Abstract:To overcome the limitation of existing methods only identifying basic dynamic properties of bridge structures, a moving vehicle strategy was proposed to identify more meaningful parameters including mass-normalized mode shapes and structural flexibility matrix, which can be further adopted for static deflection prediction and condition assessment of bridge structures. The contribution of this article is to investigate the intrinsic relationship between mass-normalized scaling factor and time-varying modal parameters identified from moving vehicle-induced responses. In the proposed method, the variational mode decomposition (VMD) algorithm was firstly utilized to decompose vehicle-induced responses into several intrinsic mode function (IMFs), then time-varying frequencies of the vehicle-bridge coupled system are identified by performing Hilbert transform of each IMF; Second, the relationship between mass-normalized scaling factor and time-varying dynamic properties of the coupled system was theoretically derived, and structural flexibility matrix was computed by combining calculated scaling factor and dynamic properties of the bridge without moving vehicle; Finally, a numerical example of simply supported bridge was employed to verify the correctness of proposed method, in which influences of predefined parameters (i.e. penalty parameter and number of decomposed IMFs) in VMD algorithm, road roughness, measurement noise, vehicle weight, vehicle spring and driving speed on identification results were investigated. To further verify the correctness of this method, an experimental model of steel beam was designed in the laboratory for structural flexibility identification and static deflection prediction. A good agreement between predicted deflections using the proposed method and directly measured values by using displacement transducers has successfully verified the proposed method.

Identification and Parametric Analysis of Moving Loads on Bridges

Identification Method for Moving Loads over Continuous Beam Based on Bending Moment Influence Lines

PRACTICAL ASPECTS IN MOVING LOAD IDENTIFICATION

Dynamic load allowance in different positions of the multispan girder bridge with variable crosssection

Dynamic response of continuous girder bridge under moving vehicular loads

Dynamic responses of a three-span continuous girder bridge with variable cross-section based on vehicle–bridge coupled vibration analysis

Analysis of the Moving-Load-Induced Vibrations of a Nonlinearly Connected Floating Bridge

IDENTIFICATION OF VEHICLE AXLE LOADS FROM BRIDGE DYNAMIC RESPONSES

Impact Effect Analysis for a Continuous Concrete Curved Bridge Due to Multi-Vehicle Loading

Dynamic Response Analysis of Multi-Span Bridge-Track Structure System under Moving Loads

Moving Load Identification of Small and Medium-Sized Bridges Based on Distributed Optical Fiber Sensing

Dynamic Responses of Long Span Continuous Girder Bridges Under Action of Moving Vehicle Loads

ORTHOGONAL FUNCTION IN MOVING LOADS IDENTIFICATION ON A MULTI-SPAN BRIDGE

Vibration Analysis of Prestressed Concrete Bridge Subjected to Moving Vehicles

Damage Identification and Bearing Capacity Evaluation of Bridges Based on Distributed Long-Gauge Strain Envelope Line under Moving Vehicle Loads

Dynamic Modeling and Analysis of Multi-Span Timoshenko Beams Under Moving Loads

Frequency Identification of Equal-Span Continuous Girder Bridge Based on Moving Vehicle Responses

Damage identification in continuous beam based on dynamic response from moving vehicle loads

An Engineering Approach To Dynamic Stress Analysis Of Long Suspension Bridges Under Multi-Loading

Theoretical and Experimental Study on Vibration Modal for Simply Supported Bridge

Structural Flexibility Identification Via Moving-Vehicle-induced Time-Varying Modal Parameters