Determination by Inductively Coupled Plasma Mass Spectrometry

High-yield Sample Introduction Using Nebulized Film Dielectric Barrier Discharge Assisted Chelate Vapor Generation for Trace Rare Earth Elements Determination by Inductively Coupled Plasma Mass Spectrometry

Nanometer-sized Zirconium Dioxide Microcolumn Separation/preconcentration of Trace Metals and Their Determination by ICP-OES in Environmental and Biological Samples