Abstract:Refining Kraft pulp into dissolving pulp preparation methods are generally has been limited by aggressive chemical input and overlook of xylan component valorization. This work demonstrated an integrated process of deep eutectic solvents (DESs) pretreatment followed by mechanical refining and enzymatic hydrolysis (DME) for the dissolving pulp preparation and the co-production of two xylo-oligosaccharides (XOSs). The technical feasibility of the DME process was assessed with typical bleached bamboo and poplar Kraft pulp. It was shown the employed aqueous alkaline DES consisting of choline hydroxide and urea (40% concentration) could initially purify cellulose while selectively extracting alkali-soluble XOS by the unique bonding behavior of DES. The resulting dissolving pulp showed considerably high cellulose content of 94.3% and 91.1% for bleached bamboo pulp and bleached poplar pulp respectively. The overall cascade process significantly improved cellulose reactivity and quality (α-cellulose > 90%, S10/S18 < 8%) which could meet the high criterion of commercial dissolving pulp while extracting 69.4% content of high-purity XOS. When 100 g bleached pulp was subjected to the technology route, over 80 g high cellulose yield was obtained for both substrates, while simultaneously producing the alkaline and water-soluble XOS (total approximately 10 g respectively). It was proposed that the strong hydrogen bonding accepting ability of the ChOH-Urea DES system could purify cellulose through XOS selective solubilization while swelling cellulose to ease the subsequent mechanical fibrillation. Then the mechanically treated cellulose with enhanced accessibility to xylanase provided an additional technique opportunity for further cellulose purification through facile enzymatic hydrolysis. Therefore, this proposed integrated technique could refine bleached Kraft pulp into dissolving pulp with enhanced cellulose reactivity while co-producing high-purity XOS product streams.

Optimization of Oxygen Delignification of Fast-Growing Eucalyptus Kraft Pulp

Oxygen Delignification of Kraft Pulp of Whole Stalk Kenaf

The Dual Effect of Ionic Liquid Pretreatment on the Eucalyptus Kraft Pulp during Oxygen Delignification Process

Optimization for softing refining process of kenaf fiber with alkali and hydrogen peroxide in one step

Deoxylapachol in Tectona grandis wood as a catalyst for delignification and carbohydrate protection during the kraft cooking of eucalyptus wood

Sulfite-Formaldehyde Pulping and Oxygen Delignification of Wheat Straw

Delignification of Sugarcane Bagasse with Alkali and Peracetic Acid and Characterization of the Pulp

Addition of green and black liquor in kraft pulping of Eucalyptus dunnii wood: possible solutions for the problems with kraft pulping caused by high calcium content

Delignification Reaction Course of Poplar Kraft Pulping with Green Liquor Pretreatment

Evaluation of Organosolv Pretreatment on the Structural Characteristics of Lignin Polymers and Follow-Up Enzymatic Hydrolysis of the Substrates from Eucalyptus Wood.

Optimization of Integrated Electrochemical Oxidation and Biodegradation (EO‐BD) for Kraft Lignin

Combination of steam explosion and laccase-mediator treatments prior to Eucalyptus globulus kraft pulping

Comparative Evaluation Of Organic Acid Pretreatment Of Eucalyptus For Kraft Dissolving Pulp Production

Green wood pulping processes with high pulp yield and lignin recovery yield by deep eutectic solvent and its aqueous solutions

Research on Milox Pulping of Non-Wood Raw Material

Relationship between the Change in E/T Ratio and the Cooking Performance of Eucalyptus and Acacia Woods during Kraft Pulping Process

Single-Stage Pulping of Sugarcane Bagasse with Peracetic Acid

Complete conversion of bleached Kraft pulp into dissolving pulp and two xylo-oligosaccharides through a deep eutectic solvent assisted biorefinery

Efficient removal of residual lignin from eucalyptus pulp via high-concentration chlorine dioxide treatment and its effect on the properties of residual solids

Application of Alkaline Ionic Liquids in the Pretreatment Process of Eucalyptus Kraft Pulping

Effect of chemical composition and wood property on kraft pulping of eucalyptus