Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

Removal of Phosphorus from PO_4~(3-) and F~- Containing Wastewater by Zr(Ⅳ) Immobilized on Collagen Fiber

Alkali-Treated Yttrium-Containing Chitosan-Based Hydrogel Beads for Phosphate Removal from Aqueous Solutions

Alkali-treated Yttrium-Containing Chitosan-Based Hydrogels for Phosphate Recover with Highly Selective in Wide Ph Aqueous Solution

Renewable Adsorbents for Selective Phosphorus Removal: Co(OH) 2 -Derived ZIF-67 on Anion Exchange Resin

Selective Removal of Phosphate in Waters Using a Novel of Cation Adsorbent: Zirconium Phosphate (zrp) Behavior and Mechanism

Removal of Phosphate by Adsorption with 2-Phenylimidazole-Modified Porous ZIF-8: Powder and Chitosan Spheres

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Zirconium-modified biochar as the efficient adsorbent for low-concentration phosphate: performance and mechanism

Co-immobilization of clinoptilolite and nanostructured hydrated ferric-zirconium binary oxide via polyvinyl alcohol-alginate covalent cross-linking for simultaneous deep removal of aqueous low-level nitrogen and phosphorus

Magnetically separable ZrO2@SiO2@Fe3O4 for selective phosphate removal from wastewater

Removal of phosphate from wastewater using zirconium/iron embedded chitosan/alginate hydrogel beads: An experimental and computational perspective

Phosphorus removal and recovery from water with macroporous bead adsorbent constituted of alginate-Zr4+ and PNIPAM-interpenetrated networks

Phosphate removal by ZIF-8@MWCNT hybrids in presence of effluent organic matter: Adsorbent structure, wastewater quality, and DFT analysis

Highly Efficient and Rapid Fluoride Scavenger Using an Acid/base Tolerant Zirconium Phosphate Nanoflake: Behavior and Mechanism

Adsorptive Removal of Phosphate by Magnetic Fe3O4@C@ZrO2

Enhanced Phosphate Removal Using Zirconium Hydroxide Encapsulated in Quaternized Cellulose

Efficient Capture of Phosphate From Aqueous Media Using Bimetallic La‐Zr‐MOF

Phosphate removal from aqueous solutions with a zirconium-loaded magnetic biochar composite: performance, recyclability, and mechanism

Kinetics and mechanism of adsorption of phosphate on fluorine-containing calcium silicate

Fluoride removal from drinking water by zirconium-impregnated fibrous protein

Facile fabrication of bimetallic collagen fiber particles via immobilizing zirconium on chrome-tanned leather as adsorbent for fluoride removal from ground water near hot spring